Valid

JB/T 4279.10-1994Verification methods for test instruments and equipment for enamelled winding wires - Solvent resistance testers (English PDF)

漆包绕组线试验仪器设备检定方法 耐溶剂试验仪

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 4279.10-1994 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

January 1, 1994

Implementation date

January 1, 1994

Scope

JB/T 4279.10-1994 is the English-translated version of 漆包绕组线试验仪器设备检定方法 耐溶剂试验仪.

JB/T 4279.10-1994 is the Chinese machinery industry standard covering verification methods for test instruments and equipment for enamelled winding wires - Solvent resistance testers.

It was issued on 1 January 1994 and has been in force since 1 January 1994, as a first edition. The document is under the responsibility of the Ministry of Industry and Information Technology.

This page is published from the official record of the 1994 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 4279.10-1994

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 4279.10-1994 is issued by Ministry of Industry and Information Technology of the People's Republic of China.

It is one of 30 parts of the JB/T 4279 series.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

JB/T 4279.10-1994 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other parts of this standard:

JB/T 4279.1-1994 — General

JB/T 4279.1-2008 — Part 1: General

JB/T 4279.2-1994 — DC resistance test apparatus

JB/T 4279.2-2008 — Verification procedure for test equipment of enamelled winding wire - Part 2: DC electrical resistance tester

JB/T 4279.3-1994 — Elongation testers

JB/T 4279.3-2008 — Verification procedure for test equipment of enamelled winding wire - Part 3: Elongation tester

JB/T 4279.4-1994 — Springback testers

JB/T 4279.4-2008 — Verification procedure for test equipment of enamelled winding wires - Part 4: Springback testers

JB/T 4279.5-1994 — Jerk testers

JB/T 4279.5-2008 — Verification procedure for test equipment of enamelled winding wire - Part 5: Jerk tester

JB/T 4279.6-1994 — Peel testers

JB/T 4279.6-2008 — Verification procedure for test equipment of enamelled winding wire - Part 6: Peeling tester

JB/T 4279.7-1994 — Electrically heated forced-ventilation test ovens

JB/T 4279.7-2008 — Verification procedure for test equipment of enamelled winding wires - Part 7: Forced air circulation electric ovens

JB/T 4279.8-1994 — Heat shock breakdown (cut-through) testers

JB/T 4279.8-2008 — Verification procedure for test equipment of enamelled winding wires - Part 8: Softening breakdown testers

JB/T 4279.9-1994 — Unidirectional scrape testers

JB/T 4279.9-2008 — Verification procedure for test equipment of enamelled winding wire - Part 9: Unidirectional scraping tester

JB/T 4279.11-1994 — Breakdown voltage testers

JB/T 4279.11-2008 — Verification procedure for test equipment of enamelled winding wire - Part 11: Breakdown voltage tester

JB/T 4279.12-1994 — Low-voltage continuity testers for enamel coating

JB/T 4279.12-2008 — Verification procedure for test equipment of enamelled winding wires - Part 12: Low-voltage continuity of insulation testers

JB/T 4279.13-1994 — High-voltage continuity testers for enamel coating

JB/T 4279.13-2008 — Verification procedure for test equipment of enamelled winding wires - Part 13: High-voltage continuity of insulation testers

JB/T 4279.14-2008 — Verification procedure for test equipment of enamelled winding wire - Part 14: Solderability tester

JB/T 4279.15-2008 — Verification procedure for test equipment of enamelled winding wires - Part 15: Reciprocating scrape testers

JB/T 4279.16-2008 — Verification procedure for test equipment of enamelled winding wire - Part 16: Static friction coefficient tester

JB/T 4279.17-2008 — Verification procedure for test equipment of enamelled winding wire - Part 17: Dynamic friction coefficient tester

JB/T 4279.18-2008 — Verification procedure for test equipment of enamelled winding wires - Part 18: Refrigerant resistance testers

5 Classification and status

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download JB/T 4279.10-1994

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 4279.10-1994

$169.00