GB/T 3300-2008Standard test method for deformation measurement of domestic ceramic ware (English PDF)
日用陶瓷器变形检验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 3300-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 28, 2008
Implementation date
December 1, 2008
Scope
GB/T 3300-2008 is the English-translated version of 日用陶瓷器变形检验方法.
GB/T 3300-2008 is the Chinese standard "Standard test method for deformation measurement of domestic ceramic ware". Its scope clause reads: This standard specifies the test method for deformation ceramic ware.
This standard applies to pottery, stoneware, porcelain, excluding special-shaped products. Its clauses include terms and definitions; determination of deformed flat products.
Found what you need?
Document preview — GB/T 3300-2008
National Standard of the People's Republic of China
- ICS
- 81.060.20
- Classification
- Y 24
- Replacing
- GB/T 3300-1991
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Terms and definitions
- 4 Determination of deformed flat products
- 4.1 Measuring Tools
1 Scope
This standard specifies the test method for deformation ceramic ware.
This standard applies to pottery, stoneware, porcelain, excluding special-shaped products.
2 Terms and definitions
The following terms and definitions apply to this standard.
2.1
Rim height difference between the maximum and minimum height.
2.2
The maximum difference between the diameter and the minimum diameter of the outer diameter.
2.3
From the article inside rim level to the lowest depth of 25mm or less flat ceramics.
2.4
Products from rim to the horizontal plane is greater than the minimum internal depth of 25mm ceramic products.
Principle 3
With a rim height difference characterize the deformation of flat products; poor characterization of deformation outer diameter of the hollow article.
4 Determination of deformed flat products
4.1 Measuring Tools
4.1.1 Glass plates
Use 10 test precision flatness ruler glass plate, a glass plate and requires no significant gap between the ruler. Glass panel size
Should be greater than the size of the test article.
4.1.2 Wedge foot
Wedge feet long 220mm, width 6mm, an upper edge width of 0.2mm ~ 0.5mm (see Figure 1). Bottom surface height error <=0.05mm. bottom
Surface flatness <=0.05mm, the requirements of surface roughness of engraved lines and clear scale.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 3300
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 3300-2008 | Standard test method for deformation measurement of domestic ceramic ware | current edition | Current |
| GB/T 3300-1991 | Standard test method for deformation measurement of domestic ceramic ware | previous edition | Superseded |
This page sells the current edition, GB/T 3300-2008. Earlier editions are listed for reference only.
How to Download GB/T 3300-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 3300-2008
$85.00