JB/T 7780.2-1995Wires for rivet contacts - Test methods for mechanical and physical properties - Measurement method for hardness (English PDF)
铆钉触头用线材机械物理性能试验方法 铆钉触头用线材硬度测量方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7780.2-1995 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 1, 1995
Implementation date
January 1, 1995
Scope
JB/T 7780.2-1995 is the English-translated version of 铆钉触头用线材机械物理性能试验方法 铆钉触头用线材硬度测量方法.
JB/T 7780.2-1995 is the Chinese machinery industry standard covering wires for rivet contacts - Test methods for mechanical and physical properties - Measurement method for hardness.
It was issued on 1 January 1995 and has been in force since 1 January 1995, as a first edition. The document is under the responsibility of the Ministry of Industry and Information Technology.
This page is published from the official record of the 1995 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 7780.2-1995
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 7780.2-1995 is issued by Ministry of Industry and Information Technology of the People's Republic of China.
It is one of 9 parts of the JB/T 7780 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 7780.2-1995 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 7780.1-1995 — Wires for rivet contacts - Test methods for mechanical and physical properties - Measurement method for density
JB/T 7780.1-2008 — Methods for measuring mechanical and physical properties of wires for rivet contacts - Part 1: Determination of density
JB/T 7780.3-1995 — Wires for rivet contacts - Test methods for mechanical and physical properties - Measurement method for resistivity
JB/T 7780.3-2008 — Methods for measuring mechanical and physical properties of wires for rivet contacts - Part 3: Determination of resistivity
JB/T 7780.4-1995 — Tensile test method
JB/T 7780.4-2008 — Methods for measuring mechanical and physical properties of wires for rivet contacts - Part 4: Tensile test
JB/T 7780.5-1995 — Test methods for mechanical and physical properties of wires for rivet contacts - Torsion test method for wires for rivet contacts
JB/T 7780.5-2008 — Methods for measuring mechanical and physical properties of wires for rivet contacts - Part 5: Torsion test
Other editions:
JB/T 7780.2-2008 (later edition)
5 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 7780.2-1995
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 7780.3-2008 — Methods for measuring mechanical and physical properties of wires for rivet contacts - Part 3: Determination of resistivity
JB/T 7780.1-1995 — Wires for rivet contacts - Test methods for mechanical and physical properties - Measurement method for density
JB/T 7780.3-1995 — Wires for rivet contacts - Test methods for mechanical and physical properties - Measurement method for resistivity
JB/T 7780.2-1995
$169.00