Valid

GB/T 29665-2013Skin care lotion (English PDF)

护肤乳液

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29665-2013 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 6, 2013

Implementation date

August 1, 2014

Scope

GB/T 29665-2013 is the English-translated version of 护肤乳液.

GB/T 29665-2013 is the Chinese standard "Skin care lotion". Its scope clause reads: This standard specifies the classification, requirements, test methods, inspection rules, as well as signs, packaging, transportation, storage and shelf life for skin care lotion.

This standard is applicable to emulsified cosmetics with fluidity that care for human skin. This standard does not apply to multilayer products. Its clauses include classification; requirements; test method; inspection rules; marking, packaging, transportation, storage, shelf life.

It was issued by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China on SEPTEMBER 06, 2013 and took effect on AUGUST 01, 2014.

Found what you need?

Document preview — GB/T 29665-2013

National Standard of the People's Republic of China

ICS: 71.100.70
Classification: Y 42

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword3
1 Scope4
2 Normative references4
3 Classification4
4 Requirements5
4.1 Raw materials5
4.2 Sensory, physical-chemical, health indicators5
4.3 Net content6
4.4 Package appearance6
5 Test method6
5.1 Sensory indicators6
5.2 Physical-chemical indicators6
5.3 Hygienic indicators7
5.4 Net content7
5.5 Package appearance7
6 Inspection rules8
7 Marking, packaging, transportation, storage, shelf life8
7.1 Marking for sales packaging8
7.2 Packaging8
7.3 Transportation8
7.4 Storage8
7.5 Shelf life8

1 Scope

This standard specifies the classification, requirements, test methods, inspection rules, as well as signs, packaging, transportation, storage and shelf life for skin care lotion.

This standard is applicable to emulsified cosmetics with fluidity that care for human skin. This standard does not apply to multilayer products.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated versions apply to this document. For the cited documents without date, the latest version (including all amendments) applies to this document.

GB 5296.3 Instruction for use of consumer products - General labelling for cosmetics

GB/T 13531.1 General methods on determination of cosmetics - Determination of pH

GB/T 22731 Fragrance compound

QB/T 1684 Inspecting rules for cosmetics

QB/T 1685 Requirements of packaging appearance for cosmetic products

JJF 1070 Rules of metrological testing for net quantity of products in prepackages with fixed content Measures for the Supervision and Administration of Measurement of Quantitative Packaging Commodities -- State Administration of Quality Supervision, Inspection and Quarantine -- Order No.75 Hygienic specifications for cosmetics

3 Classification

According to emulsification type, it can be divided into oil-in-water type (I) and water-in-oil type (II).

5 Test method

5.2 Physical-chemical indicators

5.2.3 Cold resistance

5.2.3.1 Instruments

a) Thermometer: division value is 0.5°C;

b) Refrigerator: temperature control accuracy is ± 2°C.

5.2.3.2 Operating procedures

Pour the sample into two phi 20mm × 120mm test tubes; make the liquid level about 80mm; put a clean plug; put a test tube to be tested into a refrigerator that has been pre-adjusted to -8°C; after 24h, take it out; after returning to room temperature, visually compare it with the test sample in another test tube.

5.2.4 Centrifugal test

5.2.4.1 Instruments

a) Angle-type low speed tabletop centrifuge: the maximum relative centrifugal force is 19.6N ~ 30.7N;

b) Centrifuge tube: scale is 10mL, 2 pieces;

c) Electric heating constant temperature incubator: temperature control accuracy is ± 1°C;

d) Thermometer: The division value is 0.5°C.

5.2.4.2 Operation

Inject the sample into the centrifuge tube to the height of about 2/3; use stopper to plug it firmly. Then, put it into the electrothermal constant temperature culture that has been pre-adjusted to 38°C; after keeping it for 1h, immediately move it into the centrifuge; adjust the centrifuge to a centrifugal speed of 2000r/min; rotate it for 30min; take out for observation.

5.3 Hygienic indicators

According to the method specified in " Hygienic specifications for cosmetics".

5.4 Net content

Determine according to the method specified in JJF 1070.

5.5 Package appearance

Execute according to QB/T 1685. […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

GB 7916-2026|GB/T 29680-2026|GB/T 47331-2026|YY/T 10001-2026|YY/T 10002-2026|YY/T 10003-2026

How to Download GB/T 29665-2013

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.