JB/T 10310-2011Specification for powder metallurgy driven gears used in motorcycle clutches (English PDF)
摩托车离合器用粉末冶金从动齿轮 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10310-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
April 1, 2012
Scope
JB/T 10310-2011 is the English-translated version of 摩托车离合器用粉末冶金从动齿轮 技术条件.
JB/T 10310-2011 is a recommended Chinese machinery industry standard for the driven gears of motorcycle clutches made by powder metallurgy. It lays down the technical requirements these gears must meet and the test methods used to check them.
Inspection rules are given, together with the provisions for marking, packaging, transport and storage. Clutch driven gears for motorcycles produced by powder metallurgy are what it addresses.
The document carries the Chinese classification H72 and the international classification 77.160, and the Ministry of Industry and Information Technology issued it.
Among the standards it quotes are GB/T 223.7, GB/T 1958-2004, GB/T 5163, GB/T 9097.1, GB/T 10095.1-2008 and JB/T 7905. It replaces JB/T 10310-2001.
Found what you need?
Document preview — JB/T 10310-2011
National Standard of the People's Republic of China
- ICS
- 77.160
- Replacing
- JB/T 10310-2001
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 10310-2011 was issued by MIIT on 20 December 2011 and has been in force since 1 April 2012.
It replaces the earlier edition JB/T 10310-2001.
2 Scope
This standard is a recommended Chinese machinery industry standard for the driven gears of motorcycle clutches made by powder metallurgy. It lays down the technical requirements these gears must meet and the test methods used to check them. Inspection rules are given, together with the provisions for marking, packaging, transport and storage. Clutch driven gears for motorcycles produced by powder metallurgy are what it addresses. The document carries the Chinese classification H72 and the international classification 77.160, and the Ministry of Industry and Information Technology issued it. Among the standards it quotes are GB/T 223.7, GB/T 1958-2004, GB/T 5163, GB/T 9097.1, GB/T 10095.1-2008 and JB/T 7905. It replaces JB/T 10310-2001.
3 Normative references
JB/T 10310-2011 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 223.7
GB/T 223.25
GB/T 223.53
GB/T 223.69
GB/T 1958-2004
GB/T 5163
GB/T 5318
GB/T 7963
GB/T 7964
GB/T 9096
GB/T 9097.1
GB/T 10095.1-2008
GB/T 10095.2-2008
GB/T 12767
JB/T 7905
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 10310-2001 (earlier edition)
6 Classification and status
International classification (ICS): 77.160
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 223.7Iron powder--Determination of iron content--Potassium dichromate titration method
- GB/T 223.25Methods for chemical analysis of iron, steel and alloy--The dimethylglyoxime gravimetric method forthe determination of nickel content
- GB/T 223.69Iron, steel and alloy - Determination of carbon contents - Gas-volumetric method after combustion in the pipe furnace
- GB/T 1958-2004Geometrical Product Specifications(GPS)—Geometrical tolerance—Verification
- GB/T 5163Sintered metal materials, excluding hard metals -- Permeable sintered metal materials -- Determination of density, oil content, and open porosity
- GB/T 5318Sintered metal materials (excluding hard metals) without notch impact test piece
GB/T 223.53
Similar standards
Editions of JB/T 10310
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10310-2011 | Specification for powder metallurgy driven gears used in motorcycle clutches | current edition | Current |
| JB/T 10310-2001 | Specification for powder metallurgy driven gears used in motorcycle clutches | previous edition | Superseded |
This page sells the current edition, JB/T 10310-2011. Earlier editions are listed for reference only.
How to Download JB/T 10310-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 12767-1991 — Powder metallurgy products--Surface roughness--Parameters and their values
GB/T 223.25-1994 — Methods for chemical analysis of iron, steel and alloy--The dimethylglyoxime gravimetric method forthe determination of nickel content
GB/T 223.69-2008 — Iron, steel and alloy - Determination of carbon contents - Gas-volumetric method after combustion in the pipe furnace
Secure payment via Stripe
Payments accepted
JB/T 10310-2011
$55.00