QC/T 220-2014Technical specifications for automotive fusible links (English PDF)
汽车用易熔线技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for QC/T 220-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
QC/T 220-2014 is the English-translated version of 汽车用易熔线技术条件.
QC/T 220-2014 is the recommended Chinese automotive industry standard covering fusible links for motor vehicles. It defines the automotive fusible link, states the requirements it has to meet, the test methods and the inspection rules, and sets the provisions for marking, packaging, transport and storage.
Its scope is the fusible link fitted to cars. The standard is applied with GB/T 2423.8, GB/T 2828.1, GB/T 4910, GB/T 5008.2, GB 7594.10, GB/T 25085-2010, QC/T 413, QC/T 417.1 and QC/T 29106-2004, among others.
This edition replaces QC/T 220-1996, and the Ministry of Industry and Information Technology issued it under the Chinese classification T36. Issued on 6 May 2014, it has applied since 1 October 2014.
Found what you need?
Document preview — QC/T 220-2014
National Standard of the People's Republic of China
- ICS
- 43.040.10
- Replacing
- QC/T 220-1996
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 2 Normative references
2 Normative references
QC/T 220-2014 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 2423.8
GB/T 2828.1
GB/T 4910
GB/T 5008.2
GB 7594.10
GB/T 25085-2010
GB/T 28046.3-2010
GB/T 28046.4-2010
QC/T 413
QC/T 417.1
QC/T 29106-2004
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2423.8Environmental testing for electric and electronic products - Part 2: Test methods - Test Ed: Free fall
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 4910Tinned round copper wire
- GB/T 5008.2Lead-acid starter batteries - Part 2: Dimensions of batteries and dimensions and marking of terminals
- GB/T 28046.3-2010Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 3: Mechanical loads
- GB/T 28046.4-2010Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 4: Climatic loads
GB 7594.10 · GB/T 25085-2010
Similar standards
Editions of QC/T 220
| Edition | Title | Revision | Status |
|---|---|---|---|
| QC/T 220-2014 | Technical specifications for automotive fusible links | current edition | Current |
| QC/T 220-1996 | Technical specifications for automotive fusible links | previous edition | Superseded |
This page sells the current edition, QC/T 220-2014. Earlier editions are listed for reference only.
How to Download QC/T 220-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2423.8-1995 — Environmental testing for electric and electronic products - Part 2: Test methods - Test Ed: Free fall
GB/T 2828.1-2012 — Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 4910-2022 — Tinned round copper wire
Secure payment via Stripe
Payments accepted
QC/T 220-2014
$145.00