GB/T 28392-2012Road construction and road maintenance machinery and equipment - Hot-air recirculating-type asphalt pavement hot recycling and maintenance machine (English PDF)
道路施工与养护机械设备 热风式沥青混合料再生修补机
This is a limited preview
Buy now to download the full PDF (21 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28392-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 11, 2012
Implementation date
October 1, 2012
Scope
GB/T 28392-2012 is the English-translated version of 道路施工与养护机械设备 热风式沥青混合料再生修补机.
GB/T 28392-2012 is the Chinese standard "Road construction and road maintenance machinery and equipment - Hot-air recirculating-type asphalt pavement hot recycling and maintenance machine".
Its scope clause reads: This standard specifies the hot air repair asphalt recycling machine (hereinafter referred to as repair machine) terms and definitions, classifications, technical requirements, test Test methods, inspection rules, signs, instructions, packaging, transportation and storage.
This standard applies to retrofit in an automobile chassis based on two types of self-repairing machine.
Found what you need?
Document preview — GB/T 28392-2012
National Standard of the People's Republic of China
- ICS
- 91.220
- Classification
- P 97
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 6 Inspection Rules
- 7 signs, instructions, packaging, transportation and storage
- Appendix A (normative) fault type and fault risk index
- Annex B (informative) Hot-air asphalt recycling machine repair test records
1 Scope
This standard specifies the hot air repair asphalt recycling machine (hereinafter referred to as repair machine) terms and definitions, classifications, technical requirements, test
Test methods, inspection rules, signs, instructions, packaging, transportation and storage.
This standard applies to retrofit in an automobile chassis based on two types of self-repairing machine.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 1495 vehicle acceleration with the vehicle noise limits and measurement methods
GB 1589 road vehicles outside dimensions, axle load limits and quality
GB/T 3766 Hydraulic System General technical conditions
GB 3847 from compression-ignition engines and compression-ignition engine vehicle exhaust smoke emission limits and measurement methods
Flag GB 4094 automotive controls, indicators and telltales
GB 4785 Installation regulations for car and trailer exterior illumination and light signaling devices
GB 5226.1 mechanical and electrical safety of machinery - Electrical equipment - Part 1. General requirements
GB 7258 Safety requirements for operation of motor vehicles
GB/T 7932 General technical conditions of pneumatic systems
GB/T 7935 General technical conditions for hydraulic components
GB/T 9969 General Instructions industrial products
GB 11567.1 car and trailer side protection requirements
GB 11567.2 car and trailer rear underrun protection requirements
GB/T 12673 Automotive main dimensions measuring method
GB/T 12674 Automotive Quality (by weight) parameter measurement method
GB 12676 automotive braking systems structure, performance and test methods
GB/T 14039 Hydraulic fluid level of contamination by solid particles
GB 16710.1 Construction Machinery noise limits
GB/T 16710.2 Determination of machinery - Stationary test conditions of exterior noise of
GB/T 17299 moving machinery - Minimum inlet size
GB/T 17300 moving machinery passage means
GB 17691 from compression ignition and gas fueled positive ignition engines with exhaust emission limits and measurement methods (China III,
IV, V stage)
GB 18296 car fuel tank safety requirements and test methods
GB/T 18411 Road vehicles product label
GB/T 20082 Hydraulic fluid contamination using optical microscopy method for the determination of particulate contamination
GB 20178 Earth-moving machinery - Safety signs and hazard pictorials General […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 1495Limits and measurement methods for noise emitted by accelerating motor vehicles
- GB 1589Limits of dimensions, axle load and masses for motor vehicles, trailers and combination vehicles
- GB/T 3766Hydraulic fluid power -- General rules and safety requirements for systems and their components
- GB 3847Limits and measurement methods for emissions from diesel vehicles under free acceleration and lugdown cycle
- GB 4785Prescription for installation of the external lighting and light-signalling devices for motor vehicles and their trailers
- GB 7258Technical specifications for safety of power-driven vehicles operating on roads
GB 5226.1 · GB 11567.1 · GB 11567.2 · GB 16710.1 · GB/T 16710.2 · GB 20178
Similar standards
How to Download GB/T 28392-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 12676-2014 — Road vehicle -- Braking systems -- Structure, performance and test methods
GB 1495-2002 — Limits and measurement methods for noise emitted by accelerating motor vehicles
GB 1589-2016 — Limits of dimensions, axle load and masses for motor vehicles,trailers and combination vehicles
Secure payment via Stripe
Payments accepted
GB/T 28392-2012
$375.00