This is a limited preview
Buy now to download the full PDF (8 pages)
Need quotation for your management?
Get a formal quotation for QB/T 1994-2013 in 30 minutes.
Issued by
Ministry of Industry and Information Technology of PRC
Level / Type
National · Recommended
Issue date
October 17, 2013
Implementation date
March 1, 2014
Scope
QB/T 1994-2013 (Bath agents and shower agents) is available as an English-translated PDF.
QB/T 1994-2013 is the Chinese standard "Bath agents and shower agents". Its scope clause reads: This standard specifies the terms and, product classification and marking, requirements, test methods, inspection rules, signs, packaging, transport, storage and shelf life of bath agents and shower agents.
This standard applies to cleansing products formulated with surfactants and conditioning agents for cleansing and moisturizing the skin (except soap). Its clauses include terms and definitions.
It was issued by the Ministry of Industry and Information Technology of PRC on 2013-10-17 and took effect on 2014-03-01.
Found what you need?
Document preview — QB/T 1994-2013
National Standard of the People's Republic of China
- ICS
- 71.100.40
Issued by: Ministry of Industry and Information Technology of PRC
Contents
- Foreword...3
- 1 Scope...4
- 2 Normative references...4
- 3 Terms and definitions...4
- 4 Product classification and marking...5
- 5 Requirements...5
- 6 Test method...6
- 7 Inspection rules...8
- 8 Signs, packaging, transport, storage...8
- 9 Shelf life...8
1 Scope
This standard specifies the terms and, product classification and marking, requirements, test methods, inspection rules, signs, packaging, transport, storage and shelf life of bath agents and shower agents.
This standard applies to cleansing products formulated with surfactants and conditioning agents for cleansing and moisturizing the skin (except soap).
2 Normative references
The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this standard.
GB/T 13173 -2008 Surfactant - Test method for detergent (ISO 607:1980,
ISO 2996:1974, MOD)
GB/T 26396-2011 Technical specification for safety of soaps and detergents
QB/T 2951 Inspecting rules for detergent products
QB/T 2952 Requirements for detergent marks and packaging
JJF 1070 Rules of metrological testing for net quantity of products in prepackages with fixed content
“Measures for the Supervision and Administration of Measurement of
Quantitative Packaging Commodities” -- State Administration of Quality
Supervision, Inspection and Quarantine – [2005] Order No.75
WJDF [2007] No.1 "Hygienic Specifications for Cosmetics" (2007 edition)
3 Terms and definitions
The terms and definitions apply to this document.
3.1 light conditions.
Block products: Observe it in indirect light conditions.
6.2 Odor
Take an appropriate amount of specimen for identification by smelling.
6.3 Stability
Take two sets of specimens of not less than 100 mL. Respectively place it into
250 mL colorless wide-mouth glass bottle with stopper. Put one set in a (40 ±
2) °C incubator for 24 h. Take it out and restore it to room temperature to observe it. Put the other set in a (-5 ± 2) °C refrigerator for 24 h. Take it out and restore it to room temperature to observe it.
6.4 Total effective substance
Generally, make determination according to the method A as specified in
Chapter 7 of GB/T 13173-2008.
When the product contains the surfactant which is insoluble in ethanol, or in the ordering contract it specifies that the testing results of total effective substance content do not contain water cosolvent, meanwhile requires making determination by the trichloro-methane extraction, it shall be determined according to the method B in Chapter 7 of GB/T 13173-2008.
6.5 pH
Perform test according to the method as specified in WJDF [2007] No.1
"Hygienic Specifications for Cosmetics" (2007 edition).
The test temperature is 25 °C. Use the newly boiled and cooled distilled water to prepare it. The mass concentration of the test solution of the liquid or paste product is 10%; the solid product is 5%. Make determination after mixing it uniformly.
6.6 Mercury, lead, arsenic, microorganisms
Perform test according to the method as specified in WJDF [2007] No.1
"Hygienic Specifications for Cosmetics" (2007 edition).
6.7 Net content
Perform test according to the provisions of JJF 1070.
......
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 13173Surface active agents - Test methods for detergents
- GB/T 26396-2011Safety technical specification for soaps and detergents
- QB/T 2951Inspecting Rules for Detergent Products
- QB/T 2952Requirements for detergent marks and packaging
- JJF 1070Rules of Metrological Testing for Net Quantity of Products in Prepackages with Fixed Content
ISO 2996
How to Download QB/T 1994-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13173-2021 — Surface active agents - Test methods for detergents
GB/T 26396-2011 — Safety technical specification for soaps and detergents
JJF 1070-2023 — Rules of Metrological Testing for Net Quantity of Products in Prepackages with Fixed Content
Secure payment via Stripe
Payments accepted
QB/T 1994-2013
$75.00