Valid

QB/T 1685-2006Requirements of packaging appearance for cosmetic products (English PDF)

Preview PDF

Also coversQBT1685-2006

This is a limited preview

Buy now to download the full PDF (9 pages)

Need quotation for your management?

Get a formal quotation for QB/T 1685-2006 in 30 minutes.

Issued by

National Development and Reform Commission

Level / Type

National · Recommended

Issue date

December 17, 2006

Implementation date

August 1, 2007

Scope

QB/T 1685-2006 (Requirements of packaging appearance for cosmetic products) is available as an English-translated PDF.

QB/T 1685-2006 is the Chinese standard "Requirements of packaging appearance for cosmetic products". Its scope clause reads: This standard specifies the packaging classification, packaging material requirements, packaging appearance requirements and test methods of cosmetics.

This standard applies to cosmetic product packaging. Its clauses include packaging classification. It was issued by the National Development and Reform Commission on 2006-12-17 and took effect on 2007-08-01.

Found what you need?

Document preview — QB/T 1685-2006

National Standard of the People's Republic of China

ICS: 71.100.70

Issued by: National Development and Reform Commission

Foreword...3
1 Scope...4
2 Normative references...4
3 Packaging classification...4
4 Packaging material requirements...5
5 Packaging appearance requirements...5
6 Test method...9

1 Scope

This standard specifies the packaging classification, packaging material requirements, packaging appearance requirements and test methods of cosmetics.

This standard applies to cosmetic product packaging.

2 Normative references

The provisions in following documents become the provisions of this Standard through reference in this Standard. For the dated references, the subsequent amendments (excluding corrections) or revisions do not apply to this Standard;

however, parties who reach an agreement based on this Standard are encouraged to study if the latest versions of these documents are applicable.

For undated references, the latest edition of the referenced document applies.

GB/T 191 Packaging - Pictorial marking for handling of goods

GB 5296.3 Instruction for use of consumer products - General labelling for cosmetics

3 Packaging classification

According to the packaging form and material variety of cosmetics, it is divided into:

a) Bottles (including plastic bottles, glass bottles, etc.);

b) Cover (including outer cover, inner cover (plug, pad, film), etc.);

c) Bags (including paper bags, plastic bags, composite bags, etc.);

d) Hose (including plastic hose, composite hose, metal hose, etc.);

e) Box (including cartons, plastic boxes, metal boxes, etc.);

f) Spray cans (including pressure-resistant aluminum cans, iron cans, etc.);

5.3.1.2 The fitting between the inner cover and the outer cover shall be good.

5.3.1.3 The inner cover shall not be missed.

5.3.2 Outer cover

5.3.2.1 The outer cover shall be upright, smooth, free from break, crack, burr.

5.3.2.2 The color of the outer cover shall be uniform.

5.3.2.3 The thread matching structure of the outer cover shall be intact

5.3.2.4 The color of outer cover added with anodized aluminum or the gliding

outer cover shall be uniform.

5.3.2.5 The clamshell outer cover shall be flexible when opening and the connecting part is not broken.

5.3.2.6 The fit between the cover and the bottle is tight, without thread slip or loosening.

5.4 Bag

5.4.1 The bag shall not have obvious wrinkle, scratch, air bubble.

5.4.2 The color of the bag shall be uniform.

5.4.3 The sealing of the bag shall be firm. It shall not have opening, puncture, liquid/paste leakage.

5.4.4 Composite bags shall be firm, and the plating shall be uniform.

5.5 Hose

5.5.1 The body of the hose shall be smooth, tidy, uniform in thickness, without obvious scratches, uniform in color.

5.5.2 The sealing of hose shall be firm, upright; it shall not have opening or winkle (except for the normal die indentation).

5.5.3 The cover of the hose shall meet the requirements of 5.3.

5.5.4 The composite membrane of the hose shall not float.

5.6 Boxes

5.6.1 The surface of the box shall be smooth, upright; there shall be no obvious bottom scratches, burrs, serious flattening; the color shall be uniform.

5.11.1.2 The flower box shall be clean, upright, flat. The cover is well added;

there is no wrinkle, missing edge, missing corner.

5.11.1.3 The adhesion of the flower box shall be firm; there is no adhesion mark, crack, or stickiness.

5.11.1.4 The product is free from wrong package, miss package, reversed package.

5.11.2 Middle box

5.11.2.1 The middle box shall match the flower box package tightly.

5.11.2.2 The middle box shall be clean, upright, flat; the cover is well added.

5.11.2.3 The adhesion of the middle box shall be firm; there is no adhesion mark, crack, or stickiness.

5.11.2.4 The product is free from wrong package, miss package, reversed package.

5.11.2.5 The label of middle box shall be upright, clear, complete; indicated of the product name, specification, quantity in box, manufacturer according to needs.

5.11.3 Plastic sealing

5.11.3.1 The plastic sealing shall be firmly adhered and free from crack.

5.11.3.2 The surface of plastic sealing shall be clean and free from damage.

5.11.3.3 There are no wrong package, miss package, reversed package in the plastic sealing.

5.11.4 Transport packaging

5.11.4.1 The transport packaging shall be clean, upright, smooth; the box sealing shall be firm.

5.11.4.2 The product is free from wrong package, miss package, reversed package.

5.11.4.3 The transportation packaging signs shall be clear, complete, appropriate in position; be indicated of the product name, manufacturer and address, net content, product quantity, whole box mass (gross weight), volume, production date, warranty period or production batch number and limited date of use according to needs. It should select the pictorial sign in GB/T 191 according to needs.

......

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.

Referenced standards

Normative references

Cited by

How to Download QB/T 1685-2006

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.