JB/T 9792-2013Separating-type rice milling machines (English PDF)
分离式稻谷碾米机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9792-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 9792-2013 is the English-translated version of 分离式稻谷碾米机.
JB/T 9792-2013 is a recommended machinery industry standard of China for separating-type paddy rice milling machines. It specifies the product models, the technical requirements, the safety requirements, the test methods and the inspection rules, and then marking, packaging, transport and storage.
The machines covered are rice mills of the separating type. It replaces JB/T 9792.1-1999 and JB/T 9792.3-1999. Among the standards it quotes are GB 1350, GB 1354, GB/T 2828.1-2003, GB/T 5491, GB/T 5502, GB/T 9239.1-2006, GB/T 9480, GB 10396-2006 and GB/T 17891.
The Chinese classification is B93 and the international classification 65.060.99.
Found what you need?
Document preview — JB/T 9792-2013
National Standard of the People's Republic of China
- ICS
- 65.060.99
- Replacing
- JB/T 9792.3-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 9792-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
It is one of 4 parts of the JB/T 9792 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended machinery industry standard of China for separating-type paddy rice milling machines. It specifies the product models, the technical requirements, the safety requirements, the test methods and the inspection rules, and then marking, packaging, transport and storage. The machines covered are rice mills of the separating type. It replaces JB/T 9792.1-1999 and JB/T 9792.3-1999. Among the standards it quotes are GB 1350, GB 1354, GB/T 2828.1-2003, GB/T 5491, GB/T 5502, GB/T 9239.1-2006, GB/T 9480, GB 10396-2006 and GB/T 17891. The Chinese classification is B93 and the international classification 65.060.99.
JB/T 9792-2013 falls under ICS 65.060.99, in the field of agriculture.
This catalogue holds 368 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB 1350
GB 1354
GB/T 2828.1-2003 — Sampling procedures - Part 1: retrieval by acceptance quality limit (AQL) for lot-by-lot inspection sampling plan
GB/T 3785.1
GB/T 5491
GB/T 5492
GB/T 5493
GB/T 5494
GB/T 5495
GB/T 5496
GB/T 5497
GB/T 5502
GB/T 5503
GB/T 9239.1-2006 — Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances
GB/T 9480
GB 10396-2006 — Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Safety signs and hazard pictorials -- General principles
GB/T 12620
GB 13306-2006
GB/T 17891
GB/T 21719
4 Where this standard sits
It cites 21 standards, among them GB/T 2828.1-2003, GB/T 9239.1-2006, GB 10396-2006, listed in full above.
It is one part of the JB/T 9792 series, of which this catalogue holds 4 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 9792.1-1999 — Separating-type paddy rice mills - Technical requirements
JB/T 9792.2-1999 — Separating-type coarse grain mills - Technical requirements
JB/T 9792.3-1999 — Separating-type rice mills - Test methods
Standards on related subjects:
GB/T 12785-2014 — Test methods for submersible motor-pumps
GB 10395.19-2010 — Agricultural and forestry machinery - Safety - Part 19:Centre pivot and moving lateral types irrigation machines
JB/T 10600-2006 — Vertical self-priming pumps
JB/T 5674-2025 — Tea tree pruning machine
JB/T 9794-2013 — Agricultural hydraulic oil presses
JB/T 9793-2013 — Agricultural screw oil presses
7 Classification and status
International classification (ICS): 65.060.99
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB 1350Paddy
- GB 1354Rice
- GB/T 2828.1-2003Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 3785.1Electroacoustics - Sound level meters - Part 1: Specifications
- GB/T 5491Inspection of grain and oil seeds - Sampling and dividing
GB 13306-2006
Similar standards
Editions of JB/T 9792
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9792-2013 | Separating-type rice milling machines | current edition | Current |
| JB/T 9792.3-1999 | Separating-type rice milling machines | previous edition | Superseded |
This page sells the current edition, JB/T 9792-2013. Earlier editions are listed for reference only.
How to Download JB/T 9792-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 10396-2006 — Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Safety signs and hazard pictorials -- General principles
GB 1350-1986 — Paddy
GB 1350-1999 — Paddy
JB/T 9792-2013
$195.00