JB/T 12254-2015Test method for resistivity of brushes and contacts for small motors (English PDF)
微电机用电刷及触点电阻率试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12254-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 10, 2015
Implementation date
March 1, 2016
Scope
JB/T 12254-2015 is the English-translated version of 微电机用电刷及触点电阻率试验方法.
JB/T 12254-2015 is the Chinese machinery industry standard that lays down a test method for the resistivity of brushes and contacts used with micro motors. It describes the test equipment, the test conditions and the test procedure, and it sets out how the result is calculated.
Measuring the resistivity of micro motor brushes and contacts is the use it is written for. It quotes JB/T 8133.1 and JB/T 8133.2. The Ministry of Industry and Information Technology issued the document, which carries Chinese classification K16.
Found what you need?
Document preview — JB/T 12254-2015
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 12254-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 10 October 2015 and has been in force since 1 March 2016.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese machinery industry standard that lays down a test method for the resistivity of brushes and contacts used with micro motors. It describes the test equipment, the test conditions and the test procedure, and it sets out how the result is calculated. Measuring the resistivity of micro motor brushes and contacts is the use it is written for. It quotes JB/T 8133.1 and JB/T 8133.2. The Ministry of Industry and Information Technology issued the document, which carries Chinese classification K16.
JB/T 12254-2015 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
JB/T 8133.1
JB/T 8133.2
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 10442.2-2017 — Insulating paper coated with resin binder forming rhombic pattern for electrical purposes - Part 2: Methods of test
GB/T 11026.1-2016 — Electrical insulating materials -- Thermal endurance properties -- Part 1: Ageing procedures and evaluation of test results
JB/T 10441.3-2004 — Crepe insulating paper for electrical purposes - Part 3: Technical requirements
JB/T 12253-2015 — Carbon strips for pantographs of railway electric locomotives
JB/T 12252-2015 — Brushes for wind turbine generators
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download JB/T 12254-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 8133.1-1995 — Test methods for physical and chemical properties of electrocarbon products - Technical requirements for specimen machining
JB/T 8133.1-1999 — Test methods for physical and chemical properties of electrical carbon products - Technical rules for specimen preparation
JB/T 8133.1-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 1: Technical Instruction of Machining Sample
JB/T 12254-2015
$105.00