GB/T 32221-2015Vacuum technology—Vacuum thermal environmental simulation test equipment of spacecraft—General specification (English PDF)
真空技术 航天器用真空热环境模拟试验设备 通用技术条件
This is a limited preview
Buy now to download the full PDF (18 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32221-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 10, 2015
Implementation date
January 1, 2017
Scope
GB/T 32221-2015 is the English-translated version of 真空技术 航天器用真空热环境模拟试验设备 通用技术条件.
GB/T 32221-2015 is the Chinese standard "Vacuum technology—Vacuum thermal environmental simulation test equipment of spacecraft—General specification".
Its scope clause reads: This standard specifies the Space Used vacuum thermal environment simulation test equipment technical requirements, inspection rules, marking, storage, packaging and transportation.
This standard applies to the working pressure 1 × 10-2Pa ~ 1 × 10-4Pa vacuum thermal environment simulation test equipment (hereinafter referred to as the device).
Found what you need?
Document preview — GB/T 32221-2015
National Standard of the People's Republic of China
- ICS
- 23.160
- Classification
- J 78
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 3 Technical requirements
- 4.2 equipment under normal operating conditions
- 4.3 The main technical parameters of the device
- 4.4 Design Requirements
- 4.5 manufacturing requirements
- 4.6 Safety Requirements
- 5 Inspection Rules
- 6 marking, storage, packaging, transportation
- 6.1 marking requirements
- 6.2 Storage requirements
- 6.3 Packaging Requirements
- 6.4 Transport
- Appendix A (normative) Test the vacuum system parameters
- Appendix B (normative) heat sink (or temperature of the soleplate) temperature test
- Annex C (normative) heat sink inner surface of the heat radiation test parameters
1 Scope
This standard specifies the Space Used vacuum thermal environment simulation test equipment technical requirements, inspection rules, marking, storage, packaging and transportation.
This standard applies to the working pressure 1 × 10-2Pa ~ 1 × 10-4Pa vacuum thermal environment simulation test equipment (hereinafter referred to as the device).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 150 (all parts) pressure vessel
GB/T 191 Packaging - Pictorial signs
GB/T 3163 vacuum technology terms
GB/T 4982 Vacuum technology - Quick release couplings - Dimensions - Part 1. Clamping Type
GB/T 6070 vacuum technology flange size
GB/T 6071 ultrahigh vacuum flange
GB/T 12604.7 Terminology for nondestructive testing Leak Detection
GB/T 13384 mechanical and electrical products packaging General technical conditions
GB 16912 Deep frozen production of oxygen and related gas safety technical regulations
GB 50236 field equipment, industrial pipe welding engineering for construction
GJB421 Satellite term
GJB1027A vehicles, upper stage and spacecraft testing requirements
GJB1033A spacecraft thermal equilibrium test methods
GJB2203A satellite product cleanliness and pollution control requirements
GJB2502.2 spacecraft thermal control coatings - Test methods - Part 2. Solar absorption ratio test
GJB2502.3 spacecraft thermal control coatings - Test methods - Part 3. emission rate testing
GJB3489 solar simulator for measuring optical methods
JB/T 1090 J-type vacuum rubber seal type and size
JB/T 1091 JO type and skeleton-type vacuum rubber ring type and dimensions
JB/T 1092 O type rubber sealing ring vacuum type and size
JB/T 4730-2005 (all parts), non-destructive testing of pressure equipment
JB/T 8105.1 rubber seal vacuum gauge fittings
JB/T 10463 vacuum magnetic fluid dynamic seals
NB/T 47010-2010 pressure equipment made of stainless steel and heat-resistant steel forgings
NB/T 47015-2011 steel pressure vessel welding procedure
QJ1386.1B metal material retest provisions of Part 1. Ferrous metals
QJ1386.2B metal material retest provisions of Part 2. non-ferrous metal
QJ1955A term Spacecraft Space Environment […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 3163Vacuum technology - Vocabulary
- GB/T 4982Vacuum technology - Dimensions of clamped-type quick-release couplings
- GB/T 6070Vacuum technology - Dimensions of non-knife edge flanges
- GB/T 6071Ultra-high vacuum flange
- GB/T 12604.7Non-destructive testing - Terminology - Leak testing
GB 150 · GJB 421 · JB/T 4730-2005
Similar standards
How to Download GB/T 32221-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 15037-2006 — Wines
GB 15040-1994 — Working standard lamps for the measurement of luminous flux
GB 15052-2010 — Cranes -- Safety signs and hazard pictorials -- General principles
Secure payment via Stripe
Payments accepted
GB/T 32221-2015
$295.00