GB/T 30727-2014Determination of calorific value in solid biofuels (English PDF)
固体生物质燃料发热量测定方法
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30727-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 27, 2014
Implementation date
October 1, 2014
Scope
GB/T 30727-2014 is the English-translated version of 固体生物质燃料发热量测定方法.
GB/T 30727-2014 is the Chinese standard "Determination of calorific value in solid biofuels".
Its scope clause reads: Standard specifies the principle of measuring the high calorific value of solid biomass fuel with oxygen bomb calorimetry, test conditions, reagents and materials, instruments Equipment, precision of the method and the calculation method of the calorific value measurement step, the measurement results of the calculation, the heat capacity, instrument calibration constants.
This standard applies to all kinds of solid biomass fuel. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 30727-2014
National Standard of the People's Republic of China
- ICS
- 75.160.10
- Classification
- D 21
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 thermal units
- 6 laboratory conditions
- 7 Reagents and materials
- 8 Equipment
- 9 Analysis Sample
- 10 Determination of Step
- 11 7 Calculation Results
- 13 Expression of results
- 15 12 Calculation of calorific
- 17 13 Test Report
- Appendix A (normative) linear regression and standard deviation
1 Scope
Standard specifies the principle of measuring the high calorific value of solid biomass fuel with oxygen bomb calorimetry, test conditions, reagents and materials, instruments
Equipment, precision of the method and the calculation method of the calorific value measurement step, the measurement results of the calculation, the heat capacity, instrument calibration constants.
This standard applies to all kinds of solid biomass fuel.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 21923 Test code for solid biomass fuels
GB/T 28730 solid biomass fuel sample preparation method
GB/T 28731 solid biomass fuel industry analysis
GB/T 28732 solid biomass fuels determination of total sulfur
GB/T 28733 Solid biofuels Determination of total moisture
GB/T 28734 solid biomass fuels Hydrocarbon measurement method
3 Terms and Definitions
GB/T 28734 and as defined in the following terms and definitions apply to this document.
3.1 Calorific
Solid biomass fuels in the sample unit mass filled with excess oxygen oxygen bomb combustion, post-combustion substance consisting of oxygen, nitrogen
Gas, carbon dioxide, nitric acid and sulfuric acid, liquid water and heat as solid ash released.
3.2 Constant volume high calorific
Solid biomass fuels in the sample unit mass filled with excess oxygen oxygen bomb combustion, post-combustion substance consisting of oxygen, nitrogen
Gas, carbon dioxide, sulfur dioxide, liquid and solid gray when the heat released.
Constant volume high calorific value that is subtracted from Calorific heat hot nitric acid and sulfuric acid obtained after the correction hot.
3.3 Constant volume calorific
Solid biomass fuel sample unit mass at constant volume conditions, excess oxygen in combustion, post-combustion substance consisting of oxygen,
Nitrogen, carbon dioxide, sulfur dioxide, gaseous water (assuming pressure 0.1MPa) and the heat released when gray solid.
That constant volume calorific value by the constant-volume high calorific value minus water (solid biomass fuel Central Plains and some water, and wherein the hydrogen generated by combustion
Water) obtained after the heat of vaporization heat.
3.4 Constant calorific
Solid biomass fuels unit mass of the sample at constant pressure, the excess oxygen in the combustion, combustion material consisting of oxygen, […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 33652-2025Technical regulation of energy consumption test for cement manufacturing
- GB 29449-2024Norm of energy consumption per unit production of tyre and carbon black
- GB/T 17664-2024Charcoal
- GB/T 41713-2022Wood dust or scrap and wood pellets
- GB/T 40199-2021Technical requirements for resource recovery and further processing of urban garden waste
- NB/T 34005-2020Test method for clean heating stoves
Similar standards
How to Download GB/T 30727-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 30727-2014
$345.00