JB/T 6773-2011Resistivity test method for metal-graphite products (English PDF)
金属石墨制品的电阻率试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6773-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
April 1, 2012
Scope
JB/T 6773-2011 is the English-translated version of 金属石墨制品的电阻率试验方法.
JB/T 6773-2011 is a recommended Chinese machinery industry standard that establishes how the resistivity of metal graphite products is measured. It defines the principle of the measurement, the test equipment, the samples, the test conditions, the test procedure and the calculation of the results.
It applies to the determination of resistivity on silver graphite brushes, copper graphite brushes and other metal graphite products. The standard it quotes is JB/T 8133.1-1999.
The standard replaces the earlier edition of the same number, JB/T 6773-1993, carries the Chinese classification K16 and the international classification 29.120, and was issued by the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 6773-2011
National Standard of the People's Republic of China
- ICS
- 29.120
- Replacing
- JB/T 6773-1993
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 6773-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 April 2012.
It replaces the earlier edition JB/T 6773-1993.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard that establishes how the resistivity of metal graphite products is measured. It defines the principle of the measurement, the test equipment, the samples, the test conditions, the test procedure and the calculation of the results. It applies to the determination of resistivity on silver graphite brushes, copper graphite brushes and other metal graphite products. The standard it quotes is JB/T 8133.1-1999. The standard replaces the earlier edition of the same number, JB/T 6773-1993, carries the Chinese classification K16 and the international classification 29.120, and was issued by the Ministry of Industry and Information Technology.
JB/T 6773-2011 falls under ICS 29.120, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
JB/T 8133.1-1999 — Test methods for physical and chemical properties of electrical carbon products - Technical rules for specimen preparation
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 6773-1993 (earlier edition)
Standards on related subjects:
GB/T 5591.2-2017 — Combined flexible materials for electrical insulation -- Part 2: Methods of test
JB/T 10442.2-2017 — Insulating paper coated with resin binder forming rhombic pattern for electrical purposes - Part 2: Methods of test
JB/T 10441.3-2004 — Crepe insulating paper for electrical purposes - Part 3: Technical requirements
JB/T 8133.19-2025 — Test methods for physical and chemical properties of electric carbon products - Part 19: Elastic modulus
JB/T 4003-2025 — Motor brushes
JB/T 6774-2017 — Test method for fixed carbon in coal tar pitch
6 Classification and status
International classification (ICS): 29.120
Chinese Standard Classification (CCS): K 16
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 6773
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6773-2011 | Resistivity test method for metal-graphite products | current edition | Current |
| JB/T 6773-1993 | Resistivity test method for metal-graphite products | previous edition | Superseded |
This page sells the current edition, JB/T 6773-2011. Earlier editions are listed for reference only.
How to Download JB/T 6773-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 8133.1-1999 — Test methods for physical and chemical properties of electrical carbon products - Technical rules for specimen preparation
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 6773-2011
$149.00