GB/T 31301.6-2020Footwear manufacturing machines—Safety requirememts—Part 6: Cementing and cementing drying machines (English PDF)

1 Scope

This part of GB/T 31301 stipulates the definition, design, structure, transportation, installation, adjustment, operation, cleaning

Washing related safety requirements. This part contains the operator ’s expected use of the gluing machine and glue dryer and the foreseeable misuse.

All major hazards, dangerous states, and hazardous events related to the sizing machine and adhesive dryer within the scope of this section (see Appendix A).

This section applies to the gluing machine and adhesive dryer used in the adhesive technology shoemaking (see Appendix B for model diagrams).

This section does not apply to gumming machines used in the leather industry.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article

Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.

GB/T 3766 General rules and safety requirements of hydraulic transmission system and its components

GB/T 5226.1-2019 Mechanical Electrical Safety Mechanical Electrical Equipment Part 1. General Technical Conditions

GB/T 7932 Pneumatic general rules and safety requirements for the system and its components

GB/T 8196-2018 General requirements for the design and manufacture of fixed and movable guards for mechanical safety guards

GB 11291.1-2011 Safety requirements for robots for industrial environments Part 1. Robots

GB/T 14048.5-2017 Low-voltage switchgear and control equipment Part 5-1. Control circuit appliances and switching elements electromechanical

Control circuit appliances

GB/T 15241.2 Ergonomic principles related to psychological load Part 2. Design principles

GB/T 15706-2012 General rules of machinery safety design risk assessment and risk reduction

GB/T 16754-2008 Mechanical safety emergency stop design principles

GB/T 16855.1-2018 Safety related parts of machinery safety control system Part 1. General rules for design

GB/T 17421.5-2015 General rules for machine tool inspection Part 5. Determination of noise emission

GB/T 17454.2 Mechanical safety pressure-sensitive protection devices Part 2. General rules for design and test of pressure-sensitive edges and pressure-sensitive rods

GB/T 17888.1-2008 Safety of machinery entering the fixed installation of machinery. Part 1. Entering the fixed installation between two levels of plane

Shi's choice

GB/T 17888.2-2008 Safety of machinery entering the fixed facilities of machinery. Part 2. Working platform and access

GB/T 18153-2000 Ergonomic data for determining the limit of hot surface temperature by mechanically safe contactable surface temperature

GB/T 18209.1 Electrical and mechanical safety instructions, signs and operations Part 1. Requirements for visual, auditory and tactile signals

GB/T 18569.1-2001 Safety of machinery reduces the health risks of hazardous substances emitted by machinery. Part 1. Used for

Principles and specifications of machinery manufacturers

GB/T 18569.2 Machinery safety reduces the health risks of hazardous substances emitted by machinery. Part 2. Generate verification procedures

Ordered methodology

GB/T 18717.1 Ergonomic design for machine safety Part 1. Principles for determining the size of the opening of the whole body into the machine

GB/T 18717.2 Ergonomic design for machine safety Part 2. Determination of the size of the opening of the human body part into the machine in principle […]