JB/T 12252-2015Brushes for wind turbine generators (English PDF)
风力发电机用电刷
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12252-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 10, 2015
Implementation date
March 1, 2016
Scope
JB/T 12252-2015 is the English-translated version of 风力发电机用电刷.
JB/T 12252-2015 is the Chinese machinery industry standard for the brushes fitted to wind driven generators. It sets out the product classification and the recommended conditions of use, the requirements, the test methods and the inspection rules, and it closes with marking, packaging, transport and storage.
Brushes for wind power generators are its field of application. Among the standards it quotes are GB/T 1031, GB/T 2828.1-2012, GB/T 12970.4, JB/T 2623-2006 and many parts of JB/T 8133.
The Ministry of Industry and Information Technology issued it, under Chinese classification K16.
Found what you need?
Document preview — JB/T 12252-2015
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 12252-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 10 October 2015 and has been in force since 1 March 2016.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese machinery industry standard for the brushes fitted to wind driven generators. It sets out the product classification and the recommended conditions of use, the requirements, the test methods and the inspection rules, and it closes with marking, packaging, transport and storage. Brushes for wind power generators are its field of application. Among the standards it quotes are GB/T 1031, GB/T 2828.1-2012, GB/T 12970.4, JB/T 2623-2006 and many parts of JB/T 8133. The Ministry of Industry and Information Technology issued it, under Chinese classification K16.
JB/T 12252-2015 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 1031
GB/T 2828.1-2012 — Plain bearings -- Quality characteristics -- Statistical process control (SPC)
GB/T 12970.4
JB/T 2623-2006 — Dimensions and structural types of brushes for electrical machines
JB/T 8133.1
JB/T 8133.2
JB/T 8133.3
JB/T 8133.4
JB/T 8133.5
JB/T 8133.6
JB/T 8133.7
JB/T 8133.8
JB/T 8133.9
JB/T 8133.10
JB/T 8133.11
JB/T 8133.12
JB/T 8133.13
JB/T 8133.14
JB/T 8133.15
JB/T 8133.16
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 10442.2-2017 — Insulating paper coated with resin binder forming rhombic pattern for electrical purposes - Part 2: Methods of test
GB/T 11026.1-2016 — Electrical insulating materials -- Thermal endurance properties -- Part 1: Ageing procedures and evaluation of test results
JB/T 10441.3-2004 — Crepe insulating paper for electrical purposes - Part 3: Technical requirements
JB/T 12254-2015 — Test method for resistivity of brushes and contacts for small motors
JB/T 12253-2015 — Carbon strips for pantographs of railway electric locomotives
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1031Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
- GB/T 2828.1-2012Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 12970.4Flexilbe copper stranded conductors for electrical purposes - Part 4: Copper wires for electric brush
- JB/T 2623-2006Dimensions and structural types of brushes for electrical machines
- JB/T 8133.1Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 1: Technical Instruction of Machining Sample
- JB/T 8133.2Test Method for Physical-chemical Properties of Electrical Carbon Product - Part 2: Resistivity
Similar standards
How to Download JB/T 12252-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1031-1995 — Surface ronghness parameters and their values
GB/T 1031-2009 — Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
GB/T 12970.4-1991 — Flexible copper stranded conductors for electrical purposes--Part 4: Copper brush wires
JB/T 12252-2015
$145.00