JB/T 7489-2020Instruments - Rework soldering process specification for printed circuit board assemblies (English PDF)
仪器仪表印制电路板组装件修焊工艺规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7489-2020 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 1, 2020
Implementation date
July 1, 2021
Scope
JB/T 7489-2020 is the English-translated version of 仪器仪表印制电路板组装件修焊工艺规范.
JB/T 7489-2020 is a recommended Chinese machinery industry standard on the rework soldering of printed circuit board assemblies in instruments and meters. It specifies the process conditions for repair soldering work and defines its scope and its methods.
The standard applies to the repair soldering of printed circuit board assemblies used in instrumentation, and boards from other industries may be worked on by reference to it.
It is classified N06 and quotes GB/T 2423.28-2005, GB/T 3131-2001, GB/T 7157 and GB 50169-2016. It took the place of JB/T 7489-1994, the earlier repair welding process specification for instrument printed board assemblies. Issued on 1 January 2020, it has applied since 1 July 2021.
Found what you need?
Document preview — JB/T 7489-2020
National Standard of the People's Republic of China
- Replacing
- JB/T 7489-1994
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 7489-2020 is issued by Ministry of Industry and Information Technology of the People's Republic of China.
It replaces the earlier edition JB/T 7489-1994.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard on the rework soldering of printed circuit board assemblies in instruments and meters. It specifies the process conditions for repair soldering work and defines its scope and its methods. The standard applies to the repair soldering of printed circuit board assemblies used in instrumentation, and boards from other industries may be worked on by reference to it. It is classified N06 and quotes GB/T 2423.28-2005, GB/T 3131-2001, GB/T 7157 and GB 50169-2016. It took the place of JB/T 7489-1994, the earlier repair welding process specification for instrument printed board assemblies. Issued on 1 January 2020, it has applied since 1 July 2021.
JB/T 7489-2020 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 2423.28-2005 — Environmental testing for electric and electronic products - Part 2: Test methods - Test T: Soldering
GB/T 3131-2001 — Tin-lead solder
GB/T 7157
GB 50169-2016 — Code for construction and acceptance of grounding connection electric equipment installation engineering
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 7489-1994 (earlier edition)
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2423.28-2005Environmental testing for electric and electronic products - Part 2: Test methods - Test T: Soldering
- GB/T 3131-2001Tin-lead solder
- GB/T 7157Electric soldering irons and heating guns
- GB 50169-2016Code for construction and acceptance of grounding connection electric equipment installation engineering
Similar standards
Editions of JB/T 7489
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7489-2020 | Instruments - Rework soldering process specification for printed circuit board assemblies | current edition | Current |
| JB/T 7489-1994 | Instruments - Rework soldering process specification for printed circuit board assemblies | previous edition | Superseded |
This page sells the current edition, JB/T 7489-2020. Earlier editions are listed for reference only.
How to Download JB/T 7489-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 50169-2016 — Code for construction and acceptance of grounding connection electric equipment installation engineering
GB/T 2423.28-2005 — Environmental testing for electric and electronic products - Part 2: Test methods - Test T: Soldering
GB/T 3131-2001 — Tin-lead solder
JB/T 7489-2020
$165.00