JB/T 6069-2013Filled polytetrafluoroethylene soft strips for facing of rubber-plastic composite seals of sluice gates (English PDF)
水闸橡塑复合密封件覆面用填充聚四氟乙烯软带
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6069-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 6069-2013 is the English-translated version of 水闸橡塑复合密封件覆面用填充聚四氟乙烯软带.
JB/T 6069-2013 is a recommended Chinese machinery industry standard for the filled polytetrafluoroethylene soft strip used to face the rubber-plastic composite seals of sluice gates.
For this soft strip it lays down the technical requirements, the test methods and the inspection rules, and it goes on to marking, packaging, storage and transport.
The material is called the soft strip throughout the text. It quotes GB/T 1040.2, GB/T 3398.1, GB/T 3960, GB/T 15254 and GB/T 27025. The standard supersedes JB/T 6069-1992.
It is filed under Chinese classification G31 and international classification 83.140.99.
Found what you need?
Document preview — JB/T 6069-2013
National Standard of the People's Republic of China
- ICS
- 83.140.99
- Replacing
- JB/T 6069-1992
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 6069-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.
It replaces the earlier edition JB/T 6069-1992.
2 Scope
This standard is a recommended Chinese machinery industry standard for the filled polytetrafluoroethylene soft strip used to face the rubber-plastic composite seals of sluice gates. For this soft strip it lays down the technical requirements, the test methods and the inspection rules, and it goes on to marking, packaging, storage and transport. The material is called the soft strip throughout the text. It quotes GB/T 1040.2, GB/T 3398.1, GB/T 3960, GB/T 15254 and GB/T 27025. The standard supersedes JB/T 6069-1992. It is filed under Chinese classification G31 and international classification 83.140.99.
3 Normative references
JB/T 6069-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 1040.2
GB/T 3398.1
GB/T 3960
GB/T 15254
GB/T 27025
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 6069-1992 (earlier edition)
6 Classification and status
International classification (ICS): 83.140.99
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1040.2Plastics – Determination of Tensile Properties – Part 2: Test Conditions for Moulding and Extrusion Plastics
- GB/T 3398.1Plastics -- Determination of hardness -- Part 1: Ball indentation method
- GB/T 3960Plastics—Test method for friction and wear by sliding
- GB/T 15254Rubber, vulcanized - Determination of adhesion to metal - 180° peel test method
- GB/T 27025General requirements for the competence of testing and calibration laboratories
Similar standards
Editions of JB/T 6069
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6069-2013 | Filled polytetrafluoroethylene soft strips for facing of rubber-plastic composite seals of sluice gates | current edition | Current |
| JB/T 6069-1992 | Filled polytetrafluoroethylene soft strips for facing of rubber-plastic composite seals of sluice gates | previous edition | Superseded |
This page sells the current edition, JB/T 6069-2013. Earlier editions are listed for reference only.
How to Download JB/T 6069-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1040.2-2022 — Plastics – Determination of Tensile Properties – Part 2: Test Conditions for Moulding and Extrusion Plastics
GB/T 15254-2014 — Rubber, vulcanized - Determination of adhesion to metal - 180° peel test method
GB/T 27025-2019 — General requirements for the competence of testing and calibration laboratories
Secure payment via Stripe
Payments accepted
JB/T 6069-2013
$139.00