Valid

QB/T 2660-2004Skin tonic (English PDF)

Preview PDF

Also coversQBT2660-2004

This is a limited preview

Buy now to download the full PDF (7 pages)

Need quotation for your management?

Get a formal quotation for QB/T 2660-2004 in 30 minutes.

Issued by

National Development and Reform Commission of PRC

Level / Type

National · Recommended

Issue date

December 14, 2004

Implementation date

June 1, 2005

Scope

QB/T 2660-2004 (Skin tonic) is available as an English-translated PDF.

QB/T 2660-2004 is the Chinese standard "Skin tonic". Its scope clause reads: This Standard specifies the product classification, requirements, test methods, inspection rules and marking, packaging, transportation and storage of skin tonic.

This Standard applies to water-based skin care products that supplement the water needed by the skin and protect the skin. Its clauses include inspection rules; marking, packaging, transportation, storage and.

It was issued by the National Development and Reform Commission of PRC on 2004-12-14 and took effect on 2005-06-01.

Found what you need?

Document preview — QB/T 2660-2004

National Standard of the People's Republic of China

ICS: 71.100.70

Issued by: National Development and Reform Commission of PRC

Foreword...3
1 Scope...4
2 Normative References...4
3 Product Classification...5
4 Requirements...5
5 Test Methods...6
6 Inspection Rules...7
7 Marking, Packaging, Transportation, Storage and Shelf Life...7

1 Scope

This Standard specifies the product classification, requirements, test methods, inspection rules and marking, packaging, transportation and storage of skin tonic.

This Standard applies to water-based skin care products that supplement the water needed by the skin and protect the skin.

2 Normative References

The provisions in following documents become the provisions of this Standard through reference in this Standard. For dated references, the subsequent amendments (excluding corrigendum) or revisions do not apply to this Standard, however, parties who reach an agreement based on this Standard are encouraged to study if the latest versions of these documents are applicable. For undated references, the latest edition of the referenced document applies.

GB 5296.3 Instruction for Use of Consumer Products - General Labelling for

Cosmetics

GB/T 13531.1 General Methods on Determination of Cosmetics - Determination of pH

GB/T 13531.4 General Methods on Determination of Cosmetics – Determination of Relative Density

QB/T 1684 Inspecting Rules for Cosmetics

QB/T 1685 Requirements of Packaging Appearance for Cosmetic Products

JJF 1070-2000 The Rules of Metrological Inspection for Net Content of

Prepackaged Commodity with Fixed Content

Measures for Metrological Supervision and Administration of Quantitative Packed

Commodities -- issued by State Bureau of Technical Supervision -- [1995] Order

No.43

No.229 WFJF [2002] Hygienic Specifications for Cosmetics

5.3 Physical-chemical indicators

5.3.1 Heat-resistant

5.3.1.1 Instrument

Constant temperature incubator: the temperature shall be controlled at ±1°C.

5.3.1.2 Operation procedure

Adjust the constant temperature incubator to (40 ± 1) °C in advance; and place a bottle of the completely-packaged specimen in the constant temperature incubator. Take it out after 24h, restore to room temperature and examine visually.

5.3.2 Cold-resistant

5.3.2.1 Instrument

Constant temperature incubator: the temperature shall be controlled at ±1°C.

5.3.2.2 Operation procedure

Adjust the constant temperature incubator to (5 ± 1) °C in advance; and place a bottle of the completely-packaged specimen in the constant temperature incubator. Take it out after 24h, restore to room temperature and examine visually.

5.3.3 pH

It shall be tested according to the method specified in GB/T 13531.1 (direct measurement method).

5.3.4 Relative density

It shall be tested according to the method specified in GB/T 13351.4.

5.4 Deviation of net content

It shall be tested according to the method specified in 6.1.1 of JJF 1070-2000.

6 Inspection Rules

It shall be implemented as per QB/T 1684.

7 Marking, Packaging, Transportation, Storage and

......

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.

Referenced standards

Normative references

How to Download QB/T 2660-2004

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.