Valid

JB/T 4279.1-2008Verification methods for test instruments and equipment for enamelled winding wires - Part 1: General (English PDF)

漆包绕组线试验仪器设备检定方法 第1部分:总则

Preview PDF

This is a limited preview

Buy now to download the full PDF (16 pages)

Need quotation for your management?

Get a formal quotation for JB/T 4279.1-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

January 1, 2008

Implementation date

January 1, 2008

Scope

JB/T 4279.1-2008 is the English-translated version of 漆包绕组线试验仪器设备检定方法 第1部分:总则.

As Part 1 of the JB/T 4279 series, JB/T 4279.1-2008 is a recommended Chinese mechanical and machinery industry standard giving the general rules for verifying the test instruments and equipment used on enamelled winding wire.

It defines the terms employed, explains how measurement results are rounded, and covers the calibration and verification of the test apparatus, the physical measurement methods and the layout of the test certificate and of the notification of test results.

It is written for the equipment on which enamelled winding wire is tested, and is classified K12 in China and 29.060 internationally. It quotes GB/T 8170. It replaces JB/T 4279.1-1994. It was issued on 1 January 2008.

Found what you need?

Document preview — JB/T 4279.1-2008

National Standard of the People's Republic of China

ICS
29.060
Replacing
JB/T 4279.1-1994

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 4279.1-2008 is issued by Ministry of Industry and Information Technology of the People's Republic of China.

It replaces the earlier edition JB/T 4279.1-1994.

It is one of 29 parts of the JB/T 4279 series.

2 Scope Preview

As Part 1 of the JB/T 4279 series, JB/T 4279.1-2008 is a recommended Chinese mechanical and machinery industry standard giving the general rules for verifying the test instruments and equipment used on enamelled winding wire. It defines the terms employed, explains how measurement results are rounded, and covers the calibration and verification of the test apparatus, the physical measurement methods and the layout of the test certificate and of the notification of test results. It is written for the equipment on which enamelled winding wire is tested, and is classified K12 in China and 29.060 internationally. It quotes GB/T 8170. It replaces JB/T 4279.1-1994. It was issued on 1 January 2008.

JB/T 4279.1-2008 falls under ICS 29.060, in the field of electrical engineering.

This catalogue holds 619 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 8170

4 Where this standard sits

It cites one other standard, GB/T 8170, listed in full above.

16 other standards in this catalogue cite it, among them JB/T 4279.11-2008, JB/T 4279.12-2008, JB/T 4279.13-2008.

It is one part of the JB/T 4279 series, of which this catalogue holds 29 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 16 pages

6 Related standards

Other parts of this standard:

JB/T 4279.2-1994 — DC resistance test apparatus

JB/T 4279.2-2008 — Verification procedure for test equipment of enamelled winding wire - Part 2: DC electrical resistance tester

JB/T 4279.3-1994 — Elongation testers

JB/T 4279.3-2008 — Verification procedure for test equipment of enamelled winding wire - Part 3: Elongation tester

JB/T 4279.4-1994 — Springback testers

JB/T 4279.4-2008 — Verification procedure for test equipment of enamelled winding wires - Part 4: Springback testers

JB/T 4279.5-1994 — Jerk testers

JB/T 4279.5-2008 — Verification procedure for test equipment of enamelled winding wire - Part 5: Jerk tester

JB/T 4279.6-1994 — Peel testers

JB/T 4279.6-2008 — Verification procedure for test equipment of enamelled winding wire - Part 6: Peeling tester

JB/T 4279.7-1994 — Electrically heated forced-ventilation test ovens

JB/T 4279.7-2008 — Verification procedure for test equipment of enamelled winding wires - Part 7: Forced air circulation electric ovens

JB/T 4279.8-1994 — Heat shock breakdown (cut-through) testers

JB/T 4279.8-2008 — Verification procedure for test equipment of enamelled winding wires - Part 8: Softening breakdown testers

JB/T 4279.9-1994 — Unidirectional scrape testers

JB/T 4279.9-2008 — Verification procedure for test equipment of enamelled winding wire - Part 9: Unidirectional scraping tester

JB/T 4279.10-1994 — Solvent resistance testers

JB/T 4279.11-1994 — Breakdown voltage testers

JB/T 4279.11-2008 — Verification procedure for test equipment of enamelled winding wire - Part 11: Breakdown voltage tester

JB/T 4279.12-1994 — Low-voltage continuity testers for enamel coating

JB/T 4279.12-2008 — Verification procedure for test equipment of enamelled winding wires - Part 12: Low-voltage continuity of insulation testers

JB/T 4279.13-1994 — High-voltage continuity testers for enamel coating

JB/T 4279.13-2008 — Verification procedure for test equipment of enamelled winding wires - Part 13: High-voltage continuity of insulation testers

JB/T 4279.14-2008 — Verification procedure for test equipment of enamelled winding wire - Part 14: Solderability tester

JB/T 4279.15-2008 — Verification procedure for test equipment of enamelled winding wires - Part 15: Reciprocating scrape testers

JB/T 4279.16-2008 — Verification procedure for test equipment of enamelled winding wire - Part 16: Static friction coefficient tester

JB/T 4279.17-2008 — Verification procedure for test equipment of enamelled winding wire - Part 17: Dynamic friction coefficient tester

JB/T 4279.18-2008 — Verification procedure for test equipment of enamelled winding wires - Part 18: Refrigerant resistance testers

Other editions:

JB/T 4279.1-1994 (earlier edition)

7 Classification and status

International classification (ICS): 29.060

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

Editions of JB/T 4279.1

EditionTitleRevisionStatus
JB/T 4279.1-2008Verification methods for test instruments and equipment for enamelled winding wires - Part 1: Generalcurrent editionCurrent
JB/T 4279.1-1994Verification methods for test instruments and equipment for enamelled winding wires - Part 1: Generalprevious editionSuperseded

This page sells the current edition, JB/T 4279.1-2008. Earlier editions are listed for reference only.

How to Download JB/T 4279.1-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
16 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 4279.1-2008

$229.00