GB/T 33566-2017Pusher submersible agitator (English PDF)
潜水推流式搅拌机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33566-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 12, 2017
Implementation date
December 1, 2017
Scope
GB/T 33566-2017 is the English-translated version of 潜水推流式搅拌机.
GB/T 33566-2017 covers the pusher submersible agitator, the submerged mixer that stirs a liquid and pushes it along at the same time. It sets out the terms and definitions, the classification and designation, the technical requirements, the inspection methods and rules, and the marking, packaging, transport and storage of the machine.
It applies to the mixing and flow-pushing duty in municipal sewage works, industrial wastewater plants and water treatment plants, including the stirring of mud and water mixtures, and also to surface water treatment and to creating an artificial current.
Clause 2 cites the standards for its parts and materials: alloy structural steel, rolling bearings, fastener mechanical properties, O-rings, gear load capacity and accuracy, rubber-insulated flexible cable, mechanical seals and stainless steel wire rope. It was issued on 12 May 2017 and has applied since 1 December 2017.
Found what you need?
Document preview — GB/T 33566-2017
National Standard of the People's Republic of China
- ICS
- 13.030.40
- Classification
- J 88
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative reference documents
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the terms and definitions of diving push mixers, classification and naming, technical requirements, inspection methods, inspection rules, marking, Packaging, transportation and storage.
This standard applies to municipal sewage, industrial wastewater treatment plant (station), water treatment plant (station), the mixture of mud to stir, mix And push the flow with the diving push mixer; also applies to the water surface of the source of governance, artificial flow on the water, swimming with diving and flow mixer.
2 Normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this document. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 191 packaging and storage icon
GB/T 307.3-2005 General technical rules for rolling bearings
GB 755 Rotating motor quota and performance
GB/T 2828.1 Sampling inspection procedures Part 1: Batch inspection sampling plan for retrieval by quality limit (AQL)
GB/T 3077 alloy structural steel
GB/T 3098.1-2010 Mechanical properties - Fasteners - Bolts, screws and studs
GB/T 3098.2-2015 Fasteners - Mechanical properties nuts
GB/T 3098.6-2014 Fasteners - Mechanical properties - Stainless steel bolts, screws and studs
GB/T 3098.15-2014 Mechanical properties of fasteners - Stainless steel nuts
GB/T 3452.1 O-shaped rubber seals for hydraulic applications - Part 1: Dimensions series and tolerances
GB/T 3480.5 Calculation of carrying capacity of spur gears and helical gears - Part 5: Strength and quality of materials
GB/T 3797 Electrical control equipment
GB/T 3811 crane design specifications
GB/T 4942.1-2006 Protection class (IP code) classification of the overall structure of rotating electrical machines
GB/T 4956 Magnetic properties of non - magnetic coatings on magnetic substrates
GB/T 5013.4 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 4: Flexible and flexible cables
GB 5903 industrial closed gear oil
GB/T 6556 Mechanical seal type, main dimensions, material and identification markings
GB/T 6822 hull anti - fouling anti - rust paint system
GB/T 7324 Universal Lithium Grease
GB/T 9239.1 Mechanical vibration - Constant (rigid) rotor balance - Quality requirements - Part 1: Testing of tolerances and tolerances
GB/T 9944 stainless steel wire rope
GB/T 9969 General rules for the use of industrial products
GB/T 10095.1-2008 Accuracy of cylindrical gears - Part 1: Definitions and permissible values for deviation of the same side teeth
GB/T 10095.2-2008 Accuracy of cylindrical gears - Part 2: Definition and allowable values for radial integrated deviation and radial runout
GB/T 12785 Test method for submersible pump
GB/T 13306 signs
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 307.3-2005Rolling bearings - General technical regulations
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 3077Alloy Structure Steels
- GB/T 3098.1-2010Mechanical properties of fasteners - Bolts, screws and studs
- GB/T 3098.2-2015Mechanical properties of fasteners - Part 2: Nuts
GB 755 · GB/T 4942.1-2006
Similar standards
How to Download GB/T 33566-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5903-2011 — Gear oils for industrial enclosed gear system
GB/T 12785-2014 — Test methods for submersible motor-pumps
GB/T 13306-2011 — Plates
Secure payment via Stripe
Payments accepted
GB/T 33566-2017
$235.00