Valid

JB/T 8521.2-2007Textile slings - Safety - Part 2: Round slings made of man-made fibres for general purpose use (English PDF)

编织吊索 安全性 第2部分:一般用途合成纤维圆形吊装带

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 8521.2-2007 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 29, 2007

Implementation date

November 1, 2007

Scope

JB/T 8521.2-2007 is the English-translated version of 编织吊索 安全性 第2部分:一般用途合成纤维圆形吊装带.

JB/T 8521.2-2007 is the Chinese standard "Textile slings - Safety - Part 2: Round slings made of man-made fibres for general purpose use".

Its scope clause reads: This Part of JB/T 8521 specifies the methods of rating and testing the roundslings (hereinafter referred to as slings) up to 100t maximum working limit load in straight lift and two-, three-, and four-leg slings(with or without fittings), made of such man-made fibres as polyamide, polyester and polypropylene.

This Part applies to general lifting services of materials and goods. Lifting operations not covered by this Part include the lifting of persons, potentially dangerous materials such as molten metal, acids, glass sheets, fragile article, nuclear reactors and where special conditions apply.

Slings conforming to this Part are suitable for use and storage in the following temperature ranges: a) Polyester and polyamide: -40°C~100°C; b) Polypropylene: -40°C~80°C. This Part does not apply to the types of sling indicated below: a) Slings designed for securing or lashing of cargoes to each other on pallets and platforms or in vehicles; b) Slings of tubular webbing without filling.

This Part deals with the technical requirements to minimize the hazards listed in Clause 4 which can arise during the use of slings when carried out in accordance with the instructions and specifications given by the manufacturer or authorized representative. Its clauses include terminologies and definitions.

Found what you need?

Document preview — JB/T 8521.2-2007

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword I
  • 1 Scope
  • 2 Normative References
  • 3 Terminologies and Definitions
  • 4 Hazards
  • 5 Safety Requirements
  • 6 Verification of Safety Requirements
  • 7 Marking
  • 8 Manufacturer's Certificate
  • 9 Instructions for Use
  • Appendix A (Normative) Methods of Test to Verify Safety Requirements
  • Appendix B (Normative) Information for Use and Maintenance to Be Provided by the Manufacturer
  • Appendix C (Informative) Suggested Content of Information to Be Provided by the Manufacturer with Slings
  • Appendix D (Informative) Technical Differences between this Part and EN 1492-2 2000 and the Reasons hereof
  • Bibliography

1 Scope

This Part of JB/T 8521 specifies the methods of rating and testing the roundslings (hereinafter referred to as slings) up to 100t maximum working limit load in straight lift and two-, three-, and four-leg slings(with or without fittings), made of such man-made fibres as polyamide, polyester and polypropylene.

This Part applies to general lifting services of materials and goods.

Lifting operations not covered by this Part include the lifting of persons, potentially dangerous materials such as molten metal, acids, glass sheets, fragile article, nuclear reactors and where special conditions apply.

Slings conforming to this Part are suitable for use and storage in the following temperature ranges:

a) Polyester and polyamide: -40°C~100°C;

b) Polypropylene: -40°C~80°C.

This Part does not apply to the types of sling indicated below:

a) Slings designed for securing or lashing of cargoes to each other on pallets and platforms or in vehicles;

b) Slings of tubular webbing without filling.

This Part deals with the technical requirements to minimize the hazards listed in Clause 4 which can arise during the use of slings when carried out in accordance with the instructions and specifications given by the manufacturer or authorized representative.

2 Normative References

The provisions of the following normative references become that of this Part after being quoted by this Part of JB/T 8521.For dated reference, subsequent amendments (excluding amending errors) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this Part are encouraged to study whether the latest editions of these references are applicable. For undated references, the latest editions apply.

GB 251-1995 Gray Scale for Assessing Staining(idt ISO 105/A 03: 1993)

GB/T 16825.1 Verification of Static Uniaxial Testing Machines - Part 1: Tension/compression Testing Machines - Verification and Calibration of the Force-measuring System (GB/T, 16825.1 - 2002, ISO 7500-1.1999, DT)

GB/T 16856 Safety of Machinery - Principles for Risk Assessment (eqv pr EN1050: 1994)

GB/T 19001 Quality Management Systems - Requirements (idt ISO 9001: 2000)

3 Terminologies and Definitions

For the purposes of this Part, the following terminologies and definitions apply.

3.1 Round sling

Endless flexible sling consisting of a loadbearing core of yarn, completely enclosed in a woven cover, with or without fitting (see Figure 1).

3.2 Multi-leg sling assembly

Sling assembly, consisting of two, three or four identical slings attached to a master link (See table 2).

3.3 Representative sample

Sling representative of slings of the same type, which is used for verification purposes (See 6.2 and 6.3)

Note: This may differ from the production sling in length only.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 8521.2-2007

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 8521.2-2007

$205.00