QB/T 2952-2008Requirements for detergent marks and packaging (English PDF)
Also coversQBT2952-2008
This is a limited preview
Buy now to download the full PDF (9 pages)
Need quotation for your management?
Get a formal quotation for QB/T 2952-2008 in 30 minutes.
Issued by
Development and Reform Commission of the People’s Republic of China
Level / Type
National · Recommended
Issue date
March 12, 2008
Implementation date
September 1, 2008
Scope
QB/T 2952-2008 (Requirements for detergent marks and packaging) is available as an English-translated PDF.
QB/T 2952-2008 is the Chinese standard "Requirements for detergent marks and packaging". Its scope clause reads: This Standard specifies the requirements for the marking and packaging of all kinds of detergents including laundry powders, laundry detergents, laundry soaps, toilet soaps, dish washing detergents, bath lotions and hand lotions.
This Standard applies to the marking and packaging of all kinds of detergents including laundry powders, laundry detergents, laundry soaps, toilet soaps, dish washing detergents, bath lotions and hand lotions.
Its clauses include application scope; terms; marking; packaging; test method; application scope... 4; normative references... 4; terms... 4; marking... 5; packaging...
8; test method... 9; application scope; terms; marking; packaging; test method. It was issued by the Development and Reform Commission of the People’s Republic of China on 2008-03-12 and took effect on 2008-09-01.
Found what you need?
Document preview — QB/T 2952-2008
National Standard of the People's Republic of China
- ICS
- 71.100.35
Issued by: Development and Reform Commission of the People’s Republic of China
Contents
- Foreword...3
- 1 Application Scope...4
- 2 Normative References...4
- 3 Terms...4
- 4 Marking...5
- 5 Packaging...8
- 6 Test Method...9
Foreword
This Standard was proposed by China National Light Industry Council.
This Standard shall be under the jurisdiction of the National Standardization Centre on
Surface Active Agents and Detergents.
The drafting organizations of this Standard. National Cleaning Products Quality
Supervision and Inspection Center (Taiyuan), Nice Group Co., Ltd.
1 Application Scope
This Standard specifies the requirements for the marking and packaging of all kinds of
detergents including laundry powders, laundry detergents, laundry soaps, toilet soaps,
dish washing detergents, bath lotions and hand lotions.
This Standard applies to the marking and packaging of all kinds of detergents including
laundry powders, laundry detergents, laundry soaps, toilet soaps, dish washing
detergents, bath lotions and hand lotions.
2 Normative References
The provisions in following documents become the provisions of this Standard through
reference in this Standard. For dated references, the subsequent amendments
(excluding corrigendum) or revisions do not apply to this Standard, however, parties
who reach an agreement based on this Standard are encouraged to study if the latest
versions of these documents are applicable. For undated references, the latest edition
of the referenced document applies.
GB/T 191, Packaging – Pictorial Marking for Handling of Goods
GB 12904, Bar Code for Commodity - Retail Commodity Numbering and Bar Code
Marking
3 Terms
For the purposes of this document, the following terms apply.
3.1
mark
A joint name of all kinds of expressions which is used to identify products and their
mass, quantity, characteristics and use method. It can be expressed with words,
symbols, numbers, patterns and other exponents.
3.2
label
A carrier of marking which can be pasted or printed on marketing package.
3.3
marketing packaging
Packaging which is mainly for the purpose of marketing and comes to the consumers
along with its content.
3.4
transportation packing
Packing which is mainly for the purpose of transportation, contains several articles of
consumption and plays a role for the convenience of storage and transportation and
enhancement of protection.
3.5
net contents
The actual mass or volume of contents after subtracting packing containers and other
packing materials.
4 Marking
4.1 Forms
4.2 Basic requirements
4.3 Annotation content
4.3.1 Product name
A general name complying with product standards, or a special name reflecting the
true nature which is clear and easy to understand, shall be marked clearly in a striking
position of product label. A common name or popular name which will not cause
misleading or confusion.
4.3.5 Manufacturing date and guaranteed term
4.3.5.1 When it is required by laws or regulations or products' explicit standards or
the manufacturer needs to mark, marking is provided in accordance with one of the
following two methods.
4.3.7 Product type and quality grade
When the product type and quality grade are specified in the product standard, the
product type and quality grade shall be marked as specified in the product standard.
4.3.8 Mark and number of production license
The products which are subjected to production license, shall be marked with valid
production license mark and number.
4.4 Marking content
4.4.1 Place of manufacturer, which shall be true.
4.5 Marketing packaging
4.5.1 The marketing packaging shall be as specified in 4.3 and 4.4.
4.5.2 When the area of the maximum surface of product package is less than 10 cm2,
it is acceptable that only product name, manufacturer name, manufacturing date and
guaranteed terms are marked, and the other content is marked on the additional
exponents.
4.5.3 Products of nude packing may be left without marking.
4.6 Transportation packaging
5 Packaging
5.1 Classification
The product package is divided into two varieties in accordance with the function.
marketing package and transportation package.
5.2 Requirements for packaging materials
5.3 Requirements for package appearance
5.3.1 Classification of packaging defects
The quality defects of product package are divided into categories A and B. category
A includes general quality defects; category B includes minor quality defects.
5.3.2 Printing and labelling
All indexes of product printing and labelling shall be as specified in Table 1.
6 Test Method
Visual inspection.
QB/T 2952-2008
QB
LIGHT INDUSTRY STANDARD OF
THE PEOPLE'S REPUBLIC OF CHINA
ICS 71.100.35
Class no.. Y08
Record no.. 24044-2008
Requirements for Detergent Marking and Packaging
Issued on. MARCH 12, 2008
Implemented on. SEPTEMBER 1, 2008
Issued by. Development and Reform Commission of the People's
Republic of China
Table of Contents
Foreword... 3
1 Application Scope... 4
2 Normative References... 4
3 Terms... 4
4 Marking... 5
5 Packaging... 8
6 Test Method... 9
Foreword
This Standard was proposed by China National Light Industry Council.
This Standard shall be under the jurisdiction of the National Standardization Centre on
Surface Active Agents and Detergents.
The drafting organizations of this Standard. National Cleaning Products Quality
Supervision and Inspection Center (Taiyuan), Nice Group Co., Ltd.
1 Application Scope
This Standard specifies the requirements for the marking and packaging of all kinds of
detergents including laundry powders, laundry detergents, laundry soaps, toilet soaps,
dish washing detergents, bath lotions and hand lotions.
This Standard applies to the marking and packaging of all kinds of detergents including
laundry powders, laundry detergents, laundry soaps, toilet soaps, dish washing
detergents, bath lotions and hand lotions.
2 Normative References
The provisions in following documents become the provisions of this Standard through
reference in this Standard. For dated references, the subsequent amendments
(excluding corrigendum) or revisions do not apply to this Standard, however, parties
who reach an agreement based on this Standard are encouraged to study if the latest
versions of these documents are applicable. For undated references, the latest edition
of the referenced document applies.
GB/T 191, Packaging – Pictorial Marking for Handling of Goods
GB 12904, Bar Code for Commodity - Retail Commodity Numbering and Bar Code
Marking
3 Terms
For the purposes of this document, the following terms apply.
3.1
mark
A joint name of all kinds of expressions which is used to identify products and their
mass, quantity, characteristics and use method. It can be expressed with words,
symbols, numbers, patterns and other exponents.
3.2
label
A carrier of marking which can be pasted or printed on marketing package.
3.3
marketing packaging
Packaging which is mainly for the purpose of marketing and comes to the consumers
along with its content.
3.4
transportation packing
Packing which is mainly for the purpose of transportation, contains several articles of
consumption and plays a role for the convenience of storage and transportation and
enhancement of protection.
3.5
net contents
The actual mass or volume of contents after subtracting packing containers and other
packing materials.
4 Marking
4.1 Forms
4.2 Basic requirements
4.3 Annotation content
4.3.1 Product name
A general name complying with product standards, or a special name reflecting the
true nature which is clear and easy to understand, shall be marked clearly in a striking
position of product label. A common name or popular name which will not cause
misleading or confusion.
4.3.5 Manufacturing date and guaranteed term
4.3.5.1 When it is required by laws or regulations or products' explicit standards or
the manufacturer needs to mark, marking is provided in accordance with one of the
following two methods.
4.3.7 Product type and quality grade
When the product type and quality grade are specified in the product standard, the
product type and quality grade shall be marked as specified in the product standard.
4.3.8 Mark and number of production license
The products which are subjected to production license, shall be marked with valid
production license mark and number.
4.4 Marking content
4.4.1 Place of manufacturer, which shall be true.
4.5 Marketing packaging
4.5.1 The marketing packaging shall be as specified in 4.3 and 4.4.
4.5.2 When the area of the maximum surface of product package is less than 10 cm2,
it is acceptable that only product name, manufacturer name, manufacturing date and
guaranteed terms are marked, and the other content is marked on the additional
exponents.
4.5.3 Products of nude packing may be left without marking.
4.6 Transportation packaging
5 Packaging
5.1 Classification
The product package is divided into two varieties in accordance with the function.
marketing package and transportation package.
5.2 Requirements for packaging materials
5.3 Requirements for package appearance
5.3.1 Classification of packaging defects
The quality defects of product package are divided into categories A and B. category
A includes general quality defects; category B includes minor quality defects.
5.3.2 Printing and labelling
All indexes of product printing and labelling shall be as specified in Table 1.
6 Test Method
Visual inspection.
......
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.
Referenced standards
Normative references
How to Download QB/T 2952-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 12904-2008 — Bar code for commodity -- Retail commodity numbering and bar code marking
GB/T 191-2025 — Graphical symbols marking for handling and storage of packages
GB/T 1910-2015 — Newsprint
Secure payment via Stripe
Payments accepted
QB/T 2952-2008
$45.00