Valid

QC/T 66-2014Wet clutches for motorcycles and mopeds (English PDF)

摩托车和轻便摩托车湿式离合器

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for QC/T 66-2014 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 6, 2014

Implementation date

October 1, 2014

Scope

QC/T 66-2014 is the English-translated version of 摩托车和轻便摩托车湿式离合器.

QC/T 66-2014 is the Chinese automotive industry standard for wet clutches fitted to motorcycles and mopeds. It sets the requirements for these clutches together with the test methods, the inspection rules and the provisions on marking, packaging, transport and storage.

Its subject is the wet multi-plate clutch used in the driveline of motorcycles and mopeds. The document leans on a broad set of material, lubricant and sampling references, among them GB/T 191-2008, GB/T 1348-2009, GB/T 2828.1-2003, GB/T 3077-1999, GB/T 9349-2010, GB 11121-2006, GB/T 15114-2009, GB/T 15115-2009 and JB/T 10310-2011.

It replaces QC/T 66-1993. Issued on 6 May 2014, it has applied since 1 October 2014.

Found what you need?

Document preview — QC/T 66-2014

National Standard of the People's Republic of China

ICS: 43.140
Replacing: QC/T 66-1993

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

1 Scope
2 Normative references

1 Foreword

QC/T 66-2014 was issued by MIIT on 6 May 2014 and has been in force since 1 October 2014.

2 Scope

This standard is the Chinese automotive industry standard for wet clutches fitted to motorcycles and mopeds. It sets the requirements for these clutches together with the test methods, the inspection rules and the provisions on marking, packaging, transport and storage. Its subject is the wet multi-plate clutch used in the driveline of motorcycles and mopeds. The document leans on a broad set of material, lubricant and sampling references, among them GB/T 191-2008, GB/T 1348-2009, GB/T 2828.1-2003, GB/T 3077-1999, GB/T 9349-2010, GB 11121-2006, GB/T 15114-2009, GB/T 15115-2009 and JB/T 10310-2011. It replaces QC/T 66-1993.

3 Normative references

QC/T 66-2014 cites the following standards, which apply in full or in part through the references made to them in its clauses.

GB/T 191-2008

GB/T 1348-2009

GB/T 2828.1-2003

GB/T 3077-1999

GB/T 9349-2010

GB/T 10042

GB 11121-2006

GB/T 15114-2009

GB/T 15115-2009

JB/T 10310-2011 — Specification for powder metallurgy driven gears used in motorcycle clutches

4 About this standard

Issued by: MIIT

English translation: about 15 pages

5 Classification and status

International classification (ICS): 43.140

Prefix QC/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

QC/T 738-2024|QC/T 792-2022|QC/T 1144-2021|QC/T 1152-2021|QC/T 417-2021|QC/T 62-2021

Editions of QC/T 66

Edition	Title	Revision	Status
QC/T 66-2014	Wet clutches for motorcycles and mopeds	current edition	Current
QC/T 66-1993	Wet clutches for motorcycles and mopeds	previous edition	Superseded

This page sells the current edition, QC/T 66-2014. Earlier editions are listed for reference only.

How to Download QC/T 66-2014

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.