JB/T 13534-2018Heavy straight-sided single action mechanical presses (English PDF)
重型闭式单动机械压力机
This is a limited preview
Buy now to download the full PDF (23 pages)
Need quotation for your management?
Get a formal quotation for JB/T 13534-2018 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 4, 2018
Implementation date
May 1, 2019
Scope
JB/T 13534-2018 is the English-translated version of 重型闭式单动机械压力机.
JB/T 13534-2018 is a recommended standard of the Chinese mechanical and machinery industry covering heavy-duty straight-side single-action mechanical presses. It fixes the types and basic parameters of these presses and then sets the technical requirements and the safety requirements placed on them.
Test methods and inspection rules follow, together with the provisions on packaging, marking, transportation and storage. The presses it addresses are used mainly for sheet drawing and sheet blanking, and machines put to other uses may take it as a reference.
Classified J62 in China, it was issued by the Ministry of Industry and Information Technology, and it quotes GB/T 150.1-2011 to GB/T 150.4-2011, GB/T 191, GB/T 1800.2-2009, GB/T 3766, GB 4053.1 to GB 4053.3, GB 5226.1-2008, GB/T 7932, GB/T 7935, GB/T 8170, GB/T 13306, GB/T 13575.2-2008, GB/T 15706.2-2007 and GB 17120-2012.
Found what you need?
Document preview — JB/T 13534-2018
National Standard of the People's Republic of China
- ICS
- 25.120.10
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Classification and status
1 Foreword
JB/T 13534-2018 was issued by MIIT on 4 July 2018 and has been in force since 1 May 2019.
2 Scope
This standard is a recommended standard of the Chinese mechanical and machinery industry covering heavy-duty straight-side single-action mechanical presses. It fixes the types and basic parameters of these presses and then sets the technical requirements and the safety requirements placed on them. Test methods and inspection rules follow, together with the provisions on packaging, marking, transportation and storage. The presses it addresses are used mainly for sheet drawing and sheet blanking, and machines put to other uses may take it as a reference. Classified J62 in China, it was issued by the Ministry of Industry and Information Technology, and it quotes GB/T 150.1-2011 to GB/T 150.4-2011, GB/T 191, GB/T 1800.2-2009, GB/T 3766, GB 4053.1 to GB 4053.3, GB 5226.1-2008, GB/T 7932, GB/T 7935, GB/T 8170, GB/T 13306, GB/T 13575.2-2008, GB/T 15706.2-2007 and GB 17120-2012.
3 Normative references
JB/T 13534-2018 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 150.1-2011
GB/T 150.2-2011
GB/T 150.3-2011
GB/T 150.4-2011
GB/T 191
GB/T 1800.2-2009
GB/T 3766
GB 4053.1
GB 4053.2
GB 4053.3
GB 5226.1-2008
GB/T 7932
GB/T 7935
GB/T 8170
GB/T 13306
GB/T 13575.2-2008
GB/T 15706.2-2007 — Safety of machinery -- Basic concepts, general principles for design -- Part 2: Technical principles
GB 17120-2012
4 About this standard
Issued by: MIIT
English translation: about 23 pages
5 Classification and status
International classification (ICS): 25.120.10
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 23 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 150.1-2011Pressure vessels - Part 1: General requirements
- GB/T 150.2-2011Pressure vessels - Part 2: Materials
- GB/T 150.3-2011Pressure vessels - Part 3: Design
- GB/T 150.4-2011Pressure vessels - Part 4: Fabrication, inspection and testing, and acceptance
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1800.2-2009Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
GB 5226.1-2008
Similar standards
How to Download JB/T 13534-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 4053.1-2009 — Safety requirements for fixed steel ladders and platforms - Part 1: Steel vertical ladders
GB 4053.1-2025 — Safety requirements for fixed metal ladders and platform - Part 1: Vertical ladders
GB 4053.2-2009 — Safety requirements for fixed steel ladders and platforms - Part 2: Steel inclined ladders
Secure payment via Stripe
Payments accepted
JB/T 13534-2018
$405.00