JB/T 8133.2-2013Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 2: Resistivity (English PDF)
电炭制品物理化学性能试验方法 第2部分:电阻率
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8133.2-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 8133.2-2013 is the English-translated version of 电炭制品物理化学性能试验方法 第2部分:电阻率.
JB/T 8133.2-2013 is the resistivity part of the Chinese machinery industry standard on test methods for the physical and chemical properties of electrical carbon products.
It prescribes the method used to test the resistivity of these products, and it applies to the determination of resistivity on electrical carbon products. It is a recommended standard of the machinery sector, one of the parts into which the electrical carbon test methods are divided.
The method quotes JB/T 8133.1-2013. The part replaces JB/T 8133.2-1999; its Chinese classification is K16 and its international classification 29.120.
Found what you need?
Document preview — JB/T 8133.2-2013
National Standard of the People's Republic of China
- ICS
- 29.120
- Replacing
- JB/T 8133.2-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 8133.2-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
It replaces the earlier edition JB/T 8133.2-1999, JB/T 8133.2-1995.
It is one of 51 parts of the JB/T 8133 series.
2 Scope Preview
This standard is the resistivity part of the Chinese machinery industry standard on test methods for the physical and chemical properties of electrical carbon products. It prescribes the method used to test the resistivity of these products, and it applies to the determination of resistivity on electrical carbon products. It is a recommended standard of the machinery sector, one of the parts into which the electrical carbon test methods are divided. The method quotes JB/T 8133.1-2013. The part replaces JB/T 8133.2-1999; its Chinese classification is K16 and its international classification 29.120.
JB/T 8133.2-2013 falls under ICS 29.120, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
JB/T 8133.1-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 1: Technical Instruction of Machining Sample
4 Where this standard sits
It cites one other standard, JB/T 8133.1-2013, listed in full above.
2 other standards in this catalogue cite it, among them JB/T 12253-2015, JB/T 9582-2017.
It is one part of the JB/T 8133 series, of which this catalogue holds 51 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 8133.1-1995 — Test methods for physical and chemical properties of electrocarbon products - Technical requirements for specimen machining
JB/T 8133.1-1999 — Test methods for physical and chemical properties of electrical carbon products - Technical rules for specimen preparation
JB/T 8133.1-2013 — Part 1: Technical Instruction of Machining Sample
JB/T 8133.3-1995 — Test methods for physical and chemical properties of electrocarbon products - Rockwell hardness
JB/T 8133.3-1999 — Test methods for physical and chemical properties of electrical carbon products - Rockwell hardness
JB/T 8133.3-2013 — Part 3: Rockwell Hardness
JB/T 8133.4-1995 — Test methods for physical and chemical properties of electrocarbon products - Shore hardness
JB/T 8133.4-1999 — Test methods for physical and chemical properties of electrical carbon products - Shore hardness
JB/T 8133.4-2013 — Part 4: Shore Hardness
JB/T 8133.5-1995 — Test methods for physical and chemical properties of electrocarbon products - Contact resistance at the joint between brush body and flexible connector
JB/T 8133.5-1999 — Test methods for physical and chemical properties of electrical carbon products - Contact resistance between brush body and flexible lead
JB/T 8133.5-2013 — Part 5: Connection Electrical Resistance of Brush/Flexible Connection
JB/T 8133.6-1995 — Test methods for physical and chemical properties of electrocarbon products - Pull-out force of brush flexible connectors
JB/T 8133.6-1999 — Test methods for physical and chemical properties of electrical carbon products - Pull-out force of brush flexible leads
JB/T 8133.6-2013 — Part 6: Pull Strength of Brush Connection
JB/T 8133.7-1995 — Test methods for physical and chemical properties of electrocarbon products - Flexural strength
JB/T 8133.7-1999 — Test methods for physical and chemical properties of electrical carbon products - Flexural strength
JB/T 8133.7-2013 — Part 7: Transverse Strength
JB/T 8133.8-1995 — Test methods for physical and chemical properties of electrocarbon products - Compressive strength
JB/T 8133.8-1999 — Test methods for physical and chemical properties of electrical carbon products - Compressive strength
JB/T 8133.8-2013 — Part 8: Compressive Strength
JB/T 8133.9-1995 — Test methods for physical and chemical properties of electrocarbon products - Tensile strength
JB/T 8133.9-1999 — Test methods for physical and chemical properties of electrical carbon products - Tensile strength
JB/T 8133.9-2013 — Part 9: Tensile Strength
JB/T 8133.10-1995 — Test methods for physical and chemical properties of electrocarbon products - Radial compressive strength
JB/T 8133.10-1999 — Test methods for physical and chemical properties of electrical carbon products - Radial compressive strength
JB/T 8133.10-2013 — Part 10: Radial Mechanical Strength
JB/T 8133.11-1995 — Test methods for physical and chemical properties of electrocarbon products - Cold resistance and deformation of carbon piles
JB/T 8133.11-1999 — Test methods for physical and chemical properties of electrical carbon products - Normal resistance and deformation of carbon piles
JB/T 8133.11-2013 — Part 11: Room Temperature Resistance and Deformation of Carbon Pile
JB/T 8133.12-1995 — Test methods for physical and chemical properties of electrocarbon products - Hot resistance of carbon piles
JB/T 8133.12-1999 — Test methods for physical and chemical properties of electrical carbon products - Hot resistance of carbon piles
JB/T 8133.12-2013 — Part 12: Hot Resistance of Carbon Pile
JB/T 8133.13-1995 — Test methods for physical and chemical properties of electrocarbon products - Mechanical strength of carbon piles
JB/T 8133.13-1999 — Test methods for physical and chemical properties of electrical carbon products - Mechanical strength of carbon piles
JB/T 8133.13-2013 — Part 13: Mechanical Strength of Carbon Pile
JB/T 8133.14-1995 — Test methods for physical and chemical properties of electrocarbon products - Bulk density
JB/T 8133.14-1999 — Test methods for physical and chemical properties of electrical carbon products - Bulk density
JB/T 8133.14-2013 — Part 14: Volume Density
JB/T 8133.15-1995 — Test methods for physical and chemical properties of electrocarbon products - Porosity
JB/T 8133.15-1999 — Test methods for physical and chemical properties of electrical carbon products - Porosity
JB/T 8133.15-2013 — Part 15: Porosity
JB/T 8133.16-1995 — Test methods for physical and chemical properties of electrocarbon products - Sulfur content
JB/T 8133.16-1999 — Electrical carbon products - Test methods for physical and chemical properties - Sulfur content
JB/T 8133.16-2013 — Part 16: Sulphur Content
JB/T 8133.17-1995 — Test methods for physical and chemical properties of electrocarbon products - Ash content
JB/T 8133.17-1999 — Test methods for physical and chemical properties of electrical carbon products - Ash content
JB/T 8133.17-2013 — Part 17: Ash Content
JB/T 8133.18-2017 — Test methods for physical and chemical properties of electrical carbon products - Part 18: Coefficient of linear expansion
JB/T 8133.19-2025 — Test methods for physical and chemical properties of electric carbon products - Part 19: Elastic modulus
Other editions:
JB/T 8133.2-1999 (earlier edition)
JB/T 8133.2-1995 (earlier edition)
Standards on related subjects:
NB/T 10328-2019 — Heat-shrinkable polyolefin tubing for high-voltage copper bus-bar of electric vehicles
JB/T 10442.2-2017 — Insulating paper coated with resin binder forming rhombic pattern for electrical purposes - Part 2: Methods of test
JB/T 10441.3-2004 — Crepe insulating paper for electrical purposes - Part 3: Technical requirements
7 Classification and status
International classification (ICS): 29.120
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Cited by
- GB/T 34572-2017Railway applications -- Current collection system -- Pantographs, testing methods for carbon contact strips
- JB/T 9582-2017Carbon contact strips for electric locomotives
- JB/T 12252-2015Brushes for wind turbine generators
- JB/T 12253-2015Carbon strips for pantographs of railway electric locomotives
- JB/T 12254-2015Test method for resistivity of brushes and contacts for small motors
- JB/T 2664.2-2010Carbon pile resistor columns for voltage regulators - Part 2: Columns for special voltage regulators
Similar standards
Editions of JB/T 8133.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8133.2-2013 | Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 2: Resistivity | current edition | Current |
| JB/T 8133.2-1999 | Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 2: Resistivity | previous edition | Superseded |
This page sells the current edition, JB/T 8133.2-2013. Earlier editions are listed for reference only.
How to Download JB/T 8133.2-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 8133.1-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 1: Technical Instruction of Machining Sample
JB/T 8133.3-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 3: Rockwell Hardness
JB/T 8133.1-1995 — Test methods for physical and chemical properties of electrocarbon products - Technical requirements for specimen machining
JB/T 8133.2-2013
$85.00