GB/T 35914-2018Makeup-removal oil (lotion, emulsion, balm, cream) (English PDF)

3.1 Makeup-removal oil, makeup-removal balm

It is an oily or paste-like makeup-removal products that are made from mineral oil, animal and vegetable oils, synthetic esters, surfactants, flavors, pigments, etc. by mixing.

3.2 Makeup-removal lotion

It is a single-layer, easy-flowing makeup-removal products that are made from water, surfactants, flavors, pigments and other raw materials by mixing; or the multi-layer, easy-flowing makeup-removal products that are made from water, mineral oil, animal and vegetable oils, synthetic esters, surfactants, flavors, pigments, etc. by mixing or emulsifying.

3.3 Makeup-removal emulsion, makeup-removal cream

It is an oil-in-water makeup-removal products, with an emulsion or cream appearance, that are made from water, surfactants, mineral oil, animal and vegetable oils, synthetic esters, thickeners, flavors, pigments, etc. by emulsifying process.

5.1 Requirements for raw materials

The raw materials that are used in the products shall comply with the provisions of Safety and Technical Standards for Cosmetics (2015 Edition), and the used flavors shall meet the requirements of GB/T 22731.

6.2.1.3 Makeup-removal emulsion, makeup-removal cream

It shall be tested by the dilution method specified in 6.1.1 of GB/T 13531.1-2008.

6.2.2 Heat-resistance

6.2.2.1 Instrument

Constant temperature incubator: temperature control accuracy ±1°C.

6.2.2.2 Operating procedures

Adjust the constant temperature incubator to 40°C in advance; and place the completely-packaged specimen in the constant temperature incubator. Take out the specimen after 24h; and visually observe it after returning to the room temperature.

6.2.3 Cold-resistance

6.2.3.1 Instrument

Refrigerator: temperature control accuracy ±2°C.

6.2.3.2 Operating procedures

6.2.3.2.1 Makeup-removal lotion (Type-II)

Adjust the refrigerator to 5°C in advance, put the completely-packaged specimen in the refrigerator, take out the specimen after 24h; visually observe it after returning to the room temperature.

6.2.3.2.2 Makeup-removal oil, makeup-removal balm (Type-I); makeup-removal emulsion, makeup-removal cream (Type-III)

Adjust the refrigerator to -8°C in advance; place the completely-packaged specimen in the refrigerator; take out the specimen after 24h; visually observe it after returning to the room temperature.

6.2.4 Centrifugal test

6.2.4.1 Instrument

The test equipment is as follows:

a) Angle-type low-speed tabletop centrifuge, the maximum relative centrifugal force is 19.6N~30.7N;

b) Centrifuge tube: two with a scale of 10mL;

c) Electric heating constant temperature incubator: temperature control accuracy ±1°C; […]