Valid

HG/T 3096-2011Rubber seals for sluice gates (English PDF)

水闸橡胶密封件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3096-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 20, 2011

Implementation date

July 1, 2012

Scope

HG/T 3096-2011 is the English-translated version of 水闸橡胶密封件.

HG/T 3096-2011 is the Chinese chemical industry standard for rubber seals used on sluice gates. It fixes the requirements for plain rubber seals and for composite rubber seals, together with the test methods, the inspection rules and the provisions on signs, packaging, transport and storage.

It applies to the rubber and composite rubber seals fitted to gates in water conservancy and hydropower works. The tests it relies on include GB/T 528, GB/T 531.1, GB/T 532, GB/T 533, GB/T 1682, GB/T 1690, GB/T 3512, GB/T 7757 and GB/T 7759, with HG/T 2729, HG/T 3090 and JB/T 6069.

It supersedes HG/T 3096-2001. Issued on 20 December 2011, it has applied since 1 July 2012.

Found what you need?

Document preview — HG/T 3096-2011

National Standard of the People's Republic of China

ICS
83.140.50
Replacing
HG/T 3096-2001

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 3.1 Category A
  • 3.2 Category B
  • 4 Classification and designation
  • 4.1 General
  • 4.2 Character group 1
  • 4.3 Character group 2
  • 4.4 Character group 3
  • 4.5 Character group 4
  • 4.6 Designation example
  • 5 Test Methods
  • 5.1 Appearance requirements
  • 5.2 Technical requirements
  • 5.3 Environmental requirements
  • 6.1 Test conditions
  • 6.2 Test substrate
  • 6.3 Apparatus
  • 6.4 Appearance
  • 6.5 Coating property
  • 6.6 Shear elongation
  • 6.7 Tensile shear strength
  • 6.8 Tensile bond strength
  • 6.9 Free formaldehyde
  • 7 Inspection rules
  • 7.1 Inspection
  • 7.2 Batching
  • 7.3 Sampling
  • 7.4 Judgment of inspection results
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging
  • 8.3 Transportation
  • 8.4 Storage
  • 9 Packaging, transportation and storage

1 Foreword

HG/T 3096-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.

It replaces the earlier edition HG/T 3096-2001, HG/T 3096-1989.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is the Chinese chemical industry standard for rubber seals used on sluice gates. It fixes the requirements for plain rubber seals and for composite rubber seals, together with the test methods, the inspection rules and the provisions on signs, packaging, transport and storage. It applies to the rubber and composite rubber seals fitted to gates in water conservancy and hydropower works. The tests it relies on include GB/T 528, GB/T 531.1, GB/T 532, GB/T 533, GB/T 1682, GB/T 1690, GB/T 3512, GB/T 7757 and GB/T 7759, with HG/T 2729, HG/T 3090 and JB/T 6069. It supersedes HG/T 3096-2001.

HG/T 3096-2011 falls under ICS 83.140.50, in the field of rubber and plastics industries.

This catalogue holds 313 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 528

GB/T 531.1

GB/T 532

GB/T 533

GB/T 1682

GB/T 1690

GB/T 2941

GB/T 3512

GB/T 3672.1

GB/T 5721

GB/T 7757

GB/T 7759

HG/T 2729

HG/T 3090

JB/T 6069

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

HG/T 3096-2001 (earlier edition)

HG/T 3096-1989 (earlier edition)

Standards on related subjects:

GB/T 3672.1-2025 — Tolerances for rubber products - Part 1: Dimensional tolerances

QC/T 639-2004 — Rubber weatherstrips for automobiles

HG/T 3090-1987 — General rules of visual quality for moulded and extruded rubber products

HG/T 2331-2026 — Bladders for Hydraulic Separator-Type Accumulators

HG/T 6181-2023 — Rubber gaskets for engine oil pans

HG/T 4116-2023 — Rubber gaskets for drum washing machine viewing windows

6 Classification and status

International classification (ICS): 83.140.50

Chinese Standard Classification (CCS): G 43

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 3096

EditionTitleRevisionStatus
HG/T 3096-2011Rubber seals for sluice gatescurrent editionCurrent
HG/T 3096-2001Rubber seals for sluice gatesprevious editionSuperseded

This page sells the current edition, HG/T 3096-2011. Earlier editions are listed for reference only.

How to Download HG/T 3096-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3096-2011

$255.00