Valid

JB/T 8133.1-1999Test methods for physical and chemical properties of electrical carbon products - Technical rules for specimen preparation (English PDF)

电炭制品物理化学性能试验方法 试样加工技术规定

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 8133.1-1999 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

August 6, 1999

Implementation date

January 1, 2000

Scope

JB/T 8133.1-1999 is the English-translated version of 电炭制品物理化学性能试验方法 试样加工技术规定.

JB/T 8133.1-1999 is the Chinese machinery industry standard covering test methods for physical and chemical properties of electrical carbon products - Technical rules for specimen preparation.

It was issued on 6 August 1999 and has been in force since 1 January 2000, as a first edition. The document is under the responsibility of the Ministry of Industry and Information Technology.

This page is published from the official record of the 1999 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 8133.1-1999

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 8133.1-1999 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 August 1999.

It replaces the earlier edition JB/T 8133.1-1995.

It is one of 51 parts of the JB/T 8133 series.

2 Scope Preview

JB/T 8133.1-1999 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 Where this standard sits

2 other standards in this catalogue cite it, among them JB/T 4220-2011, JB/T 6773-2011.

It is one part of the JB/T 8133 series, of which this catalogue holds 51 parts.

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other parts of this standard:

JB/T 8133.2-1995 — Test methods for physical and chemical properties of electrocarbon products - Resistivity

JB/T 8133.2-1999 — Resistivity

JB/T 8133.2-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 2: Resistivity

JB/T 8133.3-1995 — Test methods for physical and chemical properties of electrocarbon products - Rockwell hardness

JB/T 8133.3-1999 — Rockwell hardness

JB/T 8133.3-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 3: Rockwell Hardness

JB/T 8133.4-1995 — Test methods for physical and chemical properties of electrocarbon products - Shore hardness

JB/T 8133.4-1999 — Shore hardness

JB/T 8133.4-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 4: Shore Hardness

JB/T 8133.5-1995 — Test methods for physical and chemical properties of electrocarbon products - Contact resistance at the joint between brush body and flexible connector

JB/T 8133.5-1999 — Contact resistance between brush body and flexible lead

JB/T 8133.5-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 5: Connection Electrical Resistance of Brush/Flexible Connection

JB/T 8133.6-1995 — Test methods for physical and chemical properties of electrocarbon products - Pull-out force of brush flexible connectors

JB/T 8133.6-1999 — Pull-out force of brush flexible leads

JB/T 8133.6-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 6: Pull Strength of Brush Connection

JB/T 8133.7-1995 — Test methods for physical and chemical properties of electrocarbon products - Flexural strength

JB/T 8133.7-1999 — Flexural strength

JB/T 8133.7-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 7: Transverse Strength

JB/T 8133.8-1995 — Test methods for physical and chemical properties of electrocarbon products - Compressive strength

JB/T 8133.8-1999 — Compressive strength

JB/T 8133.8-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 8: Compressive Strength

JB/T 8133.9-1995 — Test methods for physical and chemical properties of electrocarbon products - Tensile strength

JB/T 8133.9-1999 — Tensile strength

JB/T 8133.9-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 9: Tensile Strength

JB/T 8133.10-1995 — Test methods for physical and chemical properties of electrocarbon products - Radial compressive strength

JB/T 8133.10-1999 — Radial compressive strength

JB/T 8133.10-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 10: Radial Mechanical Strength

JB/T 8133.11-1995 — Test methods for physical and chemical properties of electrocarbon products - Cold resistance and deformation of carbon piles

JB/T 8133.11-1999 — Normal resistance and deformation of carbon piles

JB/T 8133.11-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 11: Room Temperature Resistance and Deformation of Carbon Pile

JB/T 8133.12-1995 — Test methods for physical and chemical properties of electrocarbon products - Hot resistance of carbon piles

JB/T 8133.12-1999 — Hot resistance of carbon piles

JB/T 8133.12-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 12: Hot Resistance of Carbon Pile

JB/T 8133.13-1995 — Test methods for physical and chemical properties of electrocarbon products - Mechanical strength of carbon piles

JB/T 8133.13-1999 — Mechanical strength of carbon piles

JB/T 8133.13-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 13: Mechanical Strength of Carbon Pile

JB/T 8133.14-1995 — Test methods for physical and chemical properties of electrocarbon products - Bulk density

JB/T 8133.14-1999 — Bulk density

JB/T 8133.14-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 14: Volume Density

JB/T 8133.15-1995 — Test methods for physical and chemical properties of electrocarbon products - Porosity

JB/T 8133.15-1999 — Porosity

JB/T 8133.15-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 15: Porosity

JB/T 8133.16-1995 — Test methods for physical and chemical properties of electrocarbon products - Sulfur content

JB/T 8133.16-1999 — Electrical carbon products - Test methods for physical and chemical properties - Sulfur content

JB/T 8133.16-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 16: Sulphur Content

JB/T 8133.17-1995 — Test methods for physical and chemical properties of electrocarbon products - Ash content

JB/T 8133.17-1999 — Ash content

JB/T 8133.17-2013 — Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 17: Ash Content

JB/T 8133.18-2017 — Part 18: Coefficient of linear expansion

JB/T 8133.19-2025 — Test methods for physical and chemical properties of electric carbon products - Part 19: Elastic modulus

Other editions:

JB/T 8133.1-2013 (later edition)

JB/T 8133.1-1995 (earlier edition)

Standards on related subjects:

NB/T 10328-2019 — Heat-shrinkable polyolefin tubing for high-voltage copper bus-bar of electric vehicles

JB/T 10442.2-2017 — Insulating paper coated with resin binder forming rhombic pattern for electrical purposes - Part 2: Methods of test

JB/T 10441.3-2004 — Crepe insulating paper for electrical purposes - Part 3: Technical requirements

6 Classification and status

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 8133.1-1999

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 8133.1-1999

$25.00