GB/T 22517.6-2020Technical requirements and test methods for sports field—Part 6: Track and field (English PDF)

Foreword

GB/T 22517 "Requirements and Inspection Methods for the Use of Sports Grounds" consists of the following parts.

---Part 2: Swimming venue;

---Part 3: Baseball and softball fields;

---Part 4: Synthetic surface basketball court;

---Part 6: Track and Field Field;

---Part 7: Tennis court;

---Part 10: Squash court venue;

---Part 11: Hockey Field;

This part is Part 6 of GB/T 22517.

This section was drafted in accordance with the rules given in GB/T 1.1-2009.

This part replaces GB/T 22517.6-2011 "Requirements and Inspection Methods for the Use of Sports Grounds Part 6: Track and Field Fields", and Compared with GB/T 22517.6-2011, the main technical changes except for editorial changes are as follows.

---Modified the classification of outdoor synthetic surface track and field venues (see Table 1, Table 1 of the 2011 edition);

--- Modify the total thickness of the synthetic surface layer [see 5.1.2.1a), 5.1.2a) of the 2011 edition];

---The absolute thickness requirement of the synthetic surface layer has been increased [see 5.1.2.1a)];

---Modified the thickness of the surface layer near the barrier pool [see 5.1.2.1c), 5.1.2c) of the 2011 edition];

---Modified the placement of standard competition facilities and the thickened surface area (see Figure 1, Figure 1 in the 2011 edition);

---Modified the surface flatness requirements of Class II and III sites (see 5.1.3, 5.1.3 of the 2011 edition);

---Modified the limit value of inorganic filler in the surface material (see 5.2.2, 5.2.3 of the 2011 edition);

---Modified the limit of harmful substances in surface materials (see 5.2.3, 5.2.2 of the 2011 edition);

---Added the requirements for the impact absorption performance and vertical deformation performance of the underlying materials at different temperatures in Class I venues (see 5.2.4.2);

---Modified the durability performance requirements of surface materials (see 5.2.5, 5.2.5 of the 2011 edition);

---Modified the specifications and requirements of 400m circular runway facilities for I and II sites (see 5.4.1.2, 5.4.1.2 of the 2011 edition);

--- Modify the surface flatness detection point requirements (see 6.1.3.2, 6.1.3.2 of the 2011 edition);

---Added the general requirements for surface materials (see 6.2.1);

---Added the requirements for site test selection (see 6.2.2);

---Modified the preparation requirements of the laboratory test surface material samples (see 6.2.3, 6.2.1 of the 2011 edition);

---Deleted the test method for the limit value of hazardous substances in the surface material (see 6.2.2 of the 2011 edition);

---Modified the requirements for the determination method of inorganic filler content (see 6.2.4, 6.2.3 of the 2011 edition);

---Modified the test method requirements for the thickness of samples [see 6.2.5.1, 6.2.4a) of the 2011 edition];

---Modified the method for measuring the durability of surface materials (see 6.2.6, 6.2.5 of the 2011 edition);

---Increase the 800m lane grabbing mark line on the 400m standard runway, the lane grabbing cut-in difference (see Table A.2);

---Modified the tolerance requirements of the barrier pool (see A.2.3, A.2.3 in the 2011 edition);

---Modified the requirements of the approach area for high jump facilities [see A.3.1.1a) and Figure A.7, 2011 version of A.3.1.1 and Figure A.6];

---Modified the requirements of the long jump and triple jump landing area (see A.3.1.3c), Figure A.10 and Figure A.11, 2011 edition of A.3.1. 3c), Figure A.9a) and Figure A.9c)];

--- Deleted Appendix C (see Appendix C of the 2011 edition).

Introduction

Synthetic surface layer is currently the most widely used ground layer paving material for track and field fields. It is a large-scale comprehensive field designated by the International Federation of Athletics Associations.

Track and field competitions are all set up on synthetic surface track and field venues. my country's synthetic surface track and field venues are made of polyurethane materials or rubber and plastic materials.

The production and construction paving technology is basically mature, the cost is reasonable, and the application is popular. The standards of this part are formulated to stipulate the outdoor synthetic surface course Use requirements, inspection methods and eligibility determination rules will help ensure that sports facilities can optimize the allocation of social resources under the premise of meeting the use requirements.

It provides a basis for the design, construction and certification of track and field venues.

This part of the standard conforms to the track and field competitions organized or approved by the International Federation of Athletics Associations and the counties (cities) organized or approved by the Chinese Athletic Association And requirements for track and field sports venues used in track and field competitions above the county (city) level.

1 Scope

This part of GB/T 22517 specifies the site classification, requirements, inspection methods and qualification rules for outdoor synthetic surface track and field venues.

This part is applicable to outdoor composite surfaces for competition, training and public fitness for water-permeable and non-permeable on-site pouring paving and precast paving Tier track and field field. Indoor track and field venues (excluding specification marking) can refer to this section for implementation.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document.

For undated references, the latest version (including all amendments) applies to this document.

GB/T 4498.1-2013 Determination of rubber ash content Part 1: Muffle furnace method (ISO 247:2006, MOD)

GB/T 10654 Determination of tensile strength and elongation at break for high polymer porous elastic materials (GB/T 10654-2001, ISO 1798:1997, IDT)

GB/T 14833 synthetic material runway surface

GB/T 16422.2-2014 Plastic laboratory light source exposure test method Part 2: Xenon arc lamp (ISO 4892-2:2006, IDT)

QB/T 2443 Steel tape measure

Track and Field Competition Rules (2018-2019) Chinese Athletic Association

EN1969:2000 Determination of ground thickness in artificial sports areas

IAAF Track and Field Facilities Manual

3 Terms and definitions

The following terms and definitions apply to this document.