Valid

GB/T 11334-2005Geometrical Product Specifications(GPS)Cone tolerance (English PDF)

产品几何量技术规范(GPS) 圆锥公差

Preview PDF

This is a limited preview

Buy now to download the full PDF (8 pages)

Need quotation for your management?

Get a formal quotation for GB/T 11334-2005 in 30 minutes.

Issued by

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China

Level / Type

National · Recommended

Issue date

May 16, 2005

Implementation date

December 1, 2005

Scope

GB/T 11334-2005 is the English-translated version of 产品几何量技术规范(GPS) 圆锥公差.

GB/T 11334-2005 is the Chinese national standard on geometrical product specifications(gps)cone tolerance, in the field of metrology and measurement.

The /T suffix marks it as a recommended standard: it is not compulsory by itself, but it becomes binding as soon as a contract, a tender or a customer specification calls it up — which in practice is how most foreign buyers meet it.

It was issued on 16 May 2005 by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China, and has been in force since 1 December 2005.

Classification: ICS 17.040.10, CCS J04. This page is published from the official record of the standard held by the Chinese standards administration: the identification, the dates, the classification and the issuing body are taken from there.

The clause text, the tables and the numeric limits are in the document itself, which is delivered complete in English translation.

Found what you need?

Document preview — GB/T 11334-2005

National Standard of the People's Republic of China

ICS: 17.040.10
Classification: J04

Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Items of the cone tolerances and methods of specifying them
5 Values of the cone tolerances
Annex A (informative) Maximum cone angle error that can be limited by the cone diameter tolerance
Annex B (informative) Indication of cone tolerances when they are given according to 4.2 a) of this standard
Annex C (informative) Position in the GPS matrix model

3 Terms and definitions

4 Items of the cone tolerances and methods of specifying them

5 Values of the cone tolerances

Foreword

This document was issued on 16 May 2005 by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China and the Standardization Administration of China, and has been in force since 1 December 2005.

It replaces GB 11334-1989.

Classification: ICS 17.040.10, CCS J04.

About this edition

GB/T 11334-2005 is the current edition. It was issued on 16 May 2005 and has been in force since 1 December 2005, replacing GB 11334-1989.

GB 11334-1989 has been superseded: a specification that still cites it is citing a withdrawn edition.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one from the record of the Standardization Administration.

Classification and status

GB/T 11334-2005 is classified under ICS 17.040.10, in the field of metrology and measurement. ICS is the International Classification for Standards, the same scheme used by ISO and by the national bodies of most countries, which is what allows a Chinese standard to be placed beside its foreign counterparts on subject rather than on number.

Its Chinese Standard Classification code is CCS J04. CCS is the domestic scheme, a letter for the sector and two digits for the subject within it, and it is the code by which the standard is filed and searched in China.

The GB/T prefix marks a recommended national standard. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it. In practice that covers most of the cases in which it will be read — a purchase specification, an inspection agreement or a certification scheme.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

GB/T 1031-2009|GB/Z 24636.1-2009|GB/Z 24636.2-2009|GB/Z 24636.3-2009|GB/Z 24636.4-2009

Editions of GB/T 11334

Edition	Title	Revision	Status
GB/T 11334-2005	Geometrical Product Specifications(GPS)Cone tolerance	current edition	Current
GB 11334-1989	Cone tolerance	merged into this edition	Superseded

This page sells the current edition, GB/T 11334-2005. Earlier editions are listed for reference only.

How to Download GB/T 11334-2005

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.