GB/T 34936-2017Technical requirement of combiner box for photovoltaic power station (English PDF)
光伏发电站汇流箱技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34936-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 1, 2017
Implementation date
May 1, 2018
Scope
GB/T 34936-2017 is the English-translated version of 光伏发电站汇流箱技术要求.
GB/T 34936-2017 is the Chinese standard "Technical requirement of combiner box for photovoltaic power station". Its scope clause reads: This standard specifies the technical requirements for PV combiner boxes, test methods, inspection rules, marking, packaging, transportation and storage and other technical requirements.
This standard applies to photovoltaic power generation system DC combiner box. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 34936-2017
National Standard of the People's Republic of China
- ICS
- 27.160
- Classification
- F 12
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 basic provisions
- 5 environmental conditions
- 6 technical requirements
- 7 Test Method
- 8 test
- 9 signs, labels, user manual
- 10 packaging, transportation, storage
- 11 other
1 Scope
This standard specifies the technical requirements for PV combiner boxes, test methods, inspection rules, marking, packaging, transportation and storage and other technical requirements.
This standard applies to photovoltaic power generation system DC combiner box.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 7251.1 Low-voltage switchgear and control equipment - Part 1. General
GB/T 9969 Industrial Products Manual General
GB/T 13384 mechanical and electrical product packaging General technical conditions
GB/T 16935.1 Insulation coordination of equipment in low-voltage systems - Part 1. Principles, requirements and tests
GB/T 17626.2 Electromagnetic compatibility test and measurement techniques Electrostatic discharge immunity test
GB/T 17626.4 Electromagnetic compatibility test and measurement techniques fast transient burst immunity test
GB/T 17626.5 electromagnetic compatibility test and measurement techniques surge (impact) immunity test
GB/T 34933 Photovoltaic Power Station Box Test Technical Specification
GB/T 32512 Photovoltaic Power Plant lightning protection technical requirements
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 PV power system
A solar power generation system using solar cells to directly convert solar radiation into electrical energy.
3.2 PV module string PVstring
In photovoltaic power generation system, a number of photovoltaic modules in series, the formation of a certain DC output circuit unit.
3.3 Combiner box
In the photovoltaic power generation system will be a number of PV modules connected in series after the convergence of the device.
Note 1. The first-level confluence box is a first-level confluence device that directly confluence PV modules in series.
Note 2. The second-level combiner box, the current output from the first-level combiner box, is confiscated again in parallel.
3.4 Standard test conditions standardtestconditions; STC
The standard test conditions are as follows. solar cell temperature 25 ° C, AM 1.5, irradiance of light source measured with a standard solar cell 1000 W/m2
With a standard solar irradiance distribution.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 43056-2023Technical requirements for photovoltaic power station in desert areas
- GB/T 42006-2022Specification for inspection of plateau photovoltaic power generation equipment
- GB/T 36115-2018Targeted poverty alleviation—Technical guide of village photovoltaic power station
- GB/T 36568-2018Code of maintenance for photovoltaic module array
Similar standards
How to Download GB/T 34936-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 34936-2017
$185.00