JB/T 4279.9-2008Verification procedure for test equipment of enamelled winding wire - Part 9: Unidirectional scraping tester (English PDF)
漆包绕组线试验仪器设备检定方法 第9部分:单向刮漆试验仪
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 4279.9-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 1, 2008
Implementation date
July 1, 2008
Scope
JB/T 4279.9-2008 is the English-translated version of 漆包绕组线试验仪器设备检定方法 第9部分:单向刮漆试验仪.
JB/T 4279.9-2008 is a recommended Chinese machinery industry standard covering the unidirectional scraping tester, one of the parts of the verification procedures for test equipment of enamelled winding wire.
It prescribes the test items and the technical requirements for the unidirectional enamel scraping tester, the apparatus used during verification, the test methods, and the handling of the test results.
The tests it provides for are made on unidirectional enamel scraping testers for enamelled round wire. Its Chinese classification is K12 and its international classification 29.060.
JB/T 4279.1-2008 is quoted in the text. The standard supersedes JB/T 4279.9-1994 and was issued by the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 4279.9-2008
National Standard of the People's Republic of China
- ICS
- 29.060
- Replacing
- JB/T 4279.9-1994
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 4279.9-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 February 2008 and has been in force since 1 July 2008.
It replaces the earlier edition JB/T 4279.9-1994.
It is one of 30 parts of the JB/T 4279 series.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard covering the unidirectional scraping tester, one of the parts of the verification procedures for test equipment of enamelled winding wire. It prescribes the test items and the technical requirements for the unidirectional enamel scraping tester, the apparatus used during verification, the test methods, and the handling of the test results. The tests it provides for are made on unidirectional enamel scraping testers for enamelled round wire. Its Chinese classification is K12 and its international classification 29.060. JB/T 4279.1-2008 is quoted in the text. The standard supersedes JB/T 4279.9-1994 and was issued by the Ministry of Industry and Information Technology.
JB/T 4279.9-2008 falls under ICS 29.060, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
JB/T 4279.1-2008 — Verification methods for test instruments and equipment for enamelled winding wires - Part 1: General
4 Where this standard sits
It cites one other standard, JB/T 4279.1-2008, listed in full above.
It is one part of the JB/T 4279 series, of which this catalogue holds 30 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 4279.1-1994 — Verification methods for test instruments and equipment for enamelled winding wires - General
JB/T 4279.1-2008 — Verification methods for test instruments and equipment for enamelled winding wires - Part 1: General
JB/T 4279.2-1994 — Verification methods for test instruments and equipment for enamelled winding wires - DC resistance test apparatus
JB/T 4279.2-2008 — Part 2: DC electrical resistance tester
JB/T 4279.3-1994 — Verification methods for test instruments and equipment for enamelled winding wires - Elongation testers
JB/T 4279.3-2008 — Part 3: Elongation tester
JB/T 4279.4-1994 — Verification methods for test instruments and equipment for enamelled winding wires - Springback testers
JB/T 4279.4-2008 — Verification procedure for test equipment of enamelled winding wires - Part 4: Springback testers
JB/T 4279.5-1994 — Verification methods for test instruments and equipment for enamelled winding wires - Jerk testers
JB/T 4279.5-2008 — Part 5: Jerk tester
JB/T 4279.6-1994 — Verification methods for test instruments and equipment for enamelled winding wires - Peel testers
JB/T 4279.6-2008 — Part 6: Peeling tester
JB/T 4279.7-1994 — Verification methods for test instruments and equipment for enamelled winding wires - Electrically heated forced-ventilation test ovens
JB/T 4279.7-2008 — Verification procedure for test equipment of enamelled winding wires - Part 7: Forced air circulation electric ovens
JB/T 4279.8-1994 — Verification methods for test instruments and equipment for enamelled winding wires - Heat shock breakdown (cut-through) testers
JB/T 4279.8-2008 — Verification procedure for test equipment of enamelled winding wires - Part 8: Softening breakdown testers
JB/T 4279.10-1994 — Verification methods for test instruments and equipment for enamelled winding wires - Solvent resistance testers
JB/T 4279.11-1994 — Verification methods for test instruments and equipment for enamelled winding wires - Breakdown voltage testers
JB/T 4279.11-2008 — Part 11: Breakdown voltage tester
JB/T 4279.12-1994 — Verification methods for test instruments and equipment for enamelled winding wires - Low-voltage continuity testers for enamel coating
JB/T 4279.12-2008 — Verification procedure for test equipment of enamelled winding wires - Part 12: Low-voltage continuity of insulation testers
JB/T 4279.13-1994 — Verification methods for test instruments and equipment for enamelled winding wires - High-voltage continuity testers for enamel coating
JB/T 4279.13-2008 — Verification procedure for test equipment of enamelled winding wires - Part 13: High-voltage continuity of insulation testers
JB/T 4279.14-2008 — Part 14: Solderability tester
JB/T 4279.15-2008 — Verification procedure for test equipment of enamelled winding wires - Part 15: Reciprocating scrape testers
JB/T 4279.16-2008 — Part 16: Static friction coefficient tester
JB/T 4279.17-2008 — Part 17: Dynamic friction coefficient tester
JB/T 4279.18-2008 — Verification procedure for test equipment of enamelled winding wires - Part 18: Refrigerant resistance testers
JBT 4279.10-2008 — Part10:Tester for resistance to solvents
Other editions:
JB/T 4279.9-1994 (earlier edition)
Standards on related subjects:
GB/T 4074.21-2018 — Winding wires test methods—Part 21: Electrical endurance under high frequency voltage impulses
GB/T 4074.3-2008 — Winding wires -- Test methods -- Part 3: Mechanical properties
7 Classification and status
International classification (ICS): 29.060
Chinese Standard Classification (CCS): K 12
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 4279.9
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 4279.9-2008 | Verification procedure for test equipment of enamelled winding wire - Part 9: Unidirectional scraping tester | current edition | Current |
| JB/T 4279.9-1994 | Verification procedure for test equipment of enamelled winding wire - Part 9: Unidirectional scraping tester | previous edition | Superseded |
This page sells the current edition, JB/T 4279.9-2008. Earlier editions are listed for reference only.
How to Download JB/T 4279.9-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 4279.1-2008 — Verification methods for test instruments and equipment for enamelled winding wires - Part 1: General
JB/T 4279.10-1994 — Verification methods for test instruments and equipment for enamelled winding wires - Solvent resistance testers
JB/T 4279.8-1994 — Verification methods for test instruments and equipment for enamelled winding wires - Heat shock breakdown (cut-through) testers
JB/T 4279.9-2008
$105.00