GB/T 24689.2-2017Equipment for crop protection—Insect-killing light trap (English PDF)

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard replaces GB/T 24689.2-2009 "plant protection machinery frequency vibration type insect light", and GB/T 24689.2-2009 phase Than, except for editorial changes outside the main technical changes are as follows.

--- Modify the scope of the standard (see Chapter 1, see the 2009 edition of Chapter 1);

--- Modify some terms and definitions (see Chapter 3, see the 2009 edition of Chapter 3);

--- Remove the basic structure (see the 2009 edition of Chapter 4);

--- Increased protection, mechanical strength, electrical strength, leakage current, clearances and creepage distances and other safety requirements and test methods (See 4.1, 4.2, 4.6, 4.7, 4.8);

--- Increasing the safety, technical requirements and test methods of pneumatic pest control lamps (see Chapter 4, Chapter 5 and Chapter 6);

--- Modify the appearance requirements, assembly quality, mark (see 5.3, see the 2009 edition 6.1.3,5.4,8.2,9.1);

--- Increasing the functional indicators of insecticidal lamps and test methods (see 5.7 and Chapter 6);

--- Remove the ballast, starter and other requirements (see.2009 version 6.2.4);

--- Removed the rated power, trap light source calibration power, insect capture rate and the effective radius of a single lamp technical requirements (see.2009 Editions 6.2.6, 6.2.7, 6.2.9 and 6.2.10);

--- Modify the requirements for trapping light source wavelengths and high-voltage power grids (see 5.8, see 6.2.8, 5.9, 6.2.11 of the 2009 edition);

--- Modify the rain control function and light control function requirements and test methods (see 5.7, see the 2009 edition of 5.1, 6.2.2);

--- Modify the insulation column (body) carbonation test method (see 6.3.16, see the 2009 edition of 7.4.5).

1 Scope

This standard specifies the safety requirements for plant protection insecticidal lamps, technical requirements, test methods, inspection rules and instructions, signs, Packaging, transportation and storage.

This standard applies to electric shock and wind insecticidal lamps, other ways of insecticidal lamp can be used as a reference.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this document.

For undated references, the latest edition (including all amendments) applies to this document.

GB/T 191 Packaging - Pictorial signs

GB/T 4208-2017 enclosure rating (IP code)

GB 4706.1-2005 Household and similar electrical appliances - Safety - Part 1: General requirements

GB/T 9480 agriculture and forestry tractors and machinery, lawn and garden power machinery manual preparation rules

GB 10396 Tractors and machinery for agriculture and forestry, lawn and garden machinery safety signs and dangerous graphics General

GB/T 23821 Safety of machinery to prevent upper and lower limbs reach the safe distance of the danger zone

3 Terms and definitions

GB 4706.1-2005 defined and the following terms and definitions apply to this document.