HG/T 4392-2012Rubber seals for automobile filters (English PDF)
汽车滤清器橡胶密封件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4392-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 28, 2012
Implementation date
June 1, 2013
Scope
HG/T 4392-2012 is the English-translated version of 汽车滤清器橡胶密封件.
The rubber seals fitted to automobile filters are the subject of HG/T 4392-2012, a recommended Chinese chemical industry standard. It classifies the seals and sets their requirements, then the test methods, inspection rules, marking, packaging, transport and storage.
The seals it applies to are those of automotive oil filters and fuel filters. Classification puts it at G43 in China and 83.140.50 internationally, among rubber sealing products.
Its testing draws on GB/T 528, GB/T 531.1, GB/T 1690, GB/T 2828.1, GB/T 3452.1, GB/T 3512, GB/T 6031, GB/T 7758, GB/T 7759, HG/T 2021 and HG/T 3089. Issued on 28 December 2012, it has applied since 1 June 2013.
Found what you need?
Document preview — HG/T 4392-2012
National Standard of the People's Republic of China
- ICS
- 83.140.50
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 4392-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 28 December 2012 and has been in force since 1 June 2013.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
The rubber seals fitted to automobile filters are the subject of HG/T 4392-2012, a recommended Chinese chemical industry standard. It classifies the seals and sets their requirements, then the test methods, inspection rules, marking, packaging, transport and storage. The seals it applies to are those of automotive oil filters and fuel filters. Classification puts it at G43 in China and 83.140.50 internationally, among rubber sealing products. Its testing draws on GB/T 528, GB/T 531.1, GB/T 1690, GB/T 2828.1, GB/T 3452.1, GB/T 3512, GB/T 6031, GB/T 7758, GB/T 7759, HG/T 2021 and HG/T 3089.
HG/T 4392-2012 falls under ICS 83.140.50, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 528
GB/T 531.1
GB/T 1690
GB/T 2828.1
GB/T 3452.1
GB/T 3452.2
GB/T 3512
GB/T 3672.1
GB/T 5720
GB/T 5721
GB/T 6031
GB/T 7758
GB/T 7759
HG/T 2021
HG/T 3089
4 Where this standard sits
It cites 15 standards, listed in full above.
One other standard in this catalogue cites it: QC/T 771-2017.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Standards on related subjects:
GB/T 3672.1-2025 — Tolerances for rubber products - Part 1: Dimensional tolerances
HG/T 4622-2014 — Rubber compounds for seals used for dimethyl ether
GB/T 5721-1993 — General rules of identification, packaging, transportation and storage for rubber sealing products
HG/T 2331-2026 — Bladders for Hydraulic Separator-Type Accumulators
HG/T 6181-2023 — Rubber gaskets for engine oil pans
HG/T 4116-2023 — Rubber gaskets for drum washing machine viewing windows
7 Classification and status
International classification (ICS): 83.140.50
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 528Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
- GB/T 531.1Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
- GB/T 1690Rubber, vulcanized or thermoplastic—Determination of the effect of liquids
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 3452.1Fluid power systems -- O-rings -- Part 1: Inside diameters, cross-sections, tolerances and size identification code
- GB/T 3452.2Fluid power systems -- O-rings -- Part 2: Quality acceptance criteria
Similar standards
How to Download HG/T 4392-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1690-1992 — Rubber, vulcanized-Determination of the effect of liquids
GB/T 1690-2006 — Liquid test methods vulcanized rubber or thermoplastic rubber resistance
GB/T 1690-2010 — Rubber, vulcanized or thermoplastic—Determination of the effect of liquids
HG/T 4392-2012
$135.00