GB/T 34855-2017Hand cleaner (English PDF)
洗手液
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34855-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 1, 2017
Implementation date
May 1, 2018
Scope
GB/T 34855-2017 is the English-translated version of 洗手液.
GB/T 34855-2017 is the Chinese standard "Hand cleaner". Its scope clause reads: This Standard specifies product classification and marking, requirements, test methods, inspection rules, identification, packaging, transportation and storage for hand cleaner.
This Standard is applicable to products formulated with surfactants as active ingredients for hand cleaning. This Standard is not applicable to non-washable products.
Its clauses include production classification and marking; requirements; test methods; inspection rules; identification, packaging, transportation and storage. It was issued by the General Administration of Quality Supervision, Inspection and Quarantine on NOVEMBER 01, 2017 and took effect on MAY 01, 2018.
Found what you need?
Document preview — GB/T 34855-2017
National Standard of the People's Republic of China
- ICS
- 71.100.40
- Classification
- Y 43
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- 1 Scope4
- 2 Normative references4
- 3 Production classification and marking4
- 4 Requirements5
- 5 Test methods6
- 6 Inspection rules7
- 7 Identification, packaging, transportation and storage7
1 Scope
This Standard specifies product classification and marking, requirements, test methods, inspection rules, identification, packaging, transportation and storage for hand cleaner.
This Standard is applicable to products formulated with surfactants as active ingredients for hand cleaning. This Standard is not applicable to non-washable products.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 6682, Water for analytical laboratory use - Specification and test methods
GB/T 13173-2008, Surface active agents - Detergents - Testing methods
GB/T 26396-2011, Technical specification for safety of soaps and detergents
QB/T 2951, Inspecting rules for detergent products
QB/T 2952, Requirements for detergent marks and packaging Cosmetic Safety Technical Specifications (Edition 2015) by China Food and Drug Administration
3 Production classification and marks
3.1 Product classification
Hand cleaner products are divided into ordinary type and concentrated type.
3.2 Product marks
See Table 1 for the product marking method. b The pH test concentration is 1:10 (mass ratio).
4 Requirements
4.3 Hygiene requirements
The requirements for limit values of product microbiological indicators (total number of colonies, total number of molds and yeasts, heat-resistant coliforms, Staphylococcus aureus, Pseudomonas aeruginosa), harmful substances (mercury, lead, arsenic, cadmium, methanol, dioxane) shall comply with Cosmetic Safety Technical Specifications (Edition 2015).
5 Test methods
Unless otherwise specified, in the analysis, it shall only use the confirmed analytically-pure reagent AND grade 3 water or above specified in GB/T 6682-2008.
5.1 Appearance
Measure not less than 200mL of sample. Place in a dry and clean colorless wide-mouth glass bottle with stopper. Observe under non-direct light conditions.
5.2 Odor
Take an appropriate amount of sample. Smell for identification.
5.3 Stability
Measure 2 portions of samples, not less than 100mL each. Respectively place in 250mL wide-mouth glass bottles with colorless stoppers. One portion is placed in an incubator at (40±2)°C for 24h. Take out the sample. After returning to room temperature, conduct comparison analysis with the pre-test sample.
The other portion is placed in the refrigerator at (-5±2)°C for 24h. Take out the sample. After returning to room temperature, conduct comparison analysis with the pre-test sample.
5.4 Total effective substance
Unless otherwise specified, the measurement shall be carried out according to Method A specified in Clause 7 of GB/T 13173-2008.
5.5 pH
In accordance with the method specified in Cosmetic Safety Technical Specifications (Edition 2015). […]
5.6 Formaldehyde
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 6682Water for analytical laboratory use - Specification and test methods
- GB/T 13173-2008Surface active agents - Test methods for detergents
- GB/T 26396-2011Safety technical specification for soaps and detergents
- QB/T 2951Inspecting Rules for Detergent Products
- QB/T 2952Requirements for detergent marks and packaging
Similar standards
How to Download GB/T 34855-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 26396-2011 — Safety technical specification for soaps and detergents
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
QB/T 2951-2008 — Inspecting Rules for Detergent Products
Secure payment via Stripe
Payments accepted
GB/T 34855-2017
$65.00