YS/T — National Recommended

Found: 3795 — page 53 of 80

4 pages

YS/T 581.17-2010 — Determination of chemical contents and physical properties of aluminium fluoride. Part 17: Determination of flow time

National·Recommended
Valid$115.00
4 pages

YS/T 587.14-2010 — Calcined coke for carbon anode. Part 14: Determination of Hardgrove Grindability Index (HGI)

National·Recommended
Valid$105.00
7 pages

YS/T 725-2010 — Aluminium alloys sheets used for motor

National·Recommended
Valid$135.00
PDF

YS/T 726-2010 — Aluminum alloys sheets and strips used for lid and ring pull of pop can

National·Recommended
Superseded$195.00
PDF

YS/T 727-2010 — Aluminium and aluminium alloys strips used for capacitor crust

National·Recommended
Superseded$135.00
PDF

YS/T 728-2010 — Acrilic electrodeposition paint for aluminium alloy extruded profiles for architecture

National·Recommended
Superseded$285.00
PDF

YS/T 729-2010 — Aluminium-plastic composites profiles

National·Recommended
Superseded$225.00
PDF

YS/T 730-2010 — Wood grain profiles of aluminium alloys used for architecture

National·Recommended
Superseded$225.00
10 pages

YS/T 731-2010 — Combined profiles of aluminium alloy and wood-plastic composite used for architecture

National·Recommended
Valid$225.00
PDF

YS/T 732-2010 — Drawing of section of extruded aluminium and aluminium alloys profiles for commercial usage

National·Recommended
Superseded$9,830.00
4 pages

YS/T 733-2010 — Determination of the graphitization degree of the graphitized cathode used for aluminium production

National·Recommended
Valid$115.00
4 pages

YS/T 734-2010 — Carbon materials used for aluminium production. Testing method for dust Blaine fineness

National·Recommended
Valid$85.00
4 pages

YS/T 735-2010 — Determination of the ash content in carbon glue used for aluminium production

National·Recommended
Valid$109.00
4 pages

YS/T 736-2010 — Determination of the volatile matter content in carbon glue used for aluminium production

National·Recommended
Valid$109.00
7 pages

YS/T 737-2010 — Equipment for cutting in/out aluminium cells with full current

National·Recommended
Valid$135.00
4 pages

YS/T 738.1-2010 — Analysis method for aluminum hydroxide for filler. Part 1: Determination method of pH value

National·Recommended
Valid$109.00
4 pages

YS/T 738.2-2010 — Analysis method for aluminum hydroxide filler. Part 2: Determination method of soulble alkali

National·Recommended
Valid$115.00
4 pages

YS/T 738.3-2010 — Analysis method for aluminum hydroxide for filler. Part 3: Determination method of sulphur

National·Recommended
Valid$109.00
4 pages

YS/T 738.4-2010 — Analysis method for aluminum hydroxide for filler. Part 4: Determination method of viscosity

National·Recommended
Valid$109.00
PDF

YS/T 739-2010 — Determination of cryolite rate and main components of electrolyte. X-ray fluorescence spectrometric analysis method

National·Recommended
Withdrawn$165.00
4 pages

YS/T 74.1-2010 — Methods for chemical analysis of cadmium. Part 1: Determination of arsenic content-Hydride generation-atomic fluorescence spectrometry

National·Recommended
Valid$105.00
4 pages

YS/T 74.10-2010 — Methods of chemical anaysis of cadmium. Part 10: Determination of silver content. Flame atomic absorption spectrometry

National·Recommended
Valid$105.00
6 pages

YS/T 74.11-2010 — Methods for chemical analysis of cadmium. Part 11: Determination of arsenic, antimony, nickel, lead, copper, zinc, iron, thallium, tin and silver contents. Inductively coupled plasma atomic emission spectrometry

National·Recommended
Valid$135.00
4 pages

YS/T 74.2-2010 — Methods of chemical anaysis of cadmium. Part 2: Determination of antimony content. Hydride generation-atomic fluorescence spectrometry

National·Recommended
Valid$105.00
4 pages

YS/T 74.3-2010 — Methods of chemical anaysis of cadmium. Part 3: Determination of nickel content. Electrothermal atomic absorption spectrometry method

National·Recommended
Valid$105.00
6 pages

YS/T 74.4-2010 — Methods of chemical anaysis of cadmium. Part 4: Determination of lead content. Flame atomic absorption spectrometry

National·Recommended
Valid$165.00
4 pages

YS/T 74.5-2010 — Methods of chemical anaysis of cadmium. Part 5: Determination of copper content. Lead diethyldithio-carbamate spectrophotometry

National·Recommended
Valid$105.00
6 pages

YS/T 74.6-2010 — Methods of chemical anaysis of cadmium. Part 6: Determination of zinc content. Flame atomic absorption spectrometry

National·Recommended
Valid$135.00
4 pages

YS/T 74.7-2010 — Methods of chemical anaysis of cadmium. Part 7: Determination of iron content. 1, 10-Phenanthroline spectrophotometry

National·Recommended
Valid$105.00
4 pages

YS/T 74.8-2010 — Methods of chemical anaysis of cadmium. Part 8: Determination of thallium content. Crystal violet spectrophotometry

National·Recommended
Valid$85.00
6 pages

YS/T 74.9-2010 — Methods of chemical anaysis of cadmium. Part 9: Determination of tin content. Hydride generation-atomic fluorescence spectrometry

National·Recommended
Valid$165.00
4 pages

YS/T 740-2010 — Method for determination of caustic alkalinity in wastewater of alumina industry

National·Recommended
Valid$115.00
4 pages

YS/T 741-2010 — Gallium oxide

National·Recommended
Valid$105.00
4 pages

YS/T 742-2010 — Methods for chemical analysis of gallium oxide. Determination of impurities. Inductively coupled plasma mass spectrometer method

National·Recommended
Valid$115.00
6 pages

YS/T 743-2010 — Determination of gaseous flouride in purification system for electrolyzed aluminium by alkali-paper sampling and flourine ion-ive electrode analysis

National·Recommended
Valid$135.00
7 pages

YS/T 744-2010 — Battery grade anhydrous lithium chloride

National·Recommended
Valid$115.00
4 pages

YS/T 745.1-2010 — Methods for chemical analysis of copper anode slime. Part 1: Determination of copper content. Iodine titration method

National·Recommended
Valid$115.00
PDF

YS/T 745.2-2010 — Methods for chemical analysis of copper anode slime. Part 2: Determination of gold content and silver content. Fire assay gravimetric method

National·Recommended
Superseded$199.00
4 pages

YS/T 745.3-2010 — Methods for chemical analysis of copper anode slime. Part 3: Determination of platinum content and palladium comtent. Fire assay collection-inductively coupled coupled plasma atomic emission spectrometric methods

National·Recommended
Valid$115.00
4 pages

YS/T 745.4-2010 — Methods for chemical analysis of copper anode slime. Part 4: Determination of selenium content. Iodine titrimetric method

National·Recommended
Valid$115.00
4 pages

YS/T 745.5-2010 — Methods for chemical analysis of copper anode slime. Part 5: Determination of tellurium content. Potassium dichromate titrimetric method

National·Recommended
Valid$115.00
6 pages

YS/T 745.6-2010 — Methods for chemical analysis of copper anode slime. Part 6: Determination of lead content. Na2EDTA titrimetric method

National·Recommended
Valid$135.00
7 pages

YS/T 745.7-2010 — Methods for chemical analysis of copper anode slime. Part 7: Determination of bismuth content. Flame atomic absorption spectrometric method and Na2EDTA titrimetric method

National·Recommended
Valid$165.00
4 pages

YS/T 745.8-2010 — Methods for chemical analysis of copper anode slime. Part 8: Determination of arsenic content. Hydride generation-atomic fluorescence spectrometry method

National·Recommended
Valid$115.00
4 pages

YS/T 746.1-2010 — Methods for chemical analysis of lead-free tin-based solders. Part 1: Determination of tin content. Pyrogallic acid demasking-lead nitrate titrimetric method

National·Recommended
Valid$105.00
4 pages

YS/T 746.10-2010 — Methods for chemical analysis of lead-free tin-based solders. Part 10: Determination of aluminum content. Electrothothermal atomic absorption spectrometric method

National·Recommended
Valid$105.00
4 pages

YS/T 746.11-2010 — Methods for chemical analysis of lead-free tin-based solders. Part 11: Determination of Cadmium content. Flame atomic absorption spectrometric method

National·Recommended
Valid$105.00
4 pages

YS/T 746.12-2010 — Methods for chemical analysis of lead-free tin-based solders. Part 12: Determination of Indium content. Na2EDTA titrimetric method

National·Recommended
Valid$85.00