Valid

JB/T 7780.4-2008Methods for measuring mechanical and physical properties of wires for rivet contacts - Part 4: Tensile test (English PDF)

铆钉型触头用线材机械物理性能试验方法 第4部分:拉抻试验

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 7780.4-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 1, 2008

Implementation date

July 1, 2008

Scope

JB/T 7780.4-2008 is the English-translated version of 铆钉型触头用线材机械物理性能试验方法 第4部分:拉抻试验.

JB/T 7780.4-2008 is the Chinese machinery industry standard covering methods for measuring mechanical and physical properties of wires for rivet contacts, Part 4: Tensile test.

It was issued on 1 February 2008 and has been in force since 1 July 2008, replacing JB/T 7780.4-1995. The document is under the responsibility of the Ministry of Industry and Information Technology.

This page is published from the official record of the 2008 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 7780.4-2008

National Standard of the People's Republic of China

Replacing
JB/T 7780.4-1995

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 7780.4-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 February 2008 and has been in force since 1 July 2008.

It replaces the earlier edition JB/T 7780.4-1995.

It is one of 9 parts of the JB/T 7780 series.

2 Scope Preview

JB/T 7780.4-2008 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other parts of this standard:

JB/T 7780.1-1995 — Wires for rivet contacts - Test methods for mechanical and physical properties - Measurement method for density

JB/T 7780.1-2008 — Part 1: Determination of density

JB/T 7780.2-1995 — Wires for rivet contacts - Test methods for mechanical and physical properties - Measurement method for hardness

JB/T 7780.2-2008 — Part 2: Determination of hardness

JB/T 7780.3-1995 — Wires for rivet contacts - Test methods for mechanical and physical properties - Measurement method for resistivity

JB/T 7780.3-2008 — Part 3: Determination of resistivity

JB/T 7780.5-1995 — Test methods for mechanical and physical properties of wires for rivet contacts - Torsion test method for wires for rivet contacts

JB/T 7780.5-2008 — Part 5: Torsion test

Other editions:

JB/T 7780.4-1995 (earlier edition)

Standards on related subjects:

JB/T 8987-2017 — Technical requirements for silver-copper alloy wires (strips) for commutators

GB/T 3217-2013 — Permanent magnet (magnetically hard) materials -- Methods of measurement of magnetic properties

GB/T 24270-2009 — Method of measurement of temperature coefficient of magnetic properties of permanent magnetic materials

JB/T 7774.1-2008 — Test methods for chemical analysis of silver-zinc oxide electric contact material - Part 1: Determination of zinc content

5 Classification and status

Chinese Standard Classification (CCS): K 14

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of JB/T 7780.4

EditionTitleRevisionStatus
JB/T 7780.4-2008Methods for measuring mechanical and physical properties of wires for rivet contacts - Part 4: Tensile testcurrent editionCurrent
JB/T 7780.4-1995Methods for measuring mechanical and physical properties of wires for rivet contacts - Part 4: Tensile testprevious editionSuperseded

This page sells the current edition, JB/T 7780.4-2008. Earlier editions are listed for reference only.

How to Download JB/T 7780.4-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 7780.4-2008

$105.00