GB/T 11337-2004Measurement of departures from flatness (English PDF)
平面度误差检测
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 11337-2004 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China
Level / Type
National · Recommended
Issue date
November 11, 2004
Implementation date
July 1, 2005
Scope
GB/T 11337-2004 is the English-translated version of 平面度误差检测.
GB/T 11337-2004 is the Chinese national standard on measurement of departures from flatness, in the field of metrology and measurement.
The /T suffix marks it as a recommended standard: it is not compulsory by itself, but it becomes binding as soon as a contract, a tender or a customer specification calls it up — which in practice is how most foreign buyers meet it.
It was issued on 11 November 2004 by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China, and has been in force since 1 July 2005.
Classification: ICS 17.040.10, CCS J04. This page is published from the official record of the standard held by the Chinese standards administration: the identification, the dates, the classification and the issuing body are taken from there.
The clause text, the tables and the numeric limits are in the document itself, which is delivered complete in English translation.
Found what you need?
Document preview — GB/T 11337-2004
National Standard of the People's Republic of China
- ICS
- 17.040.10
- Classification
- J04
Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Assessment methods
- 5 Measurement methods
- 6 Data processing
- 7 Arbitration
3 Terms and definitions
4 Assessment methods
5 Measurement methods
6 Data processing
7 Arbitration
Foreword
This document was issued on 11 November 2004 by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China and the Standardization Administration of China, and has been in force since 1 July 2005.
It replaces GB/T 11337-1989.
Classification: ICS 17.040.10, CCS J04.
About this edition
GB/T 11337-2004 is the current edition. It was issued on 11 November 2004 and has been in force since 1 July 2005, replacing GB/T 11337-1989.
GB/T 11337-1989 has been superseded: a specification that still cites it is citing a withdrawn edition.
The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one from the record of the Standardization Administration.
Classification and status
GB/T 11337-2004 is classified under ICS 17.040.10, in the field of metrology and measurement. ICS is the International Classification for Standards, the same scheme used by ISO and by the national bodies of most countries, which is what allows a Chinese standard to be placed beside its foreign counterparts on subject rather than on number.
Its Chinese Standard Classification code is CCS J04. CCS is the domestic scheme, a letter for the sector and two digits for the subject within it, and it is the code by which the standard is filed and searched in China.
The GB/T prefix marks a recommended national standard. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it. In practice that covers most of the cases in which it will be read — a purchase specification, an inspection agreement or a certification scheme.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 47010-2026Cerium doped gadolinium gallium aluminium garnet polycrystalline scintillator arrays
- GB/T 47397-2026Vibration forming platforms for precast concrete components
- GB 15093-2025National emblem
- LY/T 1104-2025Shavings dryer
- GB/T 5856-2024Wood based panel machinery - General specifications of the hot press
- YY 0117.1-2024Implants for surgery - Forgings and castings for bone joint prostheses - Part 1: Ti6Al4V titanium alloy forgings
Similar standards
Editions of GB/T 11337
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 11337-2004 | Measurement of departures from flatness | current edition | Current |
| GB/T 11337-1989 | Measurement of departures from flatness | previous edition | Superseded |
This page sells the current edition, GB/T 11337-2004. Earlier editions are listed for reference only.
How to Download GB/T 11337-2004
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 11337-2004
$315.00