Valid

GB/T 33606-2017Flexible and torsion resistant cables of rated voltages from 6 kV(Um = 7.2 kV) up to 35 kV (Um = 40.5 kV) for wind power generation (English PDF)

额定电压6kV(Um=7.2kV)到35kV(Um=40.5kV)风力发电用耐扭曲软电缆

Preview PDF

This is a limited preview

Buy now to download the full PDF (33 pages)

Need quotation for your management?

Get a formal quotation for GB/T 33606-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 12, 2017

Implementation date

December 1, 2017

Scope

GB/T 33606-2017 is the English-translated version of 额定电压6kV(Um=7.2kV)到35kV(Um=40.5kV)风力发电用耐扭曲软电缆.

GB/T 33606-2017 is the Chinese standard "Flexible and torsion resistant cables of rated voltages from 6 kV(Um = 7.2 kV) up to 35 kV (Um = 40.5 kV) for wind power generation".

Its scope clause reads: This standard specifies the characteristics of the use of twisted flexible cables, product codes, logos, technical requirements, inspection rules, test methods and packaging Claim.

This standard applies to high-power wind power equipment in the turbine and tower connection or similar occasions with rated voltage 6kV ~ 35kV Anti-twist flexible cable for wind power generation. Its clauses include normative reference documents.

Found what you need?

Document preview — GB/T 33606-2017

National Standard of the People's Republic of China

ICS: 29.060.20
Classification: K 13

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 normative reference document
3 Terms and definitions
4 Use Features
5 code, model, specification and product representation
6 conductor
7 Insulation
8 shield
9 metal shield
10 three-core cable into the cable and fill
11 Sheath
12 Test conditions
13 routine test
14 sample test
15 Electrical Type Test
16 Non-electrical type test
19 cable identification mark
21 Cable packaging, transport and storage
Appendix A (normative) Semi - conductive shielding resistivity measurement method
Appendix B (Normative Appendix) Torsion Test
Appendix C (Normative Appendix) Load Test
Appendix D (normative) Low temperature bending test of finished cable
Appendix E (Normative Appendix) Artificial Climate Aging Test
Appendix F (normative) Salt spray test

1 Scope

This standard specifies the characteristics of the use of twisted flexible cables, product codes, logos, technical requirements, inspection rules, test methods and packaging

Claim.

This standard applies to high-power wind power equipment in the turbine and tower connection or similar occasions with rated voltage 6kV ~ 35kV

Anti-twist flexible cable for wind power generation.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 156-2007 standard voltage

GB/T 2423.17-2008 Environmental testing for electric and electronic products - Part 2. Test methods Test Ka. Salt mist

GB/T 2423.18-2012 Environmental tests - Part 2. Test methods Test Kb. Salt mist, alternating (sodium chloride solution)

GB/T 2900.10 Electrical terminology

GB/T 2951.11-2008 Cables and cables - Common test methods for insulating and sheathing materials - Part 11. General test methods

Measurement of mechanical properties of thickness and dimensions

GB/T 2951.12-2008 Cables and cables - Common test methods for insulating and sheathing materials - Part 12. General test methods

Thermal aging test method

GB/T 2951.13-2008 Cables and cables - Common test methods for insulating and sheathing materials - Part 13. General test methods

Density measurement method Water absorption test Shrink test

GB/T 2951.14-2008 Cables and cables - Common test methods for insulating and sheathing materials - Part 14. General test methods

Low temperature test

GB/T 2951.21-2008 Cables and cables - Common test methods for insulating and sheathing materials - Part 21. Elastomer mixtures

Test method for ozone resistance - Thermal test of mineral oil

GB/T 2951.31-2008 Cables and cables - Common test methods for insulating and sheathing materials - Part 31. Polyvinyl chloride mixtures

Special test methods - High temperature pressure test - Anti - cracking test

GB/T 3048.4-2007 Test methods for electrical performance of wire and cable - Part 4. Conductor DC resistance test

Test methods for electrical properties of electric cables and wires - Part 5. Insulation resistance test GB/T Test methods for electrical properties of electric cables and wires - Part 8. AC voltage test GB/T GB/T 3048.10-2007 Test methods for electrical performance of wire and cable - Part 10. Extruded sheath spark test

GB/T 3048.11-2007 Test methods for electrical performance of wire and cable - Part 11. Dielectric loss tangent test

GB/T 3048.12-2007 Test methods for electrical performance of wire and cable - Part 12. Partial discharge test

Test methods for electrical properties of electric cables and wires - Part 13. Impulse voltage test GB/T 3048.13-2007

Conductor of cable GB/T 3956-2008

Test methods for bare wires - Part 2. Dimensions measurement GB/T 4909.2

Tinned copper wire […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 33 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

GB/T 13849-2025|GB/T 22577-2025|GB/T 3048.11-2025|GB/T 3048.13-2025|GB/T 3048.4-2025|GB/T 3048.8-2025

How to Download GB/T 33606-2017

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.