Valid

JB/T 1267-2014Rotor Forgings for 50MW to 200MW Turbine Generators - Technical Specification (English PDF)

50MW～200MW汽轮发电机转子锻件技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 1267-2014 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 6, 2014

Implementation date

October 1, 2014

Scope

JB/T 1267-2014 is the English-translated version of 50MW～200MW汽轮发电机转子锻件技术条件.

JB/T 1267-2014 is the Chinese standard "Rotor Forgings for 50MW to 200MW Turbine Generators - Technical Specification".

Its scope clause reads: This standard specifies the order requirements, manufacturing process, technical specifications, inspection rules, test methods, acceptance and quality certificate, marking and packaging of vacuum-treated alloy steel forgings for rotors for 50 MW to 200 MW turbine generators.

This standard is applicable to the order, manufacturing and inspection of vacuum-treated alloy steel forgings for rotors for 50 MW to 200 MW turbine generators. Its clauses include order requirements; manufacturing process.

Found what you need?

Document preview — JB/T 1267-2014

National Standard of the People's Republic of China

Replacing: JB/T 1267-2002

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Foreword I
1 Scope
2 Normative References
3 Order Requirements
4 Manufacturing process
4.1 Smelting and pouring
4.2 Forging
4.3 Fillet
4.4 Heat treatment
4.5 Machining
5 Technical Specifications
5.1 Chemical compositions
5.2 Mechanical property
5.3 Residual stress
5.5 Grain size
5.6 Hardness
5.7 Non-destructive testing
5.8 Dimensions, tolerances and surface roughness
6 Inspection Rules and Test Methods
6.1 Chemical composition analysis
6.2 Mechanical properties test
6.3 Residual stress determination
6.4 Determination of magnetic property
6.5 Determination of grain size
6.6 Hardness inspection
6.7 Non-destructive testing
6.8 Retest and re-heat treatment
7 Acceptance and Quality Certificate
8 Marking and Packaging
Table 1 Chemical compositions
Table 2 Permissible deviation of chemical composition of finished products
Table 3 Mechanical properties
Table 4 Equivalent diameter and number of single and dispersed defects

1 Scope

This standard specifies the order requirements, manufacturing process, technical specifications, inspection rules, test methods, acceptance and quality certificate, marking and packaging of vacuum-treated alloy steel forgings for rotors for 50 MW to 200 MW turbine generators.

This standard is applicable to the order, manufacturing and inspection of vacuum-treated alloy steel forgings for rotors for 50 MW to 200 MW turbine generators.

2 Normative References

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 223 (all parts) Methods for Chemical Analysis of Iron, Steel and Alloy

GB/T 228.1 Metallic Materials — Tensile Testing — Part 1: Method of Test at Room Temperature

GB/T 229 Metallic Materials — Charpy Pendulum Impact Test Method

GB/T 231.1 Metallic Materials — Brinell Hardness Test — Part 1: Test Method

GB/T 4336 Standard Test Method for Spark Discharge Atomic Emission Spectrometric Analysis of Carbon and Low - Alloy Steel (Routine Method)

GB/T 6394 Determination of Estimating the Average Grain Size of Metal

JB/T 1581 Ultrasonic Testing Method for Rotor and Shaft Forgings of Steam Turbines and Turbine Generators

JB/T 8468 Magnetic Particle Testing for Steel Forgings

JB/T 8888 Test Method for Measuring Residual Stresses by the Ring-core Method in Rotor Forgings for Turbine and Generator

ASTM A 341/A 341 M Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods

ASTM A 370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

3 Order Requirements

3.1

The purchaser shall indicate the reference standard, forging grade, material designation, corresponding technical specifications and inspection items, as well as other additional information in the order contract or technical agreement.

On the drawing, forging grade and material designation shall be marked as follows:

Steel designation

Forging grade × No. of this standard 3.2 The purchaser shall provide the order drawing of forgings with marked sampling position for mechanical properties test and rough machining size, and if necessary, the finishing size shall be indicated.

4 Manufacturing process

4.1 Smelting and pouring

4.1.1

Steel used for forgings shall be smelted in basic electric furnace. As agreed by the purchaser, other smelting methods ensuring the quality may also be adopted.

4.1.2

Before or during ingot casting, molten steel shall be degassed by vacuum. Generally, in the process of vacuum treatment, the ultimate pressure of the vacuum system shall be less than 133Pa.

4.2 Forging

4.2.1

The upper and lower ends of steel ingot shall have adequate cut-off quantity so as to ensure that the forging is free from shrinkage cavity and excessive segregation.

4.2.2

Forgings shall be forged on a forging press with sufficient capacity so that the whole section of the forgings can be thoroughly forged. Maintain the superposition of the axle of forgings and the axial direction centerline of steel ingots as possible. The better quality end of the ingot shall be used as the forgings for turbine end.

4.3 Fillet

At each manufacturing stage, the corresponding fillet shall be retained at the step transitions where the diameter of the forgings changes.

4.4 Heat treatment

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Cited by

JB/T 4359-2014Axial Compressor for General Purpose

Similar standards

JB/T 7026-2018|JB/T 8708-2014|GB/T 11348.2-2012|JB/T 1269-2014|JB/T 7030-2014|JB/T 7025-2018

Editions of JB/T 1267

Edition	Title	Revision	Status
JB/T 1267-2014	Rotor Forgings for 50MW to 200MW Turbine Generators - Technical Specification	current edition	Current
JB/T 1267-2002	Rotor Forgings for 50MW to 200MW Turbine Generators - Technical Specification	previous edition	Superseded

This page sells the current edition, JB/T 1267-2014. Earlier editions are listed for reference only.

How to Download JB/T 1267-2014

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.