Valid

GB/T 3048.1-2007Test methods for electrical properties of electric cables and wires - Part 1: General (English PDF)

电线电缆电性能试验方法 第1部分:总则

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 3048.1-2007 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 3, 2007

Implementation date

May 1, 2008

Scope

GB/T 3048.1-2007 is the English-translated version of 电线电缆电性能试验方法 第1部分:总则.

GB/T 3048.1-2007 is the Chinese standard "Test methods for electrical properties of electric cables and wires -- Part 1: General".

Its scope clause reads: This Part of GB/T 3048 specifies terms and definitions for electrical properties of electric cables and wires, general provisions for tests, purpose to realize the provisions and periodic calibration of test equipment.

According to the relevant wire and cable standards, the test methods specified in the subsequent parts of GB/T 3048 are applicable to the electrical properties test for various types of electric cables and wires as well as materials.

Its clauses include terms and definitions; general provisions for tests; purpose to realize the provisions; calibration of test equipment. It was issued by the General Administration of Quality Supervision, Inspection and Quarantine on DECEMBER 03, 2007 and took effect on MAY 01, 2008.

Found what you need?

Document preview — GB/T 3048.1-2007

National Standard of the People's Republic of China

ICS
29.060
Classification
K 13
Replacing
GB/T 3048.1-1994

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword3
  • 1 Scope5
  • 2 Terms and definitions5
  • 3 General provisions for tests7
  • 4 Purpose to realize the provisions8
  • 5 Calibration of test equipment8

1 Scope

This Part of GB/T 3048 specifies terms and definitions for electrical properties of electric cables and wires, general provisions for tests, purpose to realize the provisions and periodic calibration of test equipment.

According to the relevant wire and cable standards, the test methods specified in the subsequent parts of GB/T 3048 are applicable to the electrical properties test for various types of electric cables and wires as well as materials.

2 Terms and definitions

For the purposes of this Part, the following terms and definitions apply to this Part of GB/T 3048.

2.1 Environmental conditions of specification

At the specified temperature and within the specified time, the specimen is placed in an environment with a specified relative humidity or immersed in water or other specified liquids.

2.2 Reference standard environment

The value measured under any environmental condition can be corrected to the value in a specific environment by calculation, and this specific environmental condition is called the reference standard environment. The standard reference atmospheric conditions are: Temperature: t0=20°C; Air pressure: b0=101.3kPa; Absolute humidity: h0=11g/m³.

2.3 Repeatability

Under the same measurement conditions, the consistency between the results obtained by successively measuring the same physical quantity for many times. results.

NOTE 4: Measurement results are generally understood here as corrected results.

NOTE 5: Under reproducibility conditions, reproducibility is given quantitatively as the experimental standard deviation SR of repeated observations (called the reproducibility standard deviation).

2.5 Calibration

Under specified conditions, it is a set of operations to determine the relationship between the value represented by the measuring instrument, the indication value of the measuring system, the physical measuring instrument or the reference material and the corresponding value determined by the reference standard.

NOTE 1: Calibration results can be used to evaluate the indication error of a measuring instrument, measuring system or physical measuring tool, or to assign values to marks on any scale.

NOTE 2: Calibration can also be used to determine other metrological characteristics.

NOTE 3: Calibration results can be recorded on a document sometimes called a "calibration certificate" or "calibration report."

NOTE 4: Correction values or "calibration factors" or "calibration curves" are sometimes used to characterize calibration results.

3 General provisions for tests

3.1 Unless otherwise specified in the relevant standards, the test shall be carried out at the ambient temperature (room temperature).

3.2 Unless otherwise specified in the product standard, during the type test, the specimen shall be subjected to environmental conditioning treatment for at least 16h.

The environmental conditions shall be in accordance with the relevant standards.

3.3 GB/T 3048 does not specify all test conditions and all test requirements. They shall be specified in the relevant cable product standards.

Any test requirements specified in GB/T 3048 can be modified in the relevant cable product standards, so as to suit the needs of special types of cables.

3.4 The test methods specified in GB/T 3048 are first used as type tests. Unless otherwise specified in the product standard, sampling tests and routine tests shall also be used. There are essential differences between the type test of some test items and the conditions of frequent tests (such as routine tests). GB/T 3048 has specified these differences. […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of GB/T 3048.1

EditionTitleRevisionStatus
GB/T 3048.1-2007Test methods for electrical properties of electric cables and wires - Part 1: Generalcurrent editionCurrent
GB/T 3048.1-1994Test methods for electrical properties of electric cables and wires - Part 1: Generalprevious editionSuperseded

This page sells the current edition, GB/T 3048.1-2007. Earlier editions are listed for reference only.

How to Download GB/T 3048.1-2007

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 3048.1-2007

$105.00