GB/T 18263-2023Wood-based panel machinery—Hot press for terminology (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting.

This document replaces GB/T 18263-2000 "Terms of Wood-based Panel Mechanical Hot Press". Compared with GB/T 18263-2000, except for structural adjustment In addition to rectification and editorial changes, the main technical changes are as follows:

a) Deleted the sketch (see 2.1 of the 2000 edition);

b) Deleted load (see 1.18 in Table 1 of the 2000 edition), maximum working pressure (see 1.19 in Table 1 of the 2000 edition), mass (weight) (see 1.27 in Table 1 of the 2000 edition), overall dimensions (see 1.28 in Table 1 of the 2000 edition), sliders and guide rails (see 2.12 in Table 1 of the 2000 edition), cylinder block (see 3.1.1 in Table 1 of the 2000 edition), plunger (piston) (see Table 1 of the 2000 edition 3.1.2 in 2000 edition), dust seal (see 3.1.3 in Table 1 of 2000 edition), oil seal ring (see 3.1.4 in Table 1 of 2000 edition), column Plug/piston guide sleeve (see 3.1.5 in Table 1 of the 2000 edition), sealing gland (see 3.1.6 in Table 1 of the 2000 edition), oil pipe connection head (see 3.1.7 in Table 1 of the 2000 edition), rapid pressure cylinder plunger (see 3.3.1 in Table 1 of the 2000 edition), air pressure bag (see 4.2.5 in Table 1 of the 2000 edition), plates (see 4.2.7 in Table 1 of the 2000 edition), pump stations (see 4.2.7 in Table 1 of the 2000 edition 6.1), pumps (see 6.2 in Table 1 of the 2000 edition), accumulators (see 6.3 in Table 1 of the 2000 edition), pressure gauges (see 6.2 in the 2000 edition 7.1 in Table 1 of the 2000 edition), thermometers (see 7.2 in Table 1 of the 2000 edition), timers (see 7.3 in Table 1 of the 2000 edition), indicators indicator lights (see 7.4 in Table 1 of the 2000 edition), control buttons (see 7.5 in Table 1 of the 2000 edition), manual operating levers (see 7.6 in Table 1 of the 2000 edition), control switch (see 7.7 in Table 1 of the 2000 edition), console (see 7.8 in Table 1 of the 2000 edition), safety Full face mask (see 8.3 in Table 1 of the 2000 edition), others (see 9 in Table 1 of the 2000 edition), pressure indicator (see the table of the 2000 edition 9.1 in 1), heat sources (see 9.2.2 in Table 1 of the 2000 edition), work examples (see 11 in Table 1 of the 2000 edition), etc. the term;

c) Delete the term of pre-pressing machine (see 1.7 in Table 1 of the 2000 edition);

d) The number of hot pressing plates (see 1.14 in Table 1 of the 2000 edition), the unit pressure of the hot pressing plates (see 1.20 in Table 1 of the 2000 edition) and Pressed plate unit pressure (see 1.21 in Table 1 of the 2000 edition), continuous pressure holding section (see 4.2 in Table 1 of the 2000 edition), hot pressing (see 11.1 in Table 1 of the 2000 edition), various glue-pressed veneers (see 11.2 in Table 1 of the 2000 edition), veneer veneer (see Technical terms such as 11.3) in Table 1 of the 2000 edition;

e) Deleted the number of charging compartments (see 1.10 in Table 1 of the 2000 edition), the frame plate (see 2.1 in Table 1 of the 2000 edition), and the upper backing plate (See 2.2 in Table 1 of the 2000 edition), heat balance plate (see 2.3 in Table 1 of the 2000 edition), upper top plate (see Table 1 of the 2000 edition 2.4 in), heat shield (see 2.5 in Table 1 in 2000 edition), cooling plate (see 2.6 in Table 1 in 2000 edition), main pressure cylinder (see 3.2 in Table 1 of the 2000 edition), main pressure cylinder plunger (see 3.2.1 in Table 1 of the 2000 edition), rapid pressure cylinder (see 3.3 in Table 1 of the 2000 edition), rapid pressure cylinder plunger (see 3.3.1 in Table 1 of the 2000 edition), lower bracket (see 2000 edition 4.2.1) in Table 1 and other main component terms;

f) Added periodic heat press (see 3.2), vertical heat press (see 3.4), horizontal heat press (see 3.5), continuous flat heat press (see 3.8), continuous rolling heat press (see 3.9), continuous extrusion heat press (see 3.10), veneer heat press (see 3.14), veneer Periodic hot press (see 3.15), veneer continuous flat press (see 3.16), vacuum air cushion film coating hot press (see 3.17) Terms and definitions of isothermal press machine;

g) Increased column (see 3.21), fixed beam (see 3.26), hot plate positioning and guiding mechanism (see 3.27), lubrication system (see 3.32), hot oil pipe (see 3.33), anti-wear lining (see 3.39), steel belt driving roller (see 3.40), steel belt driven roller (see 3.41), steel belt Idler roller (see 3.42), roller bar (see 3.44), connecting pin (see 3.45), roller blanket transmission chain (see 3.46), chain guide rail (see 3.47), upper and lower Steel belt driving mechanism (see 3.48), upper and lower steel belt deviation adjustment mechanism (see 3.49), upper and lower roller blanket driving mechanism (see 3.50), entrance quilt Moving frame (see 3.51), exit driving frame (see 3.52), steel belt tension roller (see 3.53), main heating roller (see 3.54), large pressure roller (see 3.55), small pressure roller (see 3.56), steel belt deflection adjustment roller (see 3.57), sprocket roller (see 3.58), density roller (see 3.59), steel belt detection Device (see 3.60), roller blanket detection device (see 3.61), upper beam (see 3.62), bottom beam (see 3.63), thickness gauge (see 3.64), air cushion Membrane (see 3.65), lifting screw (see 3.67), position detection device (see 3.68), parallel synchronization mechanism (see 3.69), upper oil tank (see 3.70), guide mechanism (see 3.71), liner tensioning device (see 3.72), heat insulation pad (see 3.73), lower fuel tank (see 3.74), Terms of main parts such as liner (see 3.75), tension block (see 3.76), buffer pad (see 3.77), buffer pad clamp (see 3.78) and definitions;

h) Added pressurized cylinder diameter (3.85), pressurized cylinder stroke (see 3.86), pressure division (see 3.87), heating division (see 3.88), Heating medium (hot oil/steam/hot water) (see 3.93), thermal pressure factor (see 3.94), pressure curve (see 3.95), displacement curve (see 3.96) and other technical terms and definitions;

i) Changed the continuous heat press (see 3.3, 1.6 in Table 1 of the 2000 edition), column heat press (see 3.12, Table 1 of the 2000 edition 1.2 in the 2000 edition), lock nuts (see 3.24, 2.10 in Table 1 of the 2000 edition), movable beams (see 3.25, 2.10 in Table 1 of the 2000 edition 5), safety devices (see 3.29, 8 in Table 1 of the 2000 edition), thermal oil circulation system (see 3.31, 8 in Table 1 of the 2000 edition 9.2.1), steel belt (see 3.38, 3.6 in Table 1 of the 2000 edition), roller blanket (see 3.43, 4.3 in Table 1 of the 2000 edition), workpiece support Clamping and guiding mechanism (see 3.66, 4 in Table 1 of the 2000 edition) and other terms and definitions.

1 Scope

This document defines the terminology of the whole machine, main components and typical hot-pressing process of the hot-pressing machine for wood-based panel production.

This document applies to the design, manufacture, trade, teaching, scientific research and press publication of wood-based panel heat presses.

2 Normative references

This document has no normative references.

3 Terms and Definitions