JB/T 12253-2015Carbon strips for pantographs of railway electric locomotives (English PDF)
铁路电力机车受电弓滑板用碳条
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12253-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 10, 2015
Implementation date
March 1, 2016
Scope
JB/T 12253-2015 is the English-translated version of 铁路电力机车受电弓滑板用碳条.
Carbon strips for the pantograph current collectors of railway locomotives are the subject of JB/T 12253-2015. The standard fixes their dimensions and technical conditions, the test methods and the inspection rules, and the requirements for marking, packaging, transport and storage of the strips, which it also calls carbon bars.
It applies to the carbon strips used on the pantograph sliding plates of railway and mine electric locomotives. Among the standards it quotes are GB/T 2828.1-2012, JB/T 7609-2006, TB/T 1842.3-2008 and several parts of JB/T 8133 in their 2013 editions. Its Chinese classification code is K16.
Found what you need?
Document preview — JB/T 12253-2015
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 12253-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 10 October 2015 and has been in force since 1 March 2016.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
Carbon strips for the pantograph current collectors of railway locomotives are the subject of JB/T 12253-2015. The standard fixes their dimensions and technical conditions, the test methods and the inspection rules, and the requirements for marking, packaging, transport and storage of the strips, which it also calls carbon bars. It applies to the carbon strips used on the pantograph sliding plates of railway and mine electric locomotives. Among the standards it quotes are GB/T 2828.1-2012, JB/T 7609-2006, TB/T 1842.3-2008 and several parts of JB/T 8133 in their 2013 editions. Its Chinese classification code is K16.
JB/T 12253-2015 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 2828.1-2012 — Plain bearings -- Quality characteristics -- Statistical process control (SPC)
JB/T 7609-2006 — Test method for impact strength of carbon-graphite materials
JB/T 8133.2-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 2: Resistivity
JB/T 8133.4-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 4: Shore Hardness
JB/T 8133.7-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 7: Transverse Strength
JB/T 8133.8-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 8: Compressive Strength
JB/T 8133.14-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 14: Volume Density
TB/T 1842.3-2008 — Contact strips electric locomotive pantograph. Part 3: Carbon contact strips
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 10442.2-2017 — Insulating paper coated with resin binder forming rhombic pattern for electrical purposes - Part 2: Methods of test
GB/T 11026.1-2016 — Electrical insulating materials -- Thermal endurance properties -- Part 1: Ageing procedures and evaluation of test results
JB/T 10441.3-2004 — Crepe insulating paper for electrical purposes - Part 3: Technical requirements
JB/T 12254-2015 — Test method for resistivity of brushes and contacts for small motors
JB/T 12252-2015 — Brushes for wind turbine generators
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2828.1-2012Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- JB/T 7609-2006Test method for impact strength of carbon-graphite materials
- JB/T 8133.2-2013Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 2: Resistivity
- JB/T 8133.4-2013Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 4: Shore Hardness
- JB/T 8133.7-2013Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 7: Transverse Strength
- JB/T 8133.8-2013Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 8: Compressive Strength
Similar standards
How to Download JB/T 12253-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2828.1-2012 — Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
JB/T 7609-2006 — Test method for impact strength of carbon-graphite materials
JB/T 8133.14-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 14: Volume Density
JB/T 12253-2015
$85.00