Valid

GB/T 36513-2018Mobile road construction machinery—Safety requirements for compaction machines (English PDF)

移动式道路施工机械夯实机械安全要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (21 pages)

Need quotation for your management?

Get a formal quotation for GB/T 36513-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 13, 2018

Implementation date

February 1, 2019

Scope

GB/T 36513-2018 is the English-translated version of 移动式道路施工机械夯实机械安全要求.

GB/T 36513-2018 sets the safety requirements for compaction machines used in road construction, namely vibratory plates and vibratory rammers. It supplements GB 26504, the general safety standard for mobile road construction machinery, and is used together with it; where the two differ, its specific requirements take precedence.

It addresses the significant hazards, hazardous situations and events that can arise in intended use and reasonably foreseeable misuse, with the list of significant hazards, the safety requirements and protective measures, how they are verified, and the information for use.

Normative annexes deal with remote control of operator-controlled machines, the noise test procedure for vibratory plates and vibratory rammers, and hand-arm vibration measurement on walk-behind vibratory compaction machines. It was issued on 13 July 2018 and has applied since 1 February 2019.

Found what you need?

Document preview — GB/T 36513-2018

National Standard of the People's Republic of China

ICS: 91.220
Classification: P 97

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword
1 Scope
2 Normative references
3 Terms and Definitions
4 Major Hazard List
5 Safety requirements and/or protective measures
6 Confirmation of safety requirements and/or protective measures
7 Use information
Appendix A (Normative) Operator-controlled machine remote control
Appendix B (normative appendix) Vibratory plate and vibratory rammer noise test procedures
Appendix C (Normative) Hand-arm vibration measurement for walk-behind vibrating tamping machines
Reference

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the safety requirements for compacting machinery and all weights that may occur under predetermined use and reasonably foreseeable misuse conditions. Big dangers, dangerous states and events.

This standard supplements the specific requirements for compacting machinery on the basis of GB 26504. This standard is used in conjunction with GB 26504. this The specific requirements of the standard take precedence over the general requirements of GB 26504.

This standard applies to vibratory plates and vibratory rammers.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 3767 Acoustic Sound Pressure Method for Measuring the Sound Field of Noise Source and the Approximate Free Field Above the Reflecting Surface of Acoustic Energy Level

GB 5226.1-2008 Mechanical electrical safety machinery and electrical equipment - Part 1. General technical conditions

GB/T 15619 Mechanical vibration and impact human exposure vocabulary

GB/T 15706 Mechanical Safety Design General Risk Assessment and Risk Reduction

GB/T 16855.1-2008 Safety of machinery - Safety systems - Part 1. General rules

GB/T 16935 (all parts) Insulation coordination of equipment in low voltage systems

GB/T 17248.2 Measurement of sound pressure levels emitted by acoustic machinery and equipment and other specified positions Engineering method for approximating free field above a reflecting surface

GB/T 25631-2010 Mechanical vibration hand-held and hand-guided mechanical vibration evaluation rules

GB 26504-2011 General safety requirements for mobile road construction machinery

3 Terms and definitions

The following terms and definitions as defined in GB/T 15706 apply to this document.

3.1 Compaction machine

Tamping materials such as rock fillers, soil or asphalt layers by the impact or vibration of the work tool or a combination of the two functions Machine.

Note: It can be divided into self-propelled or installed in other forms of carrying machinery. The operator can directly control the tamping machinery by physical contact (in carrying Mechanically control the control device or the control device mounted directly on the machine with the accompanying control, or indirectly control the compaction machine without physical contact (See Appendix A for wired remote or wireless remote control).

3.2 Vibratory plate

A tamping machine that vibrates and horizontally moves a flat bottom plate by directional vibration.

Note 1. The tamping of the material is done by the vibration of the working tool.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.

Referenced standards

Normative references

GB 5226.1-2008 · GB/T 16935

Similar standards

GB/T 32543-2026|GB/T 47397-2026|GB 45943-2025|GB/T 25641-2025|GB/T 25643-2025|GB/T 45874-2025

How to Download GB/T 36513-2018

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.