GB/T 19064-2025Technical requirements and test methods for residential solar photovoltaic power systems (English PDF)
家用太阳能光伏电源系统技术条件和试验方法
This is a limited preview
Buy now to download the full PDF (23 pages)
Need quotation for your management?
Get a formal quotation for GB/T 19064-2025 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2025
Implementation date
July 1, 2026
Scope
GB/T 19064-2025 is the English-translated version of 家用太阳能光伏电源系统技术条件和试验方法.
GB/T 19064-2025 is the Chinese standard "Technical requirements and test methods for residential solar photovoltaic power system".
Its scope clause reads: This document defines the terminology for off-grid residential solar photovoltaic power systems and their components, and specifies the classification and naming, technical requirements, and documentation.
The document outlines the requirements for parts, markings, and packaging, and describes the corresponding test methods. This document applies to residential solar photovoltaic power systems and components, as well as other related components including solar charge/discharge controllers and DC/AC inverters.
Reference for inverter functional devices and systems, such as off-grid solar photovoltaic power systems and components for solar street lights, emergency lighting equipment, etc.
Found what you need?
Document preview — GB/T 19064-2025
National Standard of the People's Republic of China
- ICS
- 27.160
- Classification
- K 83
- Replacing
- GB/T 19064-2003
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 System Classification and Configuration
- 4.1 System Classification
- 4.2 System Configuration
- 5 Technical Requirements
- 5.1 System Performance
- 5.2 Photovoltaic Modules
- 5.3 Storage Battery
- 5.4 Charge/Discharge Controller
- 5.5 Inverter
- 5.6 Load
- 6 Test Methods
- 6.1 Testing Equipment
- 6.2 System Performance Test
- 6.3 Photovoltaic module test
- 6.4 Charge/Discharge Controller Test
- 6.5 Inverter Test
- 7 Document Requirements
- 7.1 System Files
- 7.2 Component Document
- 8 Marking, packaging, transportation, and storage
- 8.1 Mark
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents". Drafting.
This document supersedes GB/T 19064-2003 "Technical Conditions and Test Methods for Household Solar Photovoltaic Power Systems". Compared to GB/T 19064-2003, aside from structural adjustments and editorial changes, the main technical changes are as follows.
---The terms "solar cell module," "DC self-ballasted luminaire," and "DC semi-luminaire" and their definitions have been removed (see Chapter 3 of the 2003 edition);
---The system classification has been changed (see Chapter 4, Chapter 4 of the 2003 edition);
---The relevant content for "battery enclosure", "wind turbine generator set", and "DC lighting" has been deleted, and the content for "battery" and "charge and discharge control" has been changed. For information on "devices," "wires," and "load connections or output sockets," see Chapter 4 (Chapter 5 in the 2003 edition).
---The content related to "DC lighting" and "controller for wind turbine generators" has been deleted, and the content related to "photovoltaic modules," "batteries," and "charging control" has been changed. Technical requirements related to "controllers" and "DC/AC inverters" (see Chapter 5, Chapter 6 of the 2003 edition);
---Added technical requirements related to "system performance" and "load" (see 5.1 and 5.6);
---The content related to "DC lighting test" has been deleted, and the content related to "photovoltaic module test", "charge and discharge controller test", and "inverter test" has been changed. The relevant test methods for "System Performance Testing" have been added (see Chapter 6, Chapter 8 of the 2003 edition). Content (see 6.2);
---The "Inspection Rules" section has been removed (see Chapter 9 of the 2003 edition);
---The sections "Special marking requirements for DC lighting fixtures" and "Inspect their conformity according to the following clauses" have been deleted (see 10.1.2 and 10.1.3 of the 2003 edition).
1 Scope
This document defines the terminology for off-grid residential solar photovoltaic power systems and their components, and specifies the classification and naming, technical requirements, and documentation.
The document outlines the requirements for parts, markings, and packaging, and describes the corresponding test methods.
This document applies to residential solar photovoltaic power systems and components, as well as other related components including solar charge/discharge controllers and DC/AC inverters.
Reference for inverter functional devices and systems, such as off-grid solar photovoltaic power systems and components for solar street lights, emergency lighting equipment, etc.
2 Normative references
The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.
For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies to this document.
GB/T 191 Packaging and Storage Graphic Symbols
GB/T 2297 Terminology for Solar Photovoltaic Energy Systems
GB/T 2423.1 Environmental testing of electrical and electronic products - Part 2: Test methods - Test A. Low temperature
GB/T 2423.2 Environmental testing of electrical and electronic products - Part 2: Test methods - Test B. High temperature
GB/T 2423.3 Environmental testing - Part 2: Test methods - Test Cab. Constant damp heat test
GB/T 2423.10 Environmental testing - Part 2: Test methods - Test Fc. Vibration (sine wave)
GB/T 2423.18 Environmental testing - Part 2: Test methods - Test Kb. Salt spray, alternating (sodium chloride solution)
GB/T 3859.2 General requirements for semiconductor converters and grid-commutated converters - Part 1-2.Application guidelines
GB/T 4208 Degrees of protection provided by enclosures (IP code)
GB/T 6495.1 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
GB (/T) 7000 (All Parts) Luminaires
GB/T 7260.1 Uninterruptible power supply systems (UPS) - Part 1: Safety requirements
GB/T 9535.101 Design qualification and type approval of terrestrial photovoltaic modules - Part 1-1.Special requirements for testing of crystalline silicon photovoltaic modules
GB/T 16422.1 Plastics - Laboratory Light Source Exposure Test Methods - Part 1: General Guidelines
GB/T 16422.2 Plastics - Laboratory Light Source Exposure Test Methods - Part 2: Xenon Arc Lamps
GB/T 20047 Safety Assessment of Photovoltaic Modules
GB/T 20840.2 Instrument Transformers - Part 2: Supplementary Technical Requirements for Current Transformers
GB/T 20840.3 Instrument Transformers - Part 3: Supplementary Technical Requirements for Electromagnetic Voltage Transformers
GB/T 22473.1 Storage Batteries - Part 1: Technical Conditions for Off-Grid Photovoltaic Applications
GB/T 29196 Technical Specification for Standalone Photovoltaic Systems
GB 31241 Safety Technical Specification for Lithium-ion Batteries and Battery Packs for Portable Electronic Products
GB/T 32504 Safety Technical Specification for Civil Lead-acid Batteries
GB 40165 Safety Technical Specification for Lithium-ion Batteries and Battery Packs for Stationary Electronic Equipment
IEC 62109-1:2010 Safety of power conversion equipment for photovoltaic power generation systems - Part 1: General requirements
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 23 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 2297Terminology of solar photovoltaic energy system
- GB/T 2423.1Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
- GB/T 2423.2Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
- GB/T 2423.3Environmental testing - Part 2: Testing method - Test Cab: Damp heat, steady state
- GB/T 2423.10Environmental testing - Part 2: Test methods - Test Fc: Vibration (sinusoidal)
GB/T 20047 · GB/T 20840.2 · GB/T 20840.3 · IEC 62109-1:2010
Cited by
- GB/T 24460-2025Generic technical specification of solar photovoltaic (PV) lighting device
- GB/T 46524-2025Photovoltaic-prioritized electrical storage water heaters
- GB/T 33766-2017Technical requirements for independent energy of solar photovoltaic system
- NB/T 34001-2011General Specifications of Solar Lights for Killing Pest Insects
- NB/T 34002-2011Wind-solar hybrid outdoor lighting device for rural areas
Editions of GB/T 19064
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 19064-2025 | Technical requirements and test methods for residential solar photovoltaic power systems | current edition | Current |
| GB/T 19064-2003 | Technical requirements and test methods for residential solar photovoltaic power systems | previous edition | Superseded |
This page sells the current edition, GB/T 19064-2025. Earlier editions are listed for reference only.
How to Download GB/T 19064-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 31241-2022 — Lithium ion cells and batteries used in portable electronic equipment - Safety technical specification
GB 31241.4-2026 — Safety of lithium-ion cells and batteries used in electronic and electrical equipment - Part 4: Toys
GB 40165-2021 — Lithium ion cells and batteries used in stationary electronic equipments - Safety technical specification
Secure payment via Stripe
Payments accepted
GB/T 19064-2025
$360.00