GB/T 14477-2008Printing specifications for charts (English PDF)
海图印刷规范
This is a limited preview
Buy now to download the full PDF (18 pages)
Need quotation for your management?
Get a formal quotation for GB/T 14477-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 20, 2008
Implementation date
December 1, 2008
Scope
GB/T 14477-2008 is the English-translated version of 海图印刷规范.
GB/T 14477-2008 is the Chinese national specification for the printing of charts, covering the whole production line from prepress to the finished sheet.
It sets out the chart prepress production process, PS plate copying, computer-to-plate output, proofing, review, printing and the inspection of the printed product, with the quality requirements and the working procedure for each stage.
It fixes the colour requirements for chart printing, the basic quality requirements of the printed sheet and how inspection is organised inside the printing works, and adds normative annexes on the printing colour charts and on paper cutting sizes and an informative annex on film dot density ratios.
It applies to ordinary charts, nautical charts, sea charts and to dedicated atlases, navigation tables and similar books. It replaces GB/T 14477-1993, was issued on 20 June 2008 and has applied since 1 December 2008.
Found what you need?
Document preview — GB/T 14477-2008
National Standard of the People's Republic of China
- ICS
- 01.080.30
- Classification
- A 79
- Replacing
- GB/T 14477-1993
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 General
- 5 Chart prepress production process
- 6 PS edition copy
- 7 computer to plate
- 8 proofing
- 9 Review
- 10 Printing
- 11 printing product inspection
- Appendix A (normative) Printing color charts
- Annex B (informative) film with a dot density ratio of outlets solver
- Annex C (normative) paper cutting size
Foreword
This standard replaces GB/T 14477-1993 "charts printed specification." This standard and GB/T 14477-1993 compared to the main changes are as follows.
--- According to the provisions of GB/T 1.1-2000 for formatting, hierarchical division has been adjusted;
--- The scope of the standard has been modified;
--- Normative references removed "GB 5698 color terms", "GB 788 books and magazine format and format size" "GB 12317 Chart schema", "GB 12318 nautical charts", "GB 12319 Chinese charts schema";
--- Added "Terms and definitions" (see Chapter 3);
--- In the "General" removed "charts printed approval authority" (1993, version 3.1);
--- The "chart printing process designed" to "chart prepress production process" (1993 edition, Chapter 4; Chapter 5 edition);
--- Remove the "Chart of reply" (1993 edition Chapter 5), which will be "laser typesetting technology point of order" (1993 version 5.6) of The content, to "chart prepress production process" (see 5.2.3);
--- Delete the entire contents of "pirated" (Chapter 6 of the 1993 edition);
--- Delete the entire contents of the "Revised Edition" (Chapter 7, 1993 edition);
--- The "copy" to "PS edition copy" (1993 edition, Chapter 8; Chapter 6 of this edition), which is only retained about PS version Copy the contents;
--- Increase the "computer to plate" (see Chapter 7);
--- Remove the "print" in the "four-color offset press Practice" (1993 edition 11.6);
--- Delete the entire contents of the "blueprint" (Chapter 13 of the 1993 edition);
--- Delete the entire contents of "Information Management Regulations" (Chapter 14, 1993 edition);
--- To "Appendix A printed color chart" Content made modifications and variations;
--- The "Appendix B chart printing process scheme" to "Appendix B solver proportion with dot dot density film," deleted "attached Appendix B chart printing process program "Entire contents (1993 edition) B1 ~ B7 of;
--- Delete the entire contents of "Appendix D registration of lists Shape Data Management" (1993 edition).
The Standard Appendix A, Appendix C is a normative appendix, Appendix B is an informative annex. The standard proposed by the Navy Command. This standard by the Navy Command Maritime Assurance.
1 Scope
This standard specifies the chart printing prepress, platemaking, proofing, printing, product testing and other production processes, quality standards and operational Procedures.
This standard applies to ordinary chart, print charts, sea charts and dedicated portfolio, navigation table books and the like.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 9851.1 ~ 9851.9-1990 printing technology terms
GB 12320-1998 Chinese nautical charts
3 Terms and Definitions
GB/T 9851-1990 and identified the following terms and definitions apply to this standard.
3.1 Digital proofing
Digital publishing and printing systems-based, publishing and printing in accordance with production standards and specifications page graphic information processing, direct output color comp image Proofing technology.
3.2 Standard proof
In the digital environment mapping, chart data after digital proofing output, confirm that the chart can be used as a standard pattern printed proofs.
3.3 Computer to plate
After the computer digital page graphic information directly output to the process on printing plates.
4 General
4.1 Chart color printing and color requirements
4.1.1 Chart color printing press GB 12320-1998 execution.
4.1.2 Chart color printing according to the provisions of Appendix A.
4.1.3 Chart color patches labeled according to the corresponding provisions of the drawings.
4.2 Basic requirements for quality of printed diagram
4.2.1 It must be clearly printed diagram, ink full uniform, complete annotation, drawing clean, Fit accuracy compliance.
Figure 4.2.2 within each element must be consistent with the printed sample graph found by printing errors and omissions comp image mapping unit modifications, alterations larger, You should separate plate.
4.3 Basic requirements for quality inspection
4.3.1 Chart printing quality checks to ensure that an important part of FIG quality, must carry out the printing production process. Each manufacturer shall establish printed map Specialized inspection agencies or full-time inspectors.
4.3.2 Quality Inspection to establish a self-test, the next step to check on a process and a system which combines a full-time inspection to clear division of labor, each negative
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
Editions of GB/T 14477
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 14477-2008 | Printing specifications for charts | current edition | Current |
| GB/T 14477-1993 | Printing specifications for charts | previous edition | Superseded |
This page sells the current edition, GB/T 14477-2008. Earlier editions are listed for reference only.
How to Download GB/T 14477-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 9851.1-2008 — Terminology of graphic technology - Part 1: Fundamental terms
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 14477-2008
$295.00