YS/T 587.14-2010Calcined coke for carbon anode. Part 14: Determination of Hardgrove Grindability Index (HGI) (English PDF)
炭阳极用煅后石油焦检测方法 第14部分:哈氏可磨性指数(HGI)的测定
This is a limited preview
Buy now to download the full PDF (4 pages)
Need quotation for your management?
Get a formal quotation for YS/T 587.14-2010 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
November 22, 2010
Implementation date
March 1, 2011
Scope
YS/T 587.14-2010 is the English-translated version of 炭阳极用煅后石油焦检测方法 第14部分:哈氏可磨性指数(HGI)的测定.
YS/T 587.14-2010 — YS/T in this part 587 specifies the method for determination of carbon anode Calcined petroleum coke Hastelloy grindability index (HGI) of. This section applies to the carbon anode with calcined petroleum coke Hastelloy grindability index (HGI) measurement.
Found what you need?
Document preview — YS/T 587.14-2010
National Standard of the People's Republic of China
- ICS
- 71.100.10
- Classification
- Q 52
Issued by: Ministry of Industry and Information Technology
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 PRINCIPLE OF THE METHOD
- 4 Definitions
- 5 Instruments
- 5.1 Grindability tester
- 6 Sampling
Foreword
YS/T 587 "carbon anode with calcined petroleum coke detection method," a total of 14 parts.
--- Part 1. Determination of ash content;
--- Part 2. Determination of moisture content;
--- Part 3. Determination of volatile content;
--- Part 4. Determination of sulfur content;
--- Part 5. Determination of trace elements;
--- Part 6. Determination of powder resistivity;
Part --- Article 7. CO2 reactivity was measured by mass loss method;
--- Part 8. Determination of the reactivity to air mass loss method;
--- Part 9. Determination of true density;
--- Part 10. Determination of tapped bulk density method;
--- Part 11. Determination of particle stability;
--- Part 12. Determination of particle size distribution;
--- Part 13. Determination of Lc (crystallite size) values;
--- Part 14. Hastelloy grindability index (HGI) measurement.
This is Part 14.
This section referring ASTMD5003-2006 "petroleum coke Hardgrove grindability index (HGI) Standard Test Method for" the preparation of the present and the degree of consistency ASTMD5003-2006 part of non-equivalent.
The non-ferrous metal part by the National Standardization Technical Committee (SAC/TC243) proposed.
This part of the Aluminum Corporation of China Zhengzhou Research Institute, China Nonferrous Metals Industry Institute of Standards Metrology and Quality is responsible for drafting.
This section Shandong Chenyang Carbon Co., Ltd., Shandong Nanshan Aluminum Co., Ltd. participated in the drafting.
1 Scope
YS/T in this part 587 specifies the method for determination of carbon anode Calcined petroleum coke Hastelloy grindability index (HGI) of.
This section applies to the carbon anode with calcined petroleum coke Hastelloy grindability index (HGI) measurement.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 26297.6 carbonaceous materials used in aluminum sampling methods - Part 6. calcined petroleum coke
3 PRINCIPLE OF THE METHOD
After a certain size range and quality calcined petroleum coke, conditions after grindability tester ground in a predetermined sieve, sieve material weighing quality. Obtained from a standard sample after grindability index curve calcined petroleum coke grindability index.
4 Definitions
Hastelloy grindability index (HGI) Hardgrovegrindabilityindex After relatively easy to determine the pulverized calcined petroleum coke grindability index by comparing the standard curve. HGI higher the value, after calcined petroleum the easier coke mill.
5 Instruments
5.1 Grindability tester
5.2 Test sieve. sieve test round, diameter 200mm, height 50mm, including the cover and sieve bottom. Cover, sieve, sieve bottom can be composed of a A screening test systems. Mesh size of 4.76mm, 1.19mm, 0.59mm, 0.074mm.
5.3 vibration sieve machine. hit the top sieve shaker, oscillating frequency 221 times/min, rapping frequency 147 times/min.
5.4 Balance. a sense of the amount of 0.01g.
5.5 Second splitter.
5.6 protection screen. Can set in the test sieve pore size 13mm ~ 19mm.
6 Sampling
After carbon anode calcined petroleum coke according to GB/T 26297.6 sampled.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 4 pages — is available in the English PDF.
Referenced standards
How to Download YS/T 587.14-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 26297.6-2010 — Sampling of carbonaceous materials used for aluminium production -- Part 6: Cokes for electrodes
YS/T 587.1-2006 — Calcined coke for prebaked blocks. Testing methods. Part 1: Determination of ash content
YS/T 587.10-2016 — Calcined coke for carbon anode--Part 10: Determination of bulk density
Secure payment via Stripe
Payments accepted
YS/T 587.14-2010
$134.00