JB/T 7780.3-2008Methods for measuring mechanical and physical properties of wires for rivet contacts - Part 3: Determination of resistivity (English PDF)
铆钉型触头用线材机械物理性能试验方法 第3部分:电阻率测量
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7780.3-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 1, 2008
Implementation date
July 1, 2008
Scope
JB/T 7780.3-2008 is the English-translated version of 铆钉型触头用线材机械物理性能试验方法 第3部分:电阻率测量.
JB/T 7780.3-2008 is the Chinese machinery industry standard covering methods for measuring mechanical and physical properties of wires for rivet contacts, Part 3: Determination of resistivity.
It was issued on 1 February 2008 and has been in force since 1 July 2008, replacing JB/T 7780.3-1995. The document is under the responsibility of the Ministry of Industry and Information Technology.
This page is published from the official record of the 2008 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 7780.3-2008
National Standard of the People's Republic of China
- Replacing
- JB/T 7780.3-1995
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 7780.3-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 February 2008 and has been in force since 1 July 2008.
It replaces the earlier edition JB/T 7780.3-1995.
It is one of 9 parts of the JB/T 7780 series.
2 Scope Preview
JB/T 7780.3-2008 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 7780.1-1995 — Wires for rivet contacts - Test methods for mechanical and physical properties - Measurement method for density
JB/T 7780.1-2008 — Part 1: Determination of density
JB/T 7780.2-1995 — Wires for rivet contacts - Test methods for mechanical and physical properties - Measurement method for hardness
JB/T 7780.2-2008 — Part 2: Determination of hardness
JB/T 7780.4-1995 — Wires for rivet contacts - Test methods for mechanical and physical properties - Tensile test method
JB/T 7780.4-2008 — Part 4: Tensile test
JB/T 7780.5-1995 — Test methods for mechanical and physical properties of wires for rivet contacts - Torsion test method for wires for rivet contacts
JB/T 7780.5-2008 — Part 5: Torsion test
Other editions:
JB/T 7780.3-1995 (earlier edition)
Standards on related subjects:
JB/T 8987-2017 — Technical requirements for silver-copper alloy wires (strips) for commutators
GB/T 3217-2013 — Permanent magnet (magnetically hard) materials -- Methods of measurement of magnetic properties
GB/T 24270-2009 — Method of measurement of temperature coefficient of magnetic properties of permanent magnetic materials
5 Classification and status
Chinese Standard Classification (CCS): K 14
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of JB/T 7780.3
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7780.3-2008 | Methods for measuring mechanical and physical properties of wires for rivet contacts - Part 3: Determination of resistivity | current edition | Current |
| JB/T 7780.3-1995 | Methods for measuring mechanical and physical properties of wires for rivet contacts - Part 3: Determination of resistivity | previous edition | Superseded |
This page sells the current edition, JB/T 7780.3-2008. Earlier editions are listed for reference only.
How to Download JB/T 7780.3-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 7780.4-2008 — Methods for measuring mechanical and physical properties of wires for rivet contacts - Part 4: Tensile test
JB/T 7780.2-1995 — Wires for rivet contacts - Test methods for mechanical and physical properties - Measurement method for hardness
JB/T 7780.4-1995 — Wires for rivet contacts - Test methods for mechanical and physical properties - Tensile test method
JB/T 7780.3-2008
$55.00