JB/T 9018-2011Automated storage and retrieval system - Design rules (English PDF)

Foreword

This Standard was drafted as per the rules specified in GB/T 1.1-2009.

This Standard replaced JB/T 9018-1999 High-Bay Warehouse - Design Rules; compared with JB/T 9018-1999, this Standard has the major technical changes as follows.

--- Modify the standard name from "High-Bay Warehouse - Design Rules" to "Automated Storage and Retrieval System - Design Rules";

--- Modify the codes of row-direction and bay-direction in the "Terms" (3.9, 3.11 of this Edition; 3.8, 3.9 of 1999 Edition), and re-define them;

--- Modify the length and width dimension of unit-goods (4.2 of this Edition; 4.2 of 1999 Edition);

--- Modify the appearance dimension deviation of the unit-goods (4.3 of this Edition;

4.3 of 1999 Edition);

--- Expand the parameter range and increase the specifications for the lifting speed, operating speed of stacker crane, the telescopic speed of goods fork (Table 5 of this Edition; Table 5 of 1999 Edition);

--- Modify the requirements for the basic design of the warehouse (7.1 of this Edition;

7.2 of 1999 Edition);

--- Revise the minimum distance between the outermost side on the horizontally-operating terminal of the storage/retrieval machine; cancel the provisions of 1800mm below parts (8.1 of this Edition; 9.1 of 1999 Edition);

--- Combine the requirements for "safety protection device" into one sub-clause (6.6 of this Edition; 8.1~8.8 of 1999 Edition);

--- Add "6.7 operating environment requirements for storage/retrieval machine".

1 Scope

This Standard specifies the basic design requirements for the automated storage and retrieval system (hereinafter referred to as storage and retrieval system) unit-goods, rack, aisle stacking crane (hereinafter referred to as storage/retrieval machine), warehouse building, cell and ability into and out of the warehouse.

This Standard is applicable to the automated storage and retrieval system with the ability of storing (taking) unit-goods, consisted of steel structure rack, storage/retrieval machine and handling equipment.

2 Normative References

The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this document.

GB/T 700-2006 Carbon Structural Steels

GB/T 783 Lifting Appliance - Range of Maximum Capacities

GB/T 3811-2008 Design Rules for Cranes

GB/T 4205 Basic and Safety Principles for Man-Machine Interface (MMI), Marking and Identification - Actuating Principles

GB 50009 Load Code for the Design of Building Structure

GB 50016 Code of Design on Building Fire Protection and Prevention

GB 50017 Code for Design of Steel Structures

GB 50018 Technical Code of Cold-Formed Thin-Wall Steel Structure

JB/T 2960 Aisle Stacking Crane - Types and Basic Parameters

JB/T 7016 Storage/Retrieval Machine - Technical Specifications

JB/T 10823 Automated Storage and Retrieval System - Vocabulary storage/retrieval machine [see Figure 1 b), c) and Figure 2 b), c)].

3 Terms

6 Storage/Retrieval Machine

7 Warehouse Building

7.1 The basic design of warehouse shall take into account of the geological conditions, working load and other factors; strictly control the non-uniform settlement and deformation of the track basic bearing panel (or bearing beam) of storage/retrieval machine and rack. […]